lego1234567
New Member
Last Activity: 02-13-2024, 11:33 AM
Joined: 05-28-2022
Location: Presov
-
Click on downloads: [URL]https://dlinkmea.com/index.php/product/details?det=c0lvN0JoeVVhSXh4TVhjTnd1OUpUUT09[/URL]https://Click on downloads: [URL]htt...OUpUUT09[/URL] -
HI. After googling the "HP IPM87-MP motherboard bios download", I found this site [URL]https://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Upgrade-BIOS-HP-Pavilion-500-210qe/td-p/7980380[/URL] . This computer uses the same motherboard as you have. If you go on the HP website and look for support for this computer, you will find this [URL]https://support.hp.com/sk-en/drivers/hp-pavilion-500-200-desktop-pc-series/model/5399833[/URL] . There you can find latest BIOS update. I hope it helps.https://HI. After googling the "HP I...load", I foundLeave a comment:
-
LG 32LB1R - stuck in standby mode
Hi. I have the following problem with my TV. After connecting to mains, the standby led (red) turns on, but TV is not responding to remote control or buttons on TV. After some measurements, I found out that +5 V standby voltage is present, but I dont have ON/OFF signal coming in to turn PSU on. It stays at zero volts. After looking at the schematic of the mainboard, I should get ON/OFF signal coming in at the R1402 resistor, but it stays around +3,5 V. So I removed it and I was able to turn on TV with buttons on TV, but not with remote control.
What could be the problem ? Thanks... -
Re: APC BR550GI Pro UPS not charging battery
I had the same problem as you, battery was not charging at all. After removing and measuring the C18 and C32, I found they had much lower capacity (not any visual damage). After soldering new ones, UPS works fine. Thanks for your efforts !
...
Leave a comment:
No activity results to display
Leave a comment: