Dead Sanyo DP26648 logic board, need service manual.

[Spork Schivago]

Re: Dead Sanyo DP26648 logic board, need service manual.

The television is fixed and the owner has it and is using it. Thanks for all the help guys. The LVDS cable you sent Cashkennedy was different. However, most of the wires were the same. I looked at it and noticed what I did wrong. When the cable got ripped out, the purple wire was put in the wrong place by me.

I used the original cable. I found pictures of LVDS cables from different Sanyo TV's that where close. I couldn't find one for the TV I was working on, but all of them had the purple wire in the same spot. I'm thinking that perhaps the broken logic board I have now would work....maybe I should try selling it as parts. I didn't dare test it though. It was scary enough trying the old LVDS cable again.

Thanks again everyone!

[cashkennedy]

Re: Dead Sanyo DP26648 logic board, need service manual.

Im glad it all worked out in the end!

[budm]

Re: Dead Sanyo DP26648 logic board, need service manual.

Thanks for the great news, too bad with so many mishaps, but that is how you learn, glad that cashkennedy has the spare board and parts for your TV, how lucky is that?