Hi I have a 37"vizio model # VX37L hdtv 10A , No sound no pic , It has black screen with vertical lines ,I took the back cover off and looked over the power supply did not see any thing unusual , the back light is on when it is power up but has to to shut down by removing the wall plug.
I measure the voltage on the P/S while the TV is on with my Dmm and I
get the following voltage measurement.
All 24V is measured 24.53
A voltage is 1.40V
B voltage is 3.56 V
5 voltage is 5. V
Ps on is 3.50
12 volts is 12.2
I have noticed that if I remove the harness from the Tcon board and plug it back in those lines will move over to the left of the screen.Here is a few picture of what the lines look like.
I have a fair amount of electronics knowledge and I can do some component repair if pointed in the right direction.
Any and all help is greatly appreciated.
I measure the voltage on the P/S while the TV is on with my Dmm and I
get the following voltage measurement.
All 24V is measured 24.53
A voltage is 1.40V
B voltage is 3.56 V
5 voltage is 5. V
Ps on is 3.50
12 volts is 12.2
I have noticed that if I remove the harness from the Tcon board and plug it back in those lines will move over to the left of the screen.Here is a few picture of what the lines look like.
I have a fair amount of electronics knowledge and I can do some component repair if pointed in the right direction.
Any and all help is greatly appreciated.
Comment