Hisense 32A4G Vidaa

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Fengo
    Member
    • May 2013
    • 39
    • South Africa

    #1

    Hisense 32A4G Vidaa

    Good day gentleman

    I hope someone can assist.
    I have a Hisense Vidaa tv that only shows dark screen, no picture. It started with vertical lines moving in from the left and would fade away after 5 minutes.

    Currently only show black screen, with sound. Backlights fully working.

    Any help would be highly appreciated.

    Thank you
    Attached Files
  • sigmeyer
    Senior Member
    • Feb 2020
    • 147
    • Serbia

    #2
    Re: Hisense 32A4G Vidaa

    Most likely a bad panel , Check voltages see if you get 12 volts to the tcon or the panel Board, Next check on panel board vgl , vgh voltages see if they come on briefly when you power on the tv , if they do and then go away , its the panel thats faulty most likeyl

    Comment

    • Fengo
      Member
      • May 2013
      • 39
      • South Africa

      #3
      Re: Hisense 32A4G Vidaa

      Hi Sigmeyer

      I get 12v on mainboard flex without screen board attached.
      With screen board attached 12v value change to -1,8v as soon as switched on.

      Other voltages on screen board is:
      VAA 11,8v
      VSS -07,94v
      VCOM 6,25v
      VDD 3,29v
      HVAAF 5,72v

      WP 0v
      SDA 3,29v
      SCL 3,29v

      Thank you

      Comment

      • toshishaikh05@gmail.com
        New Member
        • Sep 2023
        • 4
        • India

        #4
        Re: Hisense 32A4G Vidaa

        Good Day
        plz solution Any help would be highly appreciated.

        Comment

        • nomoresonys
          Badcaps Legend
          • Jan 2013
          • 12181
          • U.S.

          #5
          Re: Hisense 32A4G Vidaa

          Couple things to check, check the little mlc caps on panel driver board for shorts or very low ohms, check the resistors, look up the datasheets for those two IC's, see what kind of voltage you're getting on those.

          Comment

          • toshishaikh05@gmail.com
            New Member
            • Sep 2023
            • 4
            • India

            #6
            Re: Hisense 32A4G Vidaa

            Plz Send detaseet to this model
            cof

            Comment

            • nomoresonys
              Badcaps Legend
              • Jan 2013
              • 12181
              • U.S.

              #7
              Re: Hisense 32A4G Vidaa

              .
              Last edited by nomoresonys; 10-25-2023, 12:17 PM.

              Comment

              • toshishaikh05@gmail.com
                New Member
                • Sep 2023
                • 4
                • India

                #8
                Re: Hisense 32A4G Vidaa

                good day plz solustion

                Comment

                • nomoresonys
                  Badcaps Legend
                  • Jan 2013
                  • 12181
                  • U.S.

                  #9
                  Re: Hisense 32A4G Vidaa

                  Think about it, YOU have the components in front of you, look at them, see small writing on top? put that info into a search, so just put in the search, example: FQPF11N50CF datasheet. DO NOT put that in it is just an example of a random transistor. We can't test these things for you if we don't have the board, understand? A lot of this stuff isn't easy, so you won't solve anything by just putting "good day plz solustion" if you don't want to do the work give the tv away or recycle it.

                  Comment

                  Related Topics

                  Collapse

                  • Ryan.man
                    Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
                    by Ryan.man
                    Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

                    My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

                    This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
                    02-04-2025, 12:23 PM
                  • reformatt
                    Macbook Air M2 A2681 Kernel panics after screen replacement
                    by reformatt
                    Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".

                    It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...
                    07-31-2025, 08:37 PM
                  • smic717394
                    iphone XS turns off when press on screen.
                    by smic717394
                    Hi,

                    I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
                    07-25-2024, 10:16 AM
                  • Runlinc
                    Hisense 55E76GQTUK screen removal?
                    by Runlinc
                    Hi all, I need to change the backlights in a Hisense 55E76GQTUK. The screen is glued to the chassis, what is the easiest way of delaminating the screen from the chassis please?
                    also what double sided tape would you recommend to glue it back in? ….. or is that a question to ask once the screen is out in one piece?
                    Many thanks for any ideas you have.
                    04-09-2024, 10:02 AM
                  • Chrissygizmo
                    Samsung UE55JU6800K half screen dark
                    by Chrissygizmo
                    Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
                    I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
                    02-10-2025, 12:33 AM
                  • Loading...
                  • No more items.
                  Working...