http://hecgroupusa.com/products/swit...atx/hec250srt/
i just bought one of these power supplies off ebay to replace my HEC 200SRT which only has a 60mm fan, the newer HEC has a 80mm a sata connector and 24pin which is nice as the old 200 had none.
anyways i put it in my computer and hit the power and nothing, it was making the light on the motherboard light up. I open it up and see a bulging and leaking CapXon 2200uf 6.3v, now keep in mind ive never replaced the caps in anything. so after fumbling around i took a Nichicon or united chemicom not sure of the brand but it said LXZ 2200uf 10v, took it off a old slot A athlon board, put it in and it fires right up. bios shows all rails within decent spec. anyways is that a decent capacitor to use in a power supply?
i just bought one of these power supplies off ebay to replace my HEC 200SRT which only has a 60mm fan, the newer HEC has a 80mm a sata connector and 24pin which is nice as the old 200 had none.
anyways i put it in my computer and hit the power and nothing, it was making the light on the motherboard light up. I open it up and see a bulging and leaking CapXon 2200uf 6.3v, now keep in mind ive never replaced the caps in anything. so after fumbling around i took a Nichicon or united chemicom not sure of the brand but it said LXZ 2200uf 10v, took it off a old slot A athlon board, put it in and it fires right up. bios shows all rails within decent spec. anyways is that a decent capacitor to use in a power supply?
Comment