-
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
https://www.badcaps.net/donate/
---------------------------------------------------------------------------------------------------------------------------------------------------------------------- -
************************************************** ***********************************
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests
all donations are welcome,
see the donate button at the bottom of the page, or
>>>>> click on this link to donate via PayPal. <<<<<
Every donation made will go towards server fees and maintenance costs.
************************************************** ***********************************Comment
-
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
https://www.badcaps.net/donate/
----------------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
I need this hp serial number
5CD336CDJ4 DMI DATAComment
-
Where do you need this S/N???
read..https://www.badcaps.net/forum/troubl...before-postingDue to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
i need ct number
Comment
-
Thank you very much, I was able to do it thanks to your tutorialRe: hp dmi data tool
open bios dump with UEFITool and search for text "HP_MUD" (no quotes). You'll find it in VSS2 store, view as hex and you'll have there serial, sku, board ID and name of machine.
in FactoryConfig you'll find feature byte, in BuiltID you'll have ... let me think ... right! build ID
and in HP_OA3 you'll have win key.
other way: if your laptop is working and don't have bios dump use Bios Config Utility and in cmd type: biosconfigutility -get:1.txt. you'll find 1.txt. in BCU folder (usually in Program Files(x86)) and you'll see all data there.
3rd way: there is a label on bottom cover ...Comment
-
Problem
This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached.... -
Hello,
This special tool from Apple is used to recover data from Macbook A1706. I've been using it for a while but it stops working. When connecting Thunderbolt 3 between the tool and working Macbook, Macbook should prompt "new device detected, allow or not"... but it doesn't.
Has anyone ever experience this ? It's not a cabling or power supply issue, some IC have stopped working but not sure which one. Probably the one that manager thunderbolt 3
Thanks
Claude... -
Hi, I'm an elevator technician. The attached oscilloscope display picture is from a digital elevator hall arrival lantern data signal. We have been having problems with “ghost signals” causing intermittent hall arrival lanterns to illuminate randomly when the elevator is not actually due to arrive at the floor.
The tech support of the hall arrival board manufacturer (CE Electronics) is blaming the elevator controller manufacturer (MCE), and the tech support of the elevator controller blames the hall arrival board manufacturer.
The boards are powered by a ground referenced... -
Patient is a Maytag/Whirlpool/Kenmore clothes dryer. Not sure of exact model, doesn't matter. All boards are out of production.
Specific problem is a Maytag 8544799 / WP8544799 motor-control board, aka Diehl Controls 708879-05. Customer states the board "doesn't work, motor doesn't run". Not sure how the repairman made that assessment, or if it's even accurate. He can't get replacement boards, and the owner decided to buy a new dryer, so whether this board is the problem is speculation on his part. Again, doesn't matter.
I've been over the board looking for... -
Hello everyone.
I would like to know more about the following topic:
Nand flash on smartphone for data recovery.
I have been reading of people swapping nand flash from a faulty mainboard to another in order to save the data.
But I also read about encrypted data which to be read must been swap also cpu, or nfc or something else where is located the key to make the data being readable.
How does it works? How do I know if data are encrypted or where is the key?
I know there are also very expensive external socket where you can put the nand flash in...08-20-2023, 07:10 AM
Comment