-
-
hello every one
i have dell g5 15 5500
mainboard Selek g3 mlk n18p 19795-1
Service Tag: 2LWMG63
it had short circuit on gpu mosfet
after replacing it came to life but stuck on logo
tried whith to flash another ec.bin it worked but fan are very loud and it shut down after afew minute
can any one fix my ec bios
i uploded both ec and main
best regardsComment
-
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Mọi khoản quyên góp cho Badcaps đều được hoan nghênh . Trở thành người ủng hộ Badcaps >>>>> nhấp vào liên kết này để quyên góp <<<<< Cảm ơn tất cả những người ủng hộ . -------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Mọi khoản quyên góp cho Badcaps đều được hoan nghênh . Trở thành người ủng hộ Badcaps >>>>> nhấp vào liên kết này để quyên góp <<<<< Cảm ơn tất cả những người ủng hộ . -------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Mọi khoản quyên góp cho Badcaps đều được hoan nghênh . Trở thành người ủng hộ Badcaps >>>>> nhấp vào liên kết này để quyên góp <<<<< Cảm ơn tất cả những người ủng hộ . -------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
hello every one
i have dell g5 15 5500
mainboard Selek mlk n18E 19753-1
Service Tag: 519P463
Please clean my file, no displayComment
-
hello
model no: g3 p89f
mb code: selek mlk n18e 19753-1
service tag:42TVC63
Notebook no image keeps restarting I sent the bios backups on it
I think there is a bios problem, I need a new solid bios, please helpComment
-
Off topic, post by the model number in the thread title. This thread is for the G5 15 5500 ,yours is G3 15 3500 , post your request in the G3 15 3500 topic -> https://www.badcaps.net/forum/troubl...3500-bios-helpComment
-
Hello everyone 👋
is there a way to provide the correct Service Tag from this dump files?
i think the bin on the main chip is corrupted and the Tags on the case are faded too 😢
G5 5500
selek mlk n18e 19753 1
Thanks 💙Comment
-
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Mọi khoản quyên góp cho Badcaps đều được hoan nghênh . Trở thành người ủng hộ Badcaps >>>>> nhấp vào liên kết này để quyên góp <<<<< Cảm ơn tất cả những người ủng hộ . -------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
Thanks Sir but no post, won't auto on, fan at full speed, power indicator blinks.Comment
-
Hello guys, i hope i get the help i need here,
I had displays problems with my laptop, it's a Dell G5 15 5500, i took it to some "expert", the display is fine now, while i look at the bios setup, i have the wrong one (screenshot taken) , it shows that i have the G3 3500 with no service tag and asset tag, i guess the expert resetted it and installed another bios?
Hope my problem is well explained, can anyone help me get my laptop setup to its default configuration?
ThanksComment
-
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Mọi khoản quyên góp cho Badcaps đều được hoan nghênh . Trở thành người ủng hộ Badcaps >>>>> nhấp vào liên kết này để quyên góp <<<<< Cảm ơn tất cả những người ủng hộ . -------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
Hello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.
Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,... -
Hi, I hope some one has some advice for me. I searched the forums but didn't see anything relevant. I acquired two identical Dell 9010 Mid Tower computers from a business office upgrade (they were going to throw them out). Both of them have the same motherboard (00F82W). One of them works flawlessly. The other one had a corrupted BIOS. I tried flashing numerous main BIOS and EC files from the internet, but none of them worked. I decided to copy the main BIOS and EC from the working 9010 computer and successfully flashed the corrupted BIOS. This got the computer able to boot again and run norm...04-23-2025, 04:30 PM -
Working on a Dell 5340 new Intel 13th gen with a corrupt bios flash.
Worked good before failed flash now won't power at all.
May have been a bad connection.
Want to get a clean rebuild bios like new motherboard so can input Service Tag on bootup.
32mb chip - 25Q256JVEN
Attach Dell Bios Update file v1.14 - original Dell update... -
Hi folks,
I got a Dell Optiplex 7010 micro PC (Exact Model) with 8FC8 BIOS and locked out admin password. I attempted to remove the password by patching the BIOS via info from this thread: https://www.badcaps.net/forum/troubl...ssword-patcher
After flashing the patched the BIOS, the PC is unresponsive with a solid AMBER power LED (not documented in manual anywhere)
Steps I took:- Read BIOS with CH341a, verified hash twice
- Patched
-
Hi,
My Dell Precision T7910 died after enabling onboard SAS controller and applying RAID settings. There were no hardware changes between working and not working state, only setup (via bios -> controller settings). After applying settings and reboot PC turns on, flash leds (normally) but there's no further action, it just stays on with no graphics and no keyboard led's on. There's no Dell logo, nothing. I've tried resetting bios by jumper, replacing cpu's, replacing ram, removed/replaced cmos battery, disconnecting all drives etc. I've also dumped .bins from mobo chips SLI1 (16...
Comment