Asus Transformer T101HA Bios request

**peste** · 04-14-2021, 10:24 AM

Re: Asus Transformer T101HA Bios request

Originally posted by xd_papi60

Hello to all.
Is there a chance to have a working BIOS for the Asus Transformer Notebook T101HA?
Unfortunately mine is bricked after changing the boot sequence and now it only shows the Asus logo.
I managed to have the Bios dump for the T100HA, but I don't know if it will work on my T101HA.
Any suggestions and help on this will be highly appreciated!
Thanks!

post the original bios of the laptop ... maybe we can fix it ...

**peste** · 07-03-2021, 06:50 AM

Re: Asus Transformer T101HA Bios request

bios Asus T101HA Original .. checked OK, and the same bios clean me and updated ..

Attached Files

**just_bios** · 07-09-2024, 07:07 AM

hey..

can u pls check my bios too..? after bootig usb Win 10 disk device stuck at blue/black screen.. not running windows installation screen..

Attached Files

T101HA_306sw_W25Q64FW 1.8V.rar (3.62 MB, 2 views)

**just_bios** · 07-09-2024, 07:37 AM

and i m always getting this error with all dumps on the forum..

"chip main memory with the contents are in disagreement"

but there is no pb with backup bios file..(T101HA_306sw_W25Q64FW 1.8V)

Attached Files

**SMDFlea** · 07-09-2024, 08:39 AM

Originally posted by just_bios

hey..
can u pls check my bios too..? after bootig usb Win 10 disk device stuck at blue/black screen.. not running windows installation screen..

post the laptop serial number https://www.badcaps.net/forum/troubl...before-posting

Originally posted by just_bios

and i m always getting this error with all dumps on the forum..
"chip main memory with the contents are in disagreement"
but there is no pb with backup bios file..(T101HA_306sw_W25Q64FW 1.8V)

Use alternative software. NeoProgrammer , ASProgrammer ,Flashrom

**just_bios** · 07-09-2024, 10:21 AM

Originally posted by SMDFlea

post the laptop serial number https://www.badcaps.net/forum/troubl...before-posting

Use alternative software. NeoProgrammer , ASProgrammer ,Flashrom

i really dont know which one is SN.. :$

JANOCX100392438
C12PnCH 0B200-02120100M-A1A1A-830-A5L3
LAH CX3LXF1LAJN501810000763 2018 10 15
QCCXF1 F107184300212
60N808KD- C-MB1220-204

i really did.. i have many alternative software.. but now i have another pb.. device is not power on..

only white led blinking 4-5 times..i flashed backup file but still same..

Attached Files

**just_bios** · 07-11-2024, 08:08 AM

Originally posted by just_bios

i really dont know which one is SN.. :$

JANOCX100392438
C12PnCH 0B200-02120100M-A1A1A-830-A5L3
LAH CX3LXF1LAJN501810000763 2018 10 15
QCCXF1 F107184300212
60N808KD- C-MB1220-204

i really did.. i have many alternative software.. but now i have another pb.. device is not power on..

only white led blinking 4-5 times..i flashed backup file but still same..

Neo Programmer Log; backup file used.. still white led blinking..

Programmer for MCU, AVR, SPI FLASH/EEPROM, I2C, Microwire, v2.1.0.19
Current programmer: CH341
SPI ID: EF6017
<<W25Q64FW 1.8V>>
Done
Current programmer: CH341
Old SREG: 00000000(0x00),
New SREG: 00000000(0x00),
Current programmer: CH341
16:50:04
Erasing memory...
The process can take more than a minute on large flash memories!
Success
Execution time: 00:00:49.476
Current programmer: CH341
16:50:53
Verify memory...
Success
Execution time: 00:01:09.537
Current programmer: CH341
16:52:03
Programming memory(verifying)...
Success
Execution time: 00:02:48.845

Attached Files

**just_bios** · 07-11-2024, 08:31 AM

RT809 Flash Log;

018: >------------------------------------OK---------------------------------------<
019: C:\USERS\DL\DESKTOP\T101\ORG_PROGRAMMER.BIN
020: C:\USERS\DL\DESKTOP\T101\ORG_PROGRAMMER.BIN
021: File has been loaded, checksum: 16bits_0x9492 ,32bits_0x54ED9492 :
022: Chip pins contact is detected OK.
023: Chip ID verification OK.
024: UniqueID:0x24772C87150868D8
025: Start writing chip......
026: Auto erasing...
027: Erase successful,Elapsed time:36.49 seconds.
028: Start writing...
029: Write successful,Elapsed time:54.99 seconds.
030: Auto verifying...
031: Verification successful,Elapsed time:8.708 seconds.
032: Status register1 values: 0x0, Status register2 values: 0x16 .
033: Elapsed time: 63.73 seconds,average speed of 131616 bytes/sec.
034: >------------------------------------OK---------------------------------------<
035: Chip pins contact is detected OK.
036: Chip ID verification OK.
037: UniqueID:0x24772C87150868D8
038: Start verifying chip......
039: Chip verification OK, Elapsed time: 8.716 seconds, average speed of 962437 bytes/sec.
040: >------------------------------------OK---------------------------------------<

**just_bios** · 07-12-2024, 05:33 AM

hey again..

Currently selected: W25Q64FW [1.8V] 64 Mbits, 8 Mbytes
!! Adapter required !!
Adapters\CH341\SPI_1.8v_Adapter.jpg

what is the SPI_1.8v_Adapter..? do i need this adapter for this eeprom.? <<W25Q64FW 1.8V>> i can read or earse the eeprom.. still i need it..?

Attached Files

**volinakis** · 07-12-2024, 06:02 AM

Originally posted by just_bios

hey again..

Currently selected: W25Q64FW [1.8V] 64 Mbits, 8 Mbytes
!! Adapter required !!
Adapters\CH341\SPI_1.8v_Adapter.jpg

what is the SPI_1.8v_Adapter..? do i need this adapter for this eeprom.? <<W25Q64FW 1.8V>> i can read or earse the eeprom.. still i need it..?

i see you have also RT809, use SmartID tab, chose 1,8V and 25xx SPI then hit ok tab (is in Chinese but is the tab on the left on bottom window)

**just_bios** · 07-12-2024, 08:39 AM

Originally posted by volinakis

i see you have also RT809, use SmartID tab, chose 1,8V and 25xx SPI then hit ok tab (is in Chinese but is the tab on the left on bottom window)

hey.. software detects the eeprom as W25Q64FV(QPI) but my eeprom is <<W25Q64FW 1.8V>>

022: Auto identified 25 ID is match with the partnumber.
023: http://www.ifix.net.cn/thread-2550-1-3.html
024: The currently selected:W25Q64FV(QPI), capacity: 64Mbits, 8Mbytes.
025: >------------------------------------OK---------------------------------------<

**volinakis** · 07-12-2024, 10:11 AM

Originally posted by just_bios

hey.. software detects the eeprom as W25Q64FV(QPI) but my eeprom is <<W25Q64FW 1.8V>>

022: Auto identified 25 ID is match with the partnumber.
023: http://www.ifix.net.cn/thread-2550-1-3.html
024: The currently selected:W25Q64FV(QPI), capacity: 64Mbits, 8Mbytes.
025: >------------------------------------OK---------------------------------------<

did you select 1.8V?

**just_bios** · 07-15-2024, 05:47 AM

Originally posted by volinakis

did you select 1.8V?

hey..

as u mention above i cannot choose any 1.8v.. if i press the "Smart Identity Smart ID" or "Smart ID" buttons this is the log;

001: Chip pins is detected poor contact.
002: You have chosen "OK", continue to detect Programmer socket pins/interface...
003: Auto identified 25 ID is match with the partnumber.
004: http://www.ifix.net.cn/thread-2550-1-3.html
005: The currently selected:W25Q64FV(QPI), capacity: 64Mbits, 8Mbytes.
006: >------------------------------------OK---------------------------------------<

there is no option like 1.8 or another... my rt809f version is 20240116

Attached Files

**volinakis** · 07-15-2024, 07:13 AM

Originally posted by just_bios

hey..

as u mention above i cannot choose any 1.8v.. if i press the "Smart Identity Smart ID" or "Smart ID" buttons this is the log;

001: Chip pins is detected poor contact.
002: You have chosen "OK", continue to detect Programmer socket pins/interface...
003: Auto identified 25 ID is match with the partnumber.
004: http://www.ifix.net.cn/thread-2550-1-3.html
005: The currently selected:W25Q64FV(QPI), capacity: 64Mbits, 8Mbytes.
006: >------------------------------------OK---------------------------------------<

there is no option like 1.8 or another... my rt809f version is 20240116

for RT809F you have to use 1.8V adapter. Man, do I have to read for you user manual? An if detected "poor contact" you chose to continue operation?

**just_bios** · 07-22-2024, 07:12 AM

Originally posted by volinakis

for RT809F you have to use 1.8V adapter. Man, do I have to read for you user manual? An if detected "poor contact" you chose to continue operation?

hey..

if i use the 1.8v adapter rt809f not detecting the eeprom..

Attached Files

**volinakis** · 07-22-2024, 07:32 AM

Originally posted by just_bios

hey..

if i use the 1.8v adapter rt809f not detecting the eeprom..

"poor contact" - now you want me to read what programmer try to tell you ...

**SMDFlea** · 07-22-2024, 08:14 AM

Originally posted by just_bios

hey..
if i use the 1.8v adapter rt809f not detecting the eeprom..

Why did you post in a seperate thread with the same request https://www.badcaps.net/forum/troubl...os#post3314125 What a f%$£*ing mess you made across 2 threads

**just_bios** · 07-23-2024, 05:02 AM

Originally posted by SMDFlea

Why did you post in a seperate thread with the same request https://www.badcaps.net/forum/troubl...os#post3314125 What a f%$£*ing mess you made across 2 threads

:$ sorry for that.. I just wanted to draw the attention of the thread owner..

**SMDFlea** · 07-23-2024, 05:15 AM

Originally posted by just_bios

:$ sorry for that.. I just wanted to draw the attention of the thread owner..

The CH341A wrote the bios ok,and if the bios dump is tested and working 100% you must have a hardware problem.

Asus Transformer T101HA Bios request

Asus Transformer T101HA Bios request

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment