Macbook Pro A1706 EMC 3163 820-00923-A pass pleas
Collapse
X
-
Re: Macbook Pro A1706 EMC 3163 820-00923-A pass pleas
.Comment
-
Re: Macbook Pro A1706 EMC 3163 820-00923-A pass pleas
SERIAL NUMBER : CO2SWBJ2HF1R ,model : A1706 , board number : 820-00923-A
The Macbook is asking 6 digit PIN code and I'm wondering if it can be removed. I have the original BIOS file. Thank you in advance!Attached FilesComment
-
Re: Macbook Pro A1706 EMC 3163 820-00923-A pass pleas
@danfernando
There was 200h of uncessary 0xFF padding on the end of your file, I have removed it.
Message Authentication Code invalidated and VSS NVRAM cleared, try the attached file and write back.Attached FilesComment
-
Re: Macbook Pro A1706 EMC 3163 820-00923-A pass pleas
Attached FilesDue to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Comment
-
Re: Macbook Pro A1706 EMC 3163 820-00923-A pass pleas
@peste
You have posted an identical firmware back to me that I already unlocked for someone else. I don't understand why you have done this.
@danfernando
Those thanks were for me, and no worries at all.Comment
-
Re: Macbook Pro A1706 EMC 3163 820-00923-A pass pleas
By mistake I posted the unlocked bios to you... of course the "laurels" are yours... now, I hope you understand what happened...Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Hello I need help please thank you in advance
I received a "MacBook Model A1706 " device because it is locked with a passcode and also through recovery mode there is a "EFI" lock.
I forgot to backup the original BIOS file and wrote a file from the Internet.
Now I am facing a problem. In the device disk utility recovery mode, the storage capacity shows only 1 GB and there is no other information or another Partition.
I tried to write several other Bios files and the same thing, there is nothing new, the problem is still the same and it is only 1 GB memory.
I need a file compatible with my device and the serial number that will solve the problem, or if my problem is not the BIOS file in this case, are there any tips and recommendations to solve this problem?
Below you will find all the information about the device, the device model, and also a serial number
I appreciate your help. Best regards
MacBook Model A1706 EMC 3163
Serial: C02VH6N8HV2L
Board ID: 820-00923-A
4 PhotosComment
-
Can anyone help remove the password on this? . Thank you in advance!Comment
-
RULES UPDATE for BIOS requests/offers AVOID BANNING, READ BEFORE POSTING
https://www.badcaps.net/forum/troubl...before-posting
You MUST:- Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://www.badcaps.net/forum/showthread.php?t=88758 ) ,The serial number, make, full model number, motherboard model and revision (except QR codes) must be written/typed at your request as per the rules. Not as a picture, part of the file name and so on.
-
-
greetings please unlock A1706-EMC 3163
S/N C02W26HZHV2L
Attached FilesComment
-
TryAttached FilesComment
-
Hello everyone.
I would really appreciate if someone Could help me with the bios.
Previously the system would require a six digit pass code.
I managed to edit the $SVS hex lines with no luck.
Currently the system after editing sees the boot disk but after trying to boot it goes and asks for a pin number.
Macbook A1706 EMC 3163
Serial number C02V37G9HV2L
Firmware EFI
The original Bios dump is as attachedAttached FilesComment
-
Hello everyone.
I would really appreciate if someone Could help me with the bios.
Previously the system would require a six digit pass code.
I managed to edit the $SVS hex lines with no luck.
Currently the system after editing sees the boot disk but after trying to boot it goes and asks for a pin number.
Macbook A1706 EMC 3163
Serial number C02V37G9HV2L
Firmware EFI
The original Bios dump is as attached
Attached FilesComment
-
Hello everyone.
I would really appreciate if someone Could help me with the bios.
Previously the system would require a six digit pass code.
I managed to edit the $SVS hex lines with no luck.
Currently the system after editing sees the boot disk but after trying to boot it goes and asks for a pin number.
Macbook A1706 EMC 3163
Serial number C02V37G9HV2L
Firmware EFI
The original Bios dump is as attached
Read https://www.badcaps.net/forum/troubl...23#post1622423
Quote: If there is an iCloud pin, you need to perform 3x PRAM reset after removing password. If FindMyMac is still enabled, you have to reinstall macOS while being disconnected from the Internet, then reconnect after logging in and bind to a new Apple account.Comment
-
Mackbook Pro A1706
820-00923-A need Clean ME
serial Number : C02WQ1NNHV2L
Emc 3163
if anyone can help to Clean Me this original dump here ,
machine came in not turning on, when i flashed the the one i cleaned ,
the fan start fast and keep spining fast no post on lcd.
thanks in advanceAttached FilesComment
-
Mackbook Pro A1706
820-00923-A need Clean ME
serial Number : C02WQ1NNHV2L
Emc 3163
if anyone can help to Clean Me this original dump here ,
machine came in not turning on, when i flashed the the one i cleaned ,
the fan start fast and keep spining fast no post on lcd.
thanks in advance
Attached FilesComment
-
Related Topics
Collapse
-
by DanielreinaaHola chicos, espero estén bien, he estado buscando información para aprender a hacer eliminación de password EFI en macbooks.
Actualmente tengo un problema con una macbook pro A1706 820-00923 SN:C02VD3GJHV2Q
Si podrian ayudarme les agradeceria mucho o algun link para aprender a hacerlo y no volver a molestarles.
gracias de antemano y que tengan una linda tarde, disculpen si estoy rompiendo alguna norma.
Hi guys, I hope you are doing well, I have been looking for information to learn how to remove the EFI password on macbooks.
...-
Channel: BIOS Requests ONLY!
-
-
by capon5153hello,
so i have an macbook pro A1706, motherboard 820-00923, everything works and it does charge without a problem but when i plug anything to the usb c it doesnt do anything, it doesnt give 5V on usb drive or any other peripheral,
i have opened the macbook and i can see some little corrosion on C7601 and C6950,, i have cleaned it and i measure 15v on C6950 PPVBAT_G3H_CONN -
by B2L_RepairsHi guys i am new to macbook repairs (i mostly do microsoldering on iphones and android devices. I need your assistance with macbook a1706 (touchbar edition) that came in without touchpad and keyboard functionality. External keyboard and mouse does work but the keyboard and touchpad on the macbook does not work. I changed the touchpad flex, also replaced the touchpad but the issue persisted. I then measured voltage on the board and found that PIN 44-50 of the touchpad connector (J4501) got 11.2V instead of 12.6V. Those pins required 12.6v and they get their 12.6v from PPVIN_S4-TPAD_FUSE . I measure...
-
by obelix24I just got in my hands one Macbook pro A1706. It was originally not turning on (only 5V 0,2a on all ports (and 3 ports were restarting ampmeter when connected)
I've replaced one CD3215C00 IC and now macbook is fully working (20V and charging fine)
There is only 1 issue that one USB-C port is taking 20V but 0A (after replacing CD3215 it was fully working and i was charging macbook on this port) but then it just turns off (ampmeter) and started with only 20V 0A.
There were some broken pads under CD3215 but i've recreated them.
What should be...05-22-2024, 08:04 AM -
- Loading...
- No more items.
Comment