Tried the BIOS, and it does not fix the issue: laptop still turns on and off, on repeat. Thought that maybe ME cleanup would review it but no luck. Probably an electrical failure. Anyway, thanks for preparing the BIOS.
-
-
Re: ME Firmware Cleaning Guide
Hello Friends ..some questions !
1 - Why we must disable : Generates intermediate file in FTIC ! yes ti no
2 - When we must clean : PMC / PHHC / PHY / GSC ..
Any explaination of the rule of this firmware repository !
Thank youLeave a comment:
-
Re: ME Firmware Cleaning Guide
Hi, sorry for the delay. Dumps are attached:Leave a comment:
-
-
-
-
Re: ME Firmware Cleaning Guide
Here's the BIOS, or, more precisely, the full dump of IC that appears to contain BIOS:Leave a comment:
-
-
Re: ME Firmware Cleaning Guide
Hi,
trying to clean ME region in HP Zbook 15 G3. Working with full BIOS dump, which is 16 MB (16777216 bytes), done using ch341a. MEAnalyzer says that Version is 11.8.70.3626 and Flash Image Tool is 11.0.22.3001.
Using Flash Image Tool v11.8.86.3877 (from package CSME System Tools v11 r46.rar) I get this error:
Error 16: Not a valid file type.
Error 10: Failed to open with processed commands.
Could the dump be corrupted or am I doing something wrong?
(Dump can be opened in UEFITool, no errors there).Leave a comment:
-
Re: ME Firmware Cleaning Guide
hi thank you for this info.more power and goeblssLeave a comment:
-
Re: ME Firmware Cleaning Guide
[QUOTE=osman68i;1137393]Hi,
I am trying to clean me with fit version 15.
but i get error
/QUOTE]
You can see follow post
https://winraid.level1techs.com/t/he...-error/90013/6Last edited by SMDFlea; 05-22-2023, 05:46 AM.Leave a comment:
-
-
Re: ME Firmware Cleaning Guide
Hi
Thanks for response.
Yes there is ME Subpartition.
I'll try that one.
ThanksLeave a comment:
-
-
Re: ME Firmware Cleaning Guide
Hi
I am trying to clean a Razer Blade 15 BIOS.
But I cant find ME Region.bin in the fit Dump folder.
Any idea what I am doing wrong??
CheersLeave a comment:
-
-
Re: ME Firmware Cleaning Guide
I would go for the lowest one, has cor_lp_c_npdm, look at the chipset on MEI. The highlighted one has cor_lp_hd. Would someone more experience corroborate?Leave a comment:
-
Re: ME Firmware Cleaning Guide
Hey, awesome guide, but there is something I don't understand. How do I know which ME version to use? I found the correct version number, but which one of the four should I choose? How would I go about figuring that out? (See pic)Attached FilesLeave a comment:
-
-
If you have to clean the ME firmware on **some microsoft surface models the touchscreen can stop working.
** Some models do not need this fix.
*You should install the latest updates from microsoft,including the driver packs before assuming there is a hardware problem.* - See Post #2
EDIT: If nothing else works try this fix - https://www.badcaps.net/forum/showpo...8&postcount=40
Always check a working dump from the same model using FIT.If the working dump default setting for "Integrated Sensor Hub Supported" is set to "NO"... -
i know a tool https://github.com/MuertoGB/MacEfiToolkit is capable of SN change and Clean ME but not updating EFI Version of the BIN file. is there a guide or a BIOS structure to update the firmware??...03-06-2024, 01:34 AM -
Hello to everyone ,
This is my first post here, and i would like to share with you a small story in case you can help me.
Docker Type-C Gen 2 - Model 40AS. Was given to me by a friend for free ,but with the problem that you cannot use the video output ports.
All ports work , USB , Ethernet, Type C ... but HDMI + Display Port don't work
I searched on reddit and google for problem similar to that, and a LOT of people had fixed this problem by updating the firmware. So i tried , i searched and found 1.1.13 utility and 1.1.20 utility that can help...02-10-2024, 02:07 PM -
Hi guys.
I've got a Ubiquiti US-8-150W POE switch which has issues with updating the firmware.
Turned out to be a bad EEPROM chip. It would read the firmware and work as normal, but failed to write new firmware to it.
So I took off the chip and read on EEPROM and saved it. Wrote to old chip and failed to write
Got New chip and writes good.
THE PROBLEM...
It fails to fully load the firmware, POE lights fail to work during g firmware test during load. I'm suspecting bad EEPROM Read.
Does anyone have a Good Firmware I can have?... -
Hello Badcaps Community,
I purchased a preowned AOC monitor that is not working and out of warranty. It was sold as not working. I am looking for guidance on self-repair. In particular, I am after the firmware for the monitor. At the end, I have included monitor model information and links to pics and vids of the issue.
The problem is that it will not display a picture on any of its inputs. And the on-screen menu does not appear. The power button works properly. It powers on with the remote as well. But the on-screen menu does not appear, even when not connected to any...
Leave a comment: