What bios programmer to get

[Stevie2001]

Which bios programmer to get that works for all laptops.
Can you advise

[BremiX]

Re: What bios programmer to get

I use CH341A programmer. But for 1.8v chips you will need to get an adapter.

[Stevie2001]

Re: What bios programmer to get

I use CH341A programmer. But for 1.8v chips you will need to get an adapter.

Is tl866cs any good

[akande]

Re: What bios programmer to get

Is tl866cs any good

very good bro

[mcplslg123]

Re: What bios programmer to get

You can consider Rt809F which is very cheap and efficient as well. For 1.8v chip you need to use adapter. It can program Ene kbc also.

[KvnTM]

Re: What bios programmer to get

I actually use an Arduino. Slower but it works

[Stevie2001]

Re: What bios programmer to get

Thanks guys

[Siddig]

Re: What bios programmer to get

tl866cs its best for bios
Rt809F it's good for bios and ene and it Io chip
Svod 3 it's good for all kbc Io programing

[Stevie2001]

Re: What bios programmer to get

tl866cs its best for bios
Rt809F it's good for bios and ene and it Io chip
Svod 3 it's good for all kbc Io programing

The tl866cs wil that work on most modern laptop bios

[snsent]

Re: What bios programmer to get

Im using EZP2013... Can use with offset bios file...

[tomodachi]

Re: What bios programmer to get

The tl866cs wil that work on most modern laptop bios

I own both TL866CS and RT809F, RT809F will be your best bet,
Tl866CS is good but very slow at programming.
RT809F will be there for programming most KBC chips such as ITE8586E and KB9012~22 series but you will need an adapter which is not very expensive. And another adapter for 1.8V chips.

[Stevie2001]

Re: What bios programmer to get

Aslong the tl886cs does the job its ok.
Can it programme aio ic also

[tomodachi]

Re: What bios programmer to get

Aslong the tl886cs does the job its ok.
Can it programme aio ic also

No, it only flashes SPI, eprom or pic

[Stevie2001]

Re: What bios programmer to get

No, it only flashes SPI, eprom or pic

Ok thank's just to be clear.
To flash the ITE ic's and other similar sized one's what's the board name that does it

[SMDFlea]

Re: What bios programmer to get

RT809H ,you`ll need kbc adapters, its also a bios programmer.

Vertyanov programmer , the original kbc programmer. Only for kbc, and edid


SVOD3 KBC,SPI, NAND and eMMC support coming.

[playit]

Re: What bios programmer to get

hi.. i have dg41cn motherboard ,bios chip is 25Q16BVAIG ,can i flash it with eeprom CH341A? i am thinking of buying it ,if it would help.. thanks

[zak1n]

Re: What bios programmer to get

Hello guys, I found this website about programming kb9012 with ch341A programmer. Somebody tried or is it even possible? I need flash kb only once in my life so it is useless to spend money for rt809F
http://dangerousprototypes.com/docs/...ith_Bus_Pirate

[kiraro]

Re: What bios programmer to get

Hello guys, I found this website about programming kb9012 with ch341A programmer. Somebody tried or is it even possible? I need flash kb only once in my life so it is useless to spend money for rt809F
http://dangerousprototypes.com/docs/...ith_Bus_Pirate

yes i successfully flash kb9012 with ch341A