Bios HP 840 g1 - 6050A2560201-MB-A03

[servicepcpascani@gmail.co]

Hello!
I am also attaching a bios below that has a password.
hp 840 g1 serial: cnu8309h9r / product: d1f44av
can someone help me with this bios to remove the password?

thanks

[SMDFlea]

Hello!
I am also attaching a bios below that has a password.
hp 840 g1 serial: cnu8309h9r / product: d1f44av
can someone help me with this bios to remove the password?

thanks

Thread merged. You havn`t posted your backups but theres no need, try the HP unlocking tools, read the password guides

BIOS guides, methods, resources and tools
https://www.badcaps.net/forum/troubl...rces-and-tools

[Jnmbc20]

Hello all, I downloaded from this forum BIOS dump and flashed the above laptop which initially wasn't displaying anything. It worked, but after a couple of months it has started a strange problem.
When I press the power button, it comes on but no display, I have to plug in the charger, then pull out, then plug it in again for it to display.
I have included both BIOS and (I guess), EC dump for anyone with a know to look at it. Thanks in advance.
S/n: 5CG5032N6V
P/n: D8R83AV
PCID: A3009DD10303
MB: 6050A2560201-MB-A03

[peste]

merged post..next time look for a thread with the name and model, motherboard model of the laptop, and post there, if you can't find it, then make a new thread..

[shiyab]

Hello all, I downloaded from this forum BIOS dump and flashed the above laptop which initially wasn't displaying anything. It worked, but after a couple of months it has started a strange problem.
When I press the power button, it comes on but no display, I have to plug in the charger, then pull out, then plug it in again for it to display.
I have included both BIOS and (I guess), EC dump for anyone with a know to look at it. Thanks in advance.
S/n: 5CG5032N6V
P/n: D8R83AV
PCID: A3009DD10303
MB: 6050A2560201-MB-A03

hi try

[Jnmbc20]

hi try

Thank you very much for your quick response. The dump worked! The only problem left is taking 15 seconds to display after power button press. There is a message: Warning!! Machine not in a committed state.
How do i solve this? I have tried before to work with various NbDmiFit to modify serial numbers and commit a machine with no success.
What is it that Iam not doing right?
Will appreciate any help on that.

[SMDFlea]

Clean the ME firmware

[Jnmbc20]

Thank you very much for your quick response. The dump worked! The only problem left is taking 15 seconds to display after power button press. There is a message: Warning!! Machine not in a committed state.
How do i solve this? I have tried before to work with various NbDmiFit to modify serial numbers and commit a machine with no success.
What is it that Iam not doing right?
Will appreciate any help on that.

SMDFlea Kindly if you can assist with cleaning the ME firmware, i would really appreciate. I dont know where i miss the turn, and I'm still reading bios ME clean guidlines between my tight schedules.
Regards

[hoaca388]

SMDFlea Kindly if you can assist with cleaning the ME firmware, i would really appreciate. I dont know where i miss the turn, and I'm still reading bios ME clean guidlines between my tight schedules.
Regards

HP EliteBook 840 G1 Base Model Notebook PC

[Jnmbc20]

HP EliteBook 840 G1 Base Model Notebook PC

Hello hoaca388, your BIOS powered and displayed but it got stuck at HP logo. I tried with different chips and the results were just the same.

[Norag33]

Re: Bios and Schematic HP 840 g1 - 6050A2560201-MB-A03

try with this

It worked thanks