---------------------------------------------------------------------------------------------------------------------------------------------------------- All donations to Badcaps are welcome. Become a Badcaps supporter >>>>>click on this link to donate <<<<< Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------
I get no charging light and the laptop can not be turned on.
Check solder.
---------------------------------------------------------------------------------------------------------------------------------------------------------- All donations to Badcaps are welcome. Become a Badcaps supporter >>>>>click on this link to donate <<<<< Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------
I have checked the soldering of 25R256JWEQ and it seems to be ok.
What should I do with W25Q128JNSQ ?
Should I leave the original BIOS inside?
With the original BIOS the pc would not boot and would not charge.
When I used the OF_W25Q128JW1.8V@SOIC8.BIN BIOS from Alegoff, the laptop could charge and it could power on but the ESC,F1, F4 lights were blinking.
Afterwards, I tried to flash other BIOS dumps to the same chip and from that point on, the Laptop could not be charged.
Even if I dump OF_W25Q128JW1.8V@SOIC8.BIN again, there is no charging light.
(Till now I have not desoldered the W25Q128JNSQ since I can read and write to the chip with the SOIC8 clip).
As a reminder, the first time this issue happened was because of a failed BIOS update from Lenovo as described in the first post.
How should I proceed?
I have checked the soldering of 25R256JWEQ and it seems to be ok.
What should I do with W25Q128JNSQ ?
Should I leave the original BIOS inside?
With the original BIOS the pc would not boot and would not charge.
When I used the OF_W25Q128JW1.8V@SOIC8.BIN BIOS from Alegoff, the laptop could charge and it could power on but the ESC,F1, F4 lights were blinking.
Afterwards, I tried to flash other BIOS dumps to the same chip and from that point on, the Laptop could not be charged.
Even if I dump OF_W25Q128JW1.8V@SOIC8.BIN again, there is no charging light.
(Till now I have not desoldered the W25Q128JNSQ since I can read and write to the chip with the SOIC8 clip).
As a reminder, the first time this issue happened was because of a failed BIOS update from Lenovo as described in the first post.
How should I proceed?
Dump W25Q128JNSQ , post here.
---------------------------------------------------------------------------------------------------------------------------------------------------------- All donations to Badcaps are welcome. Become a Badcaps supporter >>>>>click on this link to donate <<<<< Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------------------------------------- All donations to Badcaps are welcome. Become a Badcaps supporter >>>>>click on this link to donate <<<<< Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------
I still get no charging light and the laptop can not boot.
Give up
---------------------------------------------------------------------------------------------------------------------------------------------------------- All donations to Badcaps are welcome. Become a Badcaps supporter >>>>>click on this link to donate <<<<< Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------
Comment