Dell Lattitude FDZ41 LA-J372P REV 1.0 32 MB
Collapse
X
-
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Mọi khoản quyên góp cho badcaps đều được hoan nghênh, hãy nhấp vào liên kết này để quyên góp. Cảm ơn tất cả những người ủng hộ---------------------------------------------------------------------------------------------------------------------------------------------------------------- -
Hi everyone, good day to all,
here I attached corrupted bios file plz help me to get a clr file
Model - precision 55302 in 1
Service tag-JJTYSQ2
Board-DAZ10 LA-F221PAttached FilesComment
-
Service Tag: JJTYSQ2
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Mọi khoản quyên góp cho badcaps đều được hoan nghênh, hãy nhấp vào liên kết này để quyên góp. Cảm ơn tất cả những người ủng hộ----------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
Hello,
Received a Dell Laptop with some problems on startup (long delays, no-POST, reset) and manufacturer mode is active all the time.
Even after writing ST and ALT+F on startup.
Bios chip looks re-soldered and some plastic surrounding it show signs of hot air blow. .
So I think it was reprogrammed with another computer dump.
Me Region read from chip: 14.1.67.2046
Tested with some dumps from bios request / pwd unlock thread.
and got one working very well (fast boot , exit from Man mode ok) but not detect ssd nvme.
Me Region of this partially working bios: 14.0.39.1339
Attached both dumps.
Dell Latitude 5410 (RegModel: P98G)
MB: LA-J372P Rev 1.0
Bios Chip: XMC QH256BXIQ (32MB)
ST:1GJ08C3
Attached FilesComment
-
Hello,
Received a Dell Laptop with some problems on startup (long delays, no-POST, reset) and manufacturer mode is active all the time.
Even after writing ST and ALT+F on startup.
Bios chip looks re-soldered and some plastic surrounding it show signs of hot air blow. .
So I think it was reprogrammed with another computer dump.
Me Region read from chip: 14.1.67.2046
Tested with some dumps from bios request / pwd unlock thread.
and got one working very well (fast boot , exit from Man mode ok) but not detect ssd nvme.
Me Region of this partially working bios: 14.0.39.1339
Attached both dumps.
Dell Latitude 5410 (RegModel: P98G)
MB: LA-J372P Rev 1.0
Bios Chip: XMC QH256BXIQ (32MB)
ST:1GJ08C3
Service Tag: 1GJ08C3Attached Files
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Mọi khoản quyên góp cho badcaps đều được hoan nghênh, hãy nhấp vào liên kết này để quyên góp. Cảm ơn tất cả những người ủng hộ----------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
Comment
-
-
Dell 5410
FDZ41 LA-J372P Rev 1.0
It doesn't turn on.
It has all the voltages.Attached FilesComment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
Related Topics
Collapse
-
by zeniusHello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.
Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,...-
Channel: BIOS Requests ONLY!
-
-
by mikeybassHi, I hope some one has some advice for me. I searched the forums but didn't see anything relevant. I acquired two identical Dell 9010 Mid Tower computers from a business office upgrade (they were going to throw them out). Both of them have the same motherboard (00F82W). One of them works flawlessly. The other one had a corrupted BIOS. I tried flashing numerous main BIOS and EC files from the internet, but none of them worked. I decided to copy the main BIOS and EC from the working 9010 computer and successfully flashed the corrupted BIOS. This got the computer able to boot again and run norm...
-
Channel: General Computer & Tech Discussion
04-23-2025, 04:30 PM -
-
by jhanraHi there masters, recently i got a dell 5400 chromebook and wanted to install windows, i searched the internet and i found out other people also wanting a UEFI bios for this model, i searched there is a R/W legacy, but there are bugs like keyboard/trackpad not working, and hard to install.
so i decided to try to port one, this bios is based on dell 5400 windows version, i am testing this bios for a week now an found only a little to no bug at all in windows 10, or only a minor issue
in windows 11 sound driver compatibility, but overall its ok, for me i can deal with it, 😅😅😅...-
Channel: BIOS Requests ONLY!
-
-
by gizahaDell latitude 5580, motherboard cdp 80 la-e151p
3 amber 3 white blinks. Dell website sais it's problem "bios recovery" and suggested solution "recovery image not found"
(from here https://www.dell.com/support/manuals...e7a&lang=en-us)
I try plugging charger while pressing ctrl+esc, machine turns on, nothing and after 20 seconds it gives 3 amber 3 white blinks again.
Since ssd is replaced and had clean install windows, i've... -
by mrrubikHi folks,
I got a Dell Optiplex 7010 micro PC (Exact Model) with 8FC8 BIOS and locked out admin password. I attempted to remove the password by patching the BIOS via info from this thread: https://www.badcaps.net/forum/troubl...ssword-patcher
After flashing the patched the BIOS, the PC is unresponsive with a solid AMBER power LED (not documented in manual anywhere)
Steps I took:- Read BIOS with CH341a, verified hash twice
- Patched
-
Channel: BIOS & Schematic Requests!
- Loading...
- No more items.
Comment