well k53SV turning on 0.02 amp of consume WTF ?

[highpulse]

well received this one , and im stucked a bit .

first no schematic ... second i really dont find any clock gen on this board ..
third , i got 3.3 and 5 volts ok , all outher coils 0 volts .
made few tests with KBC , it seemd ok , but i replaced even like this ,, still the same .
replaced HM65 the same , bios replaced the same .

it simple does turn on when pressing on off , but consume is 0.02 amp .
replaced cpu as well , still the same ,

any taughts ?

gpu could make this ? the only thing i didnt touched .

but what about the clock gen ??? really there is no QFN for clockgen, any help will be welcome

[highpulse]

Re: well k53SV turning on 0.02 amp of consume WTF ?

OHH ANOTHER INFO , ALL PINS OF BIOS GOT 3,3 VOLTS , EXCEPT PIN 4 gnd . , ISN'T THAT WEIRD ?

[highpulse]

Re: well k53SV turning on 0.02 amp of consume WTF ?

no ideas :P ?

[dj_ricoh]

Re: well k53SV turning on 0.02 amp of consume WTF ?

Focus on bios chip.

Not all pins got 3.3v. Some of them are data and got under 1v

[dj_ricoh]

Re: well k53SV turning on 0.02 amp of consume WTF ?

Do you got a scope? See if you got any activity.

[highpulse]

Re: well k53SV turning on 0.02 amp of consume WTF ?

no i dont have , yet exactly , i should have lower voltages on pin 1 2 and 5 and 6 , but all pins are with 3.3 ,,, and that what is killing me and without schematic , pain in the ass , weird is that both things that can make SPI to be inregular is the KBC or PCH both were replaced and still the same issue.

[dj_ricoh]

Re: well k53SV turning on 0.02 amp of consume WTF ?

If you lift up bios same 3.3v on pads?

Maybe the bios is culprit inside

[highpulse]

Re: well k53SV turning on 0.02 amp of consume WTF ?

sorry ricoh i was out in formation

well lifted the bios chip , and got 3.3 volts on pin 8 7 3 and 2 , all outher are 0 in this moment without the bios , bether that before , i tryed several bios dumps bnut always the same , replaced bios chip and the same , still , i got here my original dump if someone want to build me a new bios ,

[highpulse]

Re: well k53SV turning on 0.02 amp of consume WTF ?

well even after reprograming with another bios now , once i solder it , 3.3 volts on all pins except , pin4 .

now im thinking spi usually come from PCH , replaced the pch and makes the same as the outher .. got stuck here

[dj_ricoh]

Re: well k53SV turning on 0.02 amp of consume WTF ?

I know its stupid but i have to say it.

Power button its ok? I swear i found a few with power button fubar.

[ktmmotocross]

Re: well k53SV turning on 0.02 amp of consume WTF ?

u can make led diode bios check like i see somewhere./youtube?/