Sparklingx
Member
Last Activity: 10-26-2024, 10:55 AM
Joined: 07-14-2024
Location: Dhaka
-
thank you for a detailed answer. It gives me more options to check. I'll check them.... -
its not I can assure you 100%...Leave a comment:
-
HP 450 g1 keeps turning on even tho shutdown/sleep
HP 450 g1 keeps turning on even tho I shutdown/sleep . one way to stop the turning on cycle is pressing the power button few seconds thus force powering it off. But then sometimes it does not turn on at all but next day I try again to turn it on and it turns on.... -
t56 is obviously better but just for casual bios flashing 😒 ezp2023+ is more than enough imo. assuming you dont have a repair shop. 9 . Did you check your chip voltage? is it 1.8v?...Leave a comment:
-
hi,
I have an Asus H110M - K (rev 1.02) motherboard got from my friend. problem is someone flashed a stock bios downloaded from asus website. So even I have dumped the flashed bios in it, I can get no info like ME, mac, uuid etc..... After reading countless posts and guides I have learnt that I need them an im novice Hence posting here.
Here is the dumped bios attached.
So can anyone give me a proper bios for this motherboard ?
And photos of the motherboard attached too it has some numbers, dont know what is what .
[ATTACH=JSON]{"alt":"Click...Leave a comment:
-
My question is.
1. I have previous bios dump but ( may be someone flashed bios directly downloaded from asus site) but I dont have any data.
No ME, UUID, MAC nothing I can extract from previous bios hence the mobo is dead rn and I want to revive it.
What to do now?
see attachment....Leave a comment:
-
The one I have mentioned has 3.3v and 5v switch(adjustable) only lacking is 1.8v .... I know about this green adjustable version from aliexpress too but doubt it someone is not having problem without a big cap using the test clip, disconnecting the moment clip touches the chip or reading but not erasing or writing software hanging sudden connection drop etc unstable situation. . I dont trust chinese SMD caps. May be it is because of chinese low quality SMD caps and voltage dropping too low. Anyway its fixable so yes get between these two but know the symptoms and how to fix it. A big cap is necessary...
Leave a comment:
-
You will find the one I have recommended in ebay. Or if you face the symptoms I have mentioned you can solder a 10v 100uf or above cap(im using 10v 470uf) with it also you can solder a smd ceramic cap(1uf or above) parallally if you want. adding the electrolytic one will do the job just fine....Leave a comment:
-
Here is the old bios bin file(dumped using neoprogrammer, can find uuid here) . zipped and uploaded . May be
now I will have to manually enter uuid from the mobo box?...Leave a comment:
-
No you shouldnt buy any of them. Try to understand what I am trying to say. Chip is not the matter here. That big electrolytic capacitor in important....Leave a comment:
-
I can not upload/attach bin file to my post!!
[ATTACH=JSON]{"data-align":"none","data-size":"full","title":"image.png","data-attachmentid":3450950}[/ATTACH]​I can not upload/attach bin file to my post!!
[ATTACH=JSON]{"data-align":"none","data-size":"full","title":"image.png","data-attachmentid":3450950}[/ATTACH]​...Leave a comment:
-
I tried the software to read the dump file. but I can not find any UUID or mac or any data showing in the software. May be I have to manually add them to make new bin and flash it?
Picture attached: tried to read old bios dump.
and bios bin file is attached using external link:*************************...Leave a comment:
-
SMD ceramic capacitor capacitance & voltage
what is the easiest way to measure the capacitance of SMD ceramic capacitors and its rated voltage?...
-
ASUS UEFI bios find MAC Address, UUID and MB/SN
mobo: ASUS H110M-K
How to find MAC ADDRESS, UUID and MB/SN from previous dump of this mobo's bios?
I am guessing I need to add those in the new bin file.
also where can I find those on the physical motherboard(no box)
Bios dump is added. -
Everyone is buying the wrong CH341 programmer
Everyone is buying the wrong CH341A programmer, I have learned from my mistake. Don't buy the Black one or Green one.
Buy this one in the photo. Most stable and all your common problems (reading but not writing/erasing, software hanging, disconnects after attaching chip, test cable connected but chip not found/ device disconnected) will be gone.
Otherwise you'll have to solder capacitor from GND to VCC if you have those symptoms in your black or green miniprogrammer.... -
I got mine for a discount, 4.5$ including test clip & 2 sop16/8 - dip8 board...Leave a comment:
-
you can try one thing connect a capacitor from GND to VDD then try. your's and mine are same board and chip(CH341B not A)...
Leave a comment:
-
hi what is the job of "pin 25" ? In my programmer pin 25 is not soldered but mine works fine(read,erase,write,verify)...Leave a comment:
-
okk. my bios is 3.3v...Leave a comment:
-
you are correct 450 g1 but the chip is "MX 25L 6473E"...Leave a comment:
No activity results to display
Leave a comment: