DV6-3113ST No +vgacore power

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ahmetozay
    Senior Member
    • Jul 2013
    • 73
    • turkey
    #1

    DV6-3113ST No +vgacore power

    Hello, this unit came as there was no picture on the screen. it takes 1A and stops there, also with debug card it shows DIMM as error. I replaced several rams but still shows DIMM error. Then i checked +vgacore and it was 0v.

    19v comes to PU13 which is vgacore chip
    5v comes to VDD and VDDP
    0v comes to EN/DEM

    Motherboard model is: DA0LX6MB6H1 Rev.H
    Attach is the pdf schematic.

    Any advices welcome. Thanks
    Attached Files
    Tags: None
    • khaahk
      Badcaps Veteran
      • Dec 2013
      • 756
      • Estonia
      #2
      Re: DV6-3113ST No +vgacore power

      Some boards only the upper memory slot works when one dimm installed. Secondly, bios would be my guess...

        Comment

        • ahmetozay
          Senior Member
          • Jul 2013
          • 73
          • turkey
          #3
          Re: DV6-3113ST No +vgacore power

          Originally posted by khaahk
          Some boards only the upper memory slot works when one dimm installed. Secondly, bios would be my guess...
          Thanks for the reply, i tried both dimm slot with different rams, also i tried working bios from the same model. i flashed both the kbc and main bios.

          all i got it gets 1A and stays there, Debug card shows DIMM error and the board has no +vgacore voltage. Any advices welcome thanks.

            Comment

            • ktmmotocross
              Boardkiller
              • Feb 2014
              • 3577
              • slovakia
              #4
              Re: DV6-3113ST No +vgacore power

              no EN signal=no power. EN come from PCH

                Comment

                • dj_ricoh
                  Badcaps Legend
                  • Jan 2013
                  • 2073
                  • uk
                  #5
                  Re: DV6-3113ST No +vgacore power

                  ATI Mobility Radeon HD 5650 Graphics

                  start from there !
                  Just cook it! It's already broken.

                    Comment

                    • ahmetozay
                      Senior Member
                      • Jul 2013
                      • 73
                      • turkey
                      #6
                      Re: DV6-3113ST No +vgacore power

                      Originally posted by dj_ricoh
                      ATI Mobility Radeon HD 5650 Graphics

                      start from there !
                      Is there something special that you know? If so would you kindly share with us please? Thanks

                        Comment

                        • dj_ricoh
                          Badcaps Legend
                          • Jan 2013
                          • 2073
                          • uk
                          #7
                          Re: DV6-3113ST No +vgacore power

                          my friend you need to start with a good reflow!

                          do you remember how was the thermal compound ? hard? did it had thermal sponge on video ?
                          Just cook it! It's already broken.

                            Comment

                            • Th3_uN1Qu3
                              Believe in
                              • Jul 2010
                              • 6031
                              • Romania
                              #8
                              Re: DV6-3113ST No +vgacore power

                              If it doesn't have +vgacore i doubt it's going to be the GPU. The VRM will work even if the GPU chip is removed from the board.
                              Originally posted by PeteS in CA
                              Remember that by the time consequences of a short-sighted decision are experienced, the idiot who made the bad decision may have already been promoted or moved on to a better job at another company.
                              A working TV? How boring!

                                Comment

                                • ibrahim_yas
                                  Banned
                                  • Nov 2015
                                  • 20
                                  • 86159159666
                                  #9
                                  Re: DV6-3113ST No +vgacore power

                                  thanks for sharing

                                    Comment

                                    • Attif
                                      Attif
                                      • Dec 2016
                                      • 49
                                      • pakistan
                                      #10
                                      Re: DV6-3113ST No +vgacore power

                                      thakssssssssssssssssssssssssSSS

                                        Comment

                                        • lebana
                                          Senior Member
                                          • Jan 2015
                                          • 81
                                          • sudy
                                          #11
                                          Re: DV6-3113ST No +vgacore power

                                          thank u

                                            Comment

                                            • sham20
                                              New Member
                                              • May 2018
                                              • 1
                                              • syria
                                              #12
                                              Re: DV6-3113ST No +vgacore power

                                              thanks

                                                Comment

                                                • victor_quiroga
                                                  Senior Member
                                                  • Dec 2014
                                                  • 61
                                                  • argentina
                                                  #13
                                                  Re: DV6-3113ST No +vgacore power

                                                  Gracias

                                                    Comment

                                                    • beal
                                                      Senior Member
                                                      • Jul 2017
                                                      • 95
                                                      • Iran
                                                      #14
                                                      Re: DV6-3113ST No +vgacore power

                                                      thanks

                                                        Comment

                                                        • sazli05
                                                          New Member
                                                          • Mar 2016
                                                          • 6
                                                          • tr
                                                          #15
                                                          Re: DV6-3113ST No +vgacore power

                                                          Originally posted by ahmetozay
                                                          Hello, this unit came as there was no picture on the screen. it takes 1A and stops there, also with debug card it shows DIMM as error. I replaced several rams but still shows DIMM error. Then i checked +vgacore and it was 0v.

                                                          19v comes to PU13 which is vgacore chip
                                                          5v comes to VDD and VDDP
                                                          0v comes to EN/DEM

                                                          Motherboard model is: DA0LX6MB6H1 Rev.H
                                                          Attach is the pdf schematic.

                                                          Any advices welcome. Thanks
                                                          Thank you come easy
                                                          Last edited by piernov; 12-03-2019, 12:41 PM. Reason: google translte

                                                            Comment

                                                            Previous template Next

                                                            Related Topics

                                                            Collapse
                                                            • Novgorod
                                                              Asus Strix Z270i Gaming dead DIMM troubleshoot
                                                              by Novgorod
                                                              Hi!

                                                              I have an Asus Z270i mini-ITX board with a dead DIMM slot (the one further from the CPU). The board POSTs with only the other DIMM populated but gets stuck with the DRAM error LED when the bad slot is populated. The test RAM and CPU are known working (confirmed in a different board, both memory channels are fine). The board was working for many years in a watercooled system and had a tiny bit of corrosion in different places (which came off without issues) and no visible component or trace damage.

                                                              What are the steps for DIMM (DDR4) socket troubleshooting? Since the...
                                                              07-13-2024, 02:35 PM
                                                            • eccerr0r
                                                              DDR3/DDR4 laptop SODIMM to desktop DIMM adapters
                                                              by eccerr0r
                                                              Anyone have/use these SODIMM to desktop DIMM adapters, well, not to convert signaling types but just change socket types. Are they stable? Do they slow things down and force downclocks?

                                                              I have an unused DDR3 4GB SODIMM and have a need for a 4GB DDR3 DIMM. Wondering if I should:
                                                              - buy a 4GB DIMM (and selling the 4GB SODIMM seems unlikely)
                                                              - get an adapter for the SODIMM?
                                                              - Find a cheap 8GB DIMM somewhere and hope it's not a SODIMM...

                                                              Though DDR3 is my highest technology module out there I suspect I really should be getting 8GB modules especially for a...
                                                              03-02-2022, 01:56 AM
                                                            • mcplslg123
                                                              HP 2000 Dimm Display
                                                              by mcplslg123
                                                              Model:HP2000 series
                                                              M/B:Newton_CR&HR_HPC MV_MB_V1

                                                              Problem is dimm display. I can see image when mobile flash light is used. Exact schematic is not available for this m/b and i've linked a reference scheme which is almost similar.

                                                              Measurement on lvds connector.

                                                              01. Pin29-30(+VBAT)-19V
                                                              02.Pin27(LVDS_PWM)-3.3V
                                                              03.Pin26(BL_Enable)-3.07V
                                                              04.Pin5(LVDS_DATA)-3.3V
                                                              05.Pin4(LVDS_CLK)-3.3V
                                                              06.Pin3-3.3V
                                                              07.Pin1-2(LCDVCC)-3.3V

                                                              Not sharing other pin measurements as i think they are not relevant as i can see a dimm...
                                                              HP Compaq Notebook 431 Schematic - Badcaps
                                                              https://www.badcaps.net
                                                              HP Compaq Notebook 431 Schematic 01015FY00-600-G
                                                              04-03-2025, 11:18 PM
                                                            • Chungalin
                                                              Repairing a DDR3 4GB DIMM with bad SPD EEPROM
                                                              by Chungalin
                                                              This is just for fun. Please don't tell me that a 4GB DDR3 is not worth this work.

                                                              I received a beeping PC that had a RAM issue: a single Kingston KVR1333D3N9/4G DIMM (part number 99U5471-012.A00LF). I noticed that the board beeped the same way either with this DIMM installed or without it. If I installed a second DIMM, the latter was detected, while the other one was like it didn't exist.

                                                              I replaced memory to fix customer problem, but I kept thinking about that faulty memory module. I considered that it could have a problem with SPD EEPROM and it simply was not detected...
                                                              07-20-2019, 07:37 PM
                                                            • bohaboha
                                                              Help Identifying a component and advices needed
                                                              by bohaboha
                                                              Advice on this: VPMS2GMB I found some but they don't have the same indications on the chipset
                                                              Does it have to be exactly the same or is it enough that it is a VPMS2GMB
                                                              Identification: this Ic Q80B-104HIP when I search with Q80B-104HIP I get results for :EN25Q80B-104HIP as you can see the first characters are not in the picture is :EN25Q80B-104HIP the right one ?
                                                              the last mentioned are from a samsung mainboard BN41-02751B-000
                                                              Now the last one ic from USB AMCAP DIGITAL MICROSCOPE is blown but you can almost see many signs but not all of them if you can assist with some identification...
                                                              02-20-2025, 03:43 PM
                                                            • Loading...
                                                            • No more items.
                                                            Working...