Announcement

Collapse
No announcement yet.

Usb voltage 5v to 0v

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Usb voltage 5v to 0v

    Hello everyone. I have a LA-4854p Acer mobo with broken usb ports. This mobo have only 2 usb ports and both broken. I pulled out old ports and soldered new ones. Board worked well. I checked new soldered usb pins. No short circuits and checked 5v voltage. But there is a problem. When i plug in an usb device, 5v drops to 0v.





    I checked pins of D23 , C538 , U28. They are all working properly. What should i do.

    #2
    Re: Usb voltage 5v to 0v

    check that you have not fitted the wrong usb ie usb1

    Comment


      #3
      Re: Usb voltage 5v to 0v

      Checked and desoldered both sockets but nothing changed. Still 5 to 0v.

      Comment


        #4
        Re: Usb voltage 5v to 0v

        I'm getting closer. When something plugged to usb, board cuts power. Something is making short circuit with usb but what? By the way i replaced U28 too.

        Comment


          #5
          Re: Usb voltage 5v to 0v

          Make sure you check the proper positioning of the port you just soldered.

          A few months ago I made a mistake of replacing the port. The port is almost identical until I noticed that the inside pins are inverted. Check the images I attached. hope this helps
          Attached Files
          Last edited by lezsimply; 02-01-2014, 08:51 AM.

          Comment


            #6
            Re: Usb voltage 5v to 0v

            Originally posted by lezsimply View Post
            Make sure you check the proper positioning of the port you just soldered.

            A few months ago I made a mistake of replacing the port. The port is almost identical until I noticed that the inside pins are inverted. Check the images I attached. hope this helps
            You know i just figured it. My ports are reversed ones. Thank you man.

            Comment


              #7
              Re: Usb voltage 5v to 0v

              No problem

              Comment


                #8
                Re: Usb voltage 5v to 0v

                Happened me once before, good u noticed quickly

                Comment


                  #9
                  Re: Usb voltage 5v to 0v

                  did tell him to check that he has not fitted usb 1 instead of usb 2 in the 1 post oh well

                  Comment


                    #10
                    Re: Usb voltage 5v to 0v

                    so it means lgf700b not fitted well usb1 and usb2? is that different

                    Comment


                      #11
                      Re: Usb voltage 5v to 0v

                      im also face with this problem i replace with the new one usb port. actually both i pull out from another acer machine. till now usb cant detect but 5v is present.

                      Comment


                        #12
                        Re: Usb voltage 5v to 0v

                        I fixed that board yesterday. I didnt have laptops bottom case so i didnt figured that ports reversed.

                        Comment


                          #13
                          Re: Usb voltage 5v to 0v

                          oh im understand reversed mean u soldered in wrong position right.

                          Comment


                            #14
                            Re: Usb voltage 5v to 0v

                            in some way yes, check post #5. same solder points but different pinouts.

                            Comment

                            Working...
                            X