VPCCA290X (MBX-239) No backlight in LED screen

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • orientalsniper
    Badcaps Veteran
    • Apr 2013
    • 459
    • USA

    #21
    Re: VPCCA290X (MBX-239) No backlight in LED screen

    mmmmm, I shined the screen with a flashlight behind the screen, I don't see anything, but I can see BIOS screen perfectly with VGA connection to external monitor. And I've tested about 10 screens already.

    Comment

    • trebo
      Badcaps Veteran
      • Feb 2010
      • 514
      • Wales, UK

      #22
      Re: VPCCA290X (MBX-239) No backlight in LED screen

      Originally posted by orientalsniper
      mmmmm, I shined the screen with a flashlight behind the screen, I don't see anything, but I can see BIOS screen perfectly with VGA connection to external monitor. And I've tested about 10 screens already.
      try shinning a bright torch into screen from front in a darkened room

      Comment

      • orientalsniper
        Badcaps Veteran
        • Apr 2013
        • 459
        • USA

        #23
        Re: VPCCA290X (MBX-239) No backlight in LED screen

        Just tried that in a completely dark room, I think I'd have to order the LVDS.

        Comment

        • dspok
          Badcaps Veteran
          • Jan 2014
          • 553
          • Nepal

          #24
          Re: VPCCA290X (MBX-239) No backlight in LED screen

          @orientalsniper
          if 19v is there then LED should lit up.
          it now looks like LED on the screen is dead, & i'm cofused that you said you have tested about 10 screens but problem is still there.

          Comment

          • dj_ricoh
            Badcaps Legend
            • Jan 2013
            • 2073
            • uk

            #25
            Re: VPCCA290X (MBX-239) No backlight in LED screen

            you never seen a cable or a mobo that destroys screen?
            pff join my club you will see weird crap all day
            Just cook it! It's already broken.

            Comment

            • scsblackdragon
              New Member
              • Dec 2013
              • 7
              • England

              #26
              Re: VPCCA290X (MBX-239) No backlight in LED screen

              did we establish that all the fuses are either short or open circuit?

              Comment

              • orientalsniper
                Badcaps Veteran
                • Apr 2013
                • 459
                • USA

                #27
                Re: VPCCA290X (MBX-239) No backlight in LED screen

                Yes, I'm sure it's not the screen, I took it to another friend's repair shop, combined we must had tested 15 different screens. I'm still waiting for the LVDS, I will report back with results.

                Comment

                • orientalsniper
                  Badcaps Veteran
                  • Apr 2013
                  • 459
                  • USA

                  #28
                  Re: VPCCA290X (MBX-239) No backlight in LED screen

                  I just tested with new cable, still nothing in screen, I'm not even sure if it's the backlight anymore since the screen receives the 19V.

                  Comment

                  • masud
                    Badcaps Veteran
                    • Jul 2011
                    • 317
                    • Bangladesh

                    #29
                    Re: VPCCA290X (MBX-239) No backlight in LED screen

                    if u change 100 leds, it will not work

                    Comment

                    • masud
                      Badcaps Veteran
                      • Jul 2011
                      • 317
                      • Bangladesh

                      #30
                      Re: VPCCA290X (MBX-239) No backlight in LED screen

                      if u change 100 ribbons, it will not work

                      Comment

                      • masud
                        Badcaps Veteran
                        • Jul 2011
                        • 317
                        • Bangladesh

                        #31
                        Re: VPCCA290X (MBX-239) No backlight in LED screen

                        it is problem in the motherboards i/o chip. change it , it will be ok.

                        Comment

                        • masud
                          Badcaps Veteran
                          • Jul 2011
                          • 317
                          • Bangladesh

                          #32
                          Re: VPCCA290X (MBX-239) No backlight in LED screen

                          the led light switching voltage comes from the io chip. though u have found the 19 voltage u are not getting the sw voltage and thats why the light is not getting on. check for 3v/5v at least in 2/3 pins beside 19 volt.

                          Comment

                          • masud
                            Badcaps Veteran
                            • Jul 2011
                            • 317
                            • Bangladesh

                            #33
                            Re: VPCCA290X (MBX-239) No backlight in LED screen

                            alternative way:

                            as per my pic,

                            u see pin #2 have no volt. if it so, then cut the pin #2 ribbon and short it with pin #3. hopefully it will work.
                            Attached Files

                            Comment

                            • orientalsniper
                              Badcaps Veteran
                              • Apr 2013
                              • 459
                              • USA

                              #34
                              Re: VPCCA290X (MBX-239) No backlight in LED screen

                              masud, thank you, you were right! The 3V and 5V were missing, but unfortunately I couldn't work with the laptop any longer. For any other who might have my problem, check the pins 35, 36, 38, 39 and 40 (3.3V or 5V, 19V). What you do is supply it from somewhere else in the cable or motherboard.

                              Check the pinouts from this datasheet: https://cdn.badcaps-static.com/pdfs/...e92d5f01f6.pdf
                              Last edited by orientalsniper; 02-02-2014, 10:48 AM.

                              Comment

                              • masud
                                Badcaps Veteran
                                • Jul 2011
                                • 317
                                • Bangladesh

                                #35
                                Re: VPCCA290X (MBX-239) No backlight in LED screen

                                just ensure both 35 and 36 pins are getting 3v/5v.

                                Comment

                                • masud
                                  Badcaps Veteran
                                  • Jul 2011
                                  • 317
                                  • Bangladesh

                                  #36
                                  Re: VPCCA290X (MBX-239) No backlight in LED screen

                                  ofcourse there should have 19 volt in 39 and 40 pins.

                                  Comment

                                  • ravi_1617
                                    YY Solutions
                                    • Jan 2012
                                    • 343
                                    • India

                                    #37
                                    Re: VPCCA290X (MBX-239) No backlight in LED screen

                                    I have same board same problem.
                                    external display ok. internal led display i can see just flash like and no image no light .
                                    19 volt present on screen side. no trace of signals on any pin on cro.

                                    Comment

                                    • kazia
                                      Senior Member
                                      • May 2015
                                      • 145
                                      • indonesia

                                      #38
                                      Re: VPCCA290X (MBX-239) No backlight in LED screen

                                      thanks...

                                      Comment

                                      • Laptop1703
                                        New Member
                                        • Dec 2016
                                        • 4
                                        • India

                                        #39
                                        Re: VPCCA290X (MBX-239) No backlight in LED screen

                                        input volt 19 missing what problem

                                        Comment

                                        • haopermana
                                          New Member
                                          • Jul 2021
                                          • 7
                                          • indonesia

                                          #40
                                          Originally posted by ravi_1617
                                          Re: VPCCA290X (MBX-239) No backlight in LED screen

                                          I have same board same problem.
                                          external display ok. internal led display i can see just flash like and no image no light .
                                          19 volt present on screen side. no trace of signals on any pin on cro.
                                          I'm facing same problem. Did u solved it?

                                          Comment

                                          Related Topics

                                          Collapse

                                          • HTR-Informatique
                                            Dell G3 15 3500 - Battery bug (black screen and flashing keyboard backlight)
                                            by HTR-Informatique
                                            Hello,

                                            YouTube video of the problem encountered: https://youtube.com/shorts/q7TLNv36LUo

                                            I am a pro and I have a problem that I have never seen despite my 7.5 years of experience on my own and my thousands of repairs, on a customer's Dell G3 15 3500.

                                            On this PC I have already changed the complete palmrest because the keyboard was no longer working properly.

                                            I also changed the screen because the PC fell and the screen was broken.

                                            I changed the battery with a new and original battery.

                                            I also had corrosion/oxidation on the...
                                            02-09-2025, 06:51 AM
                                          • turmix
                                            AOC U34G3XM, new monitor, black screen with backlight on, possible shortcircuit during dissassembly
                                            by turmix
                                            Hello, I'm working on a new deskmod pc project and have a problem with my monitor, an AOC U34G3XM, well, I may have bricked it.

                                            The monitor was dismanteled and the separate parts parts integrated in the desk. the screen panel alone is on the upper part, and main board/video board + power board on the back of the desk (not enough place on the cover to fit it)
                                            At first everything was working smoothly, then I decided to change the connexion between the video board and the screen for a longer one. Still working fine

                                            During another reassembly, I made a mistake, and...
                                            01-29-2024, 03:48 AM
                                          • FallenOne008
                                            Asus G712L No Screen Backlight
                                            by FallenOne008
                                            Hi everyone, hope all is well. I have run into a problem where my backlight screen is no longer working.

                                            The original screen was beginning to show signs of faultiness. I believe it was part of the inverter board that was going bad. The backlight for the screen was still functional at this point. Well one night as I was tinkering with the laptop, my idiot self forgot to disconnect the battery from the motherboard. I attempted to reconnect the EDP cable onto the motherboard, and as you might guess, I saw a nice spark from the cable and the port. Don't worry, I'm still kicking myself...
                                            03-31-2025, 08:27 PM
                                          • trepachka
                                            HP Probook 450 G8 Boardview+Schematics - screen backlight issue
                                            by trepachka
                                            I am just wondering if anyone has boardview+schematics for HP Probook 450 G8.

                                            Computer is missing screen backlight. The backlight fuse must be kaput. I know the fuse is located on the motherboard because we tried a different working screen and it, too is missing backlight.

                                            Perhaps, if the boardview+schematics are not available, someone can point out where the screen backlight fuse is located. Thanks.
                                            03-16-2024, 12:32 AM
                                          • RetroComputingGrotto
                                            LG 42LN540V LED Backlight Flickering After Replacement When Connecting The Screen
                                            by RetroComputingGrotto
                                            This TV has been on the wall in our reception area for around 10 years and the other day the backlight failed. You could see a feint picture so we knew the screen was OK. I took the TV apart to get to the failed backlight and inject voltage in to each half of the LED strips to identify which ones had failed and 4 needed replacing. I ordered a set off of Amazon and they arrived the next day.

                                            On fitting the new LED strips I plugged in the TV was blinded by the light!!




                                            It was only when I partially put it all back together (including the screen) that...
                                            10-23-2024, 04:17 AM
                                          • Loading...
                                          • No more items.
                                          Working...