Hello Guys,
i have some issues with my new latop which i bought from ebay as used.
Model: Clevo M77S 17"
-------------------------------
mainboard nr: nkm770su8k00209
6-71-m74so-XX-XX
Some Info:
Bios revision: 1.00.09NX
KBC/EC Firmware Revision: 1.00.05
I got a t3200 @ 2ghz
VGA Card: nVidia 9300M GS
VBIOS Revision: 62.98.2E.00.A1
VBIOS Build Date: 08/01/08
---------------------------------
Sometimes the laptop turns on and it runs into windows.
But sometimes it is not booting although I press 10 times the power on key.
What I did`?
I opened the Notebookcase and controlled the Fan-Voltage and Fan-speed .
The Fan do not turn on. I measured the voltage on the red and black pin when i push the power on keytop and leds lights up and dvd is searching...i can measure only 0,5Volts. I think the fan need 5Volts ?
Why do not starts the fan to run during the power post process? And when it runs into windows it does not start the fan also.
I checked the temperature during my observation whith opened notebookcases.
The cpu and gpu getting very hot, but i shuted the notebook down to not burn the cpu and gpu.
Is it possible that the guy flashes the wrong bios or this bios do not turn the fan on ?
Would be happy if you have some information for me to solve the problem?
might be that i reball the gpu? i am confused why the fan do not goes on during the power on phase ?
TIA
i have some issues with my new latop which i bought from ebay as used.
Model: Clevo M77S 17"
-------------------------------
mainboard nr: nkm770su8k00209
6-71-m74so-XX-XX
Some Info:
Bios revision: 1.00.09NX
KBC/EC Firmware Revision: 1.00.05
I got a t3200 @ 2ghz
VGA Card: nVidia 9300M GS
VBIOS Revision: 62.98.2E.00.A1
VBIOS Build Date: 08/01/08
---------------------------------
Sometimes the laptop turns on and it runs into windows.
But sometimes it is not booting although I press 10 times the power on key.
What I did`?
I opened the Notebookcase and controlled the Fan-Voltage and Fan-speed .
The Fan do not turn on. I measured the voltage on the red and black pin when i push the power on keytop and leds lights up and dvd is searching...i can measure only 0,5Volts. I think the fan need 5Volts ?
Why do not starts the fan to run during the power post process? And when it runs into windows it does not start the fan also.
I checked the temperature during my observation whith opened notebookcases.
The cpu and gpu getting very hot, but i shuted the notebook down to not burn the cpu and gpu.
Is it possible that the guy flashes the wrong bios or this bios do not turn the fan on ?
Would be happy if you have some information for me to solve the problem?
might be that i reball the gpu? i am confused why the fan do not goes on during the power on phase ?
TIA
Comment