Cvilux ribbon cable

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • alexanna
    Member
    • Mar 2010
    • 1346
    #1

    Cvilux ribbon cable

    I'm going to ask the question in this forum, I know I have just cross posted so go ahead and scold me, I'm a big guy and have very thick skin.
    What I'm hoping is someone that repairs lap tops may have an answer.
    The writing on this ribbon cable are”cvilLux E208903 AWM2076 105C 60V vw-1”
    Searching these numbers shows cables of several different widths and pin numbers.Im wondering if there is a source to buy this cable.
    Attached Files
    Whatever I do, I consider it a success, if in the end I am breathing, seeing, feeling and hearing!
    Tags: None
    • b700029
      Banned
      • Sep 2010
      • 640
      #2
      Re: Cvilux ribbon cable

      What you have is not a ribbon cable, but an FFC (flexible flat cable).

      The writing on it is usually just the manufacturer and approval notices. They make them in huge rolls, which they cut to size when you order one. You'll need to specify the number of connectors, the pitch, length, and the orientation of the ends.

        Comment

        • alexanna
          Member
          • Mar 2010
          • 1346
          #3
          Re: Cvilux ribbon cable

          Well identifying the number of pins will be easy. Is the pitch the width of the contacts and the spacing in-between them? Armed with the correct name, I've looked on EBay and did not notice anything close.
          Any idea on where to find distributors?
          Whatever I do, I consider it a success, if in the end I am breathing, seeing, feeling and hearing!

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Tr0ll
              T-con suspect issue. Both ribbon cables no picture. One ribbon cable ok. (58pus8545)
              by Tr0ll
              Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.

              The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.

              Original T-con:
              Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.

              First replacement T-con:

              I thought it might be t-con and ordered new t-con from china(supposedly tested)...
              10-07-2023, 07:48 PM
            • zesko
              xps 9520 ribbon cable
              by zesko
              Hello,
              I have a XPS 9520 with broken daughter board and missing ribbon cable. I can fix the board by replacing the connector, but I can't find the correct ribbon.

              There is 2 models, idk which one is needed on my laptop.

              0xkvng
              00vpr2

              Daughter board is LS H822P. When I check for a palmrest, the board attached to have a 0xkvng ribbon. But when I check for LS h822p, it's 00vpr2 ribbon...

              Someone can help me with that please ? Idk the difference between these 2 ribbon but they definitely doesn't look the same..

              thanks...
              10-23-2025, 05:03 PM
            • lowpost99@gmail.com
              Need a replacement ribbon cable DELL Latitude E5470
              by lowpost99@gmail.com
              Anyone know if the ribbon cables are standard across laptops cases like in a PC, or are they proprietary to each manufacturer? I damaged the one that runs between the MB and the power / HDD / Battery Status Indicator LED Circuit Board. The Dell SKU/DPN: ADM70LED. I just need help finding a replacement. Could I possibly use a similar cable from a donor laptop?

              ​
              09-04-2024, 07:42 PM
            • NWArkGuy
              Samsung UN65TU8000 - Panel Issue [ hole in ribbon cable ]
              by NWArkGuy
              Well, I will be the first to admit that I screwed up...

              In attempting to replace the backlight in a UN65TU8000, I made a hole through one of the ribbon cables between the board that runs along the bottom of the back of the TV and the panel. This lead to a between a 1/4 to 1/2 inch vertical stripe running the full height of the image.

              I don't have the experience; personally, to solder a bridging wire for the paths that were cut. So, I have been on the hunt for other Samsung TV's of similar size.

              I have 2 that I have found and have in my possession. ...
              10-12-2023, 10:13 PM
            • alfredomfr1
              HP M32f FDH Monitor: 12v missing after connect the LVDS ribbon cable to the LCD circuit
              by alfredomfr1
              12v pin is shorted to ground in the LCD board (1st picture) if the LVDS cable is disconnected, 12v are OK in the Main Board (2nd Picture)
              4 Photos
              06-04-2025, 10:23 AM
            • Loading...
            • No more items.
            Working...