Siemens Analog Module

Collapse
X
Collapse
+ More Options
Posts
 
  • Time
  • Show
Clear All
new posts
  • Per Hansson
    Super Moderator
    • Jul 2005
    • 5895
    • Sweden

    #1

    Siemens Analog Module

    It's a device which controls the precitec head distance on a laser machine, thing just stands there bouncing up and down, does not settle for the ca 1mm or so supposed distance...

    Might be cap related, but what are the blue caps in the back? I.e. what can I replace them with? They aren't OS-Con right?

    Attached Files
    "The one who says it cannot be done should never interrupt the one who is doing it."
  • gonzo0815
    Badcaps Legend
    • Feb 2006
    • 1600

    #2
    Re: Siemens Analog Module

    This are usuall low ESR Al-EL caps from BC components AKA Philips. I duno how low their ESR is, but i doubth that they are Ultra low esr. May be you will find some datasheet at their site.

    Comment

    • arneson
      Badcaps Legend
      • Sep 2005
      • 1267

      #3
      Re: Siemens Analog Module

      Does this control board use flash firmware?
      Jim

      Comment

      • Per Hansson
        Super Moderator
        • Jul 2005
        • 5895
        • Sweden

        #4
        Re: Siemens Analog Module

        No, I don't think it uses a firmware... A new one is on the way but might aswell try to fix this one too so we have a spare...

        Attached Files
        "The one who says it cannot be done should never interrupt the one who is doing it."

        Comment

        Related Topics

        Collapse

        • AlexVG
          Replacing the WiFi module on a vacuum cleaner iROBOT i7
          by AlexVG
          Hi,
          I have had an iROBOT i7 with a camera error (error 68) version REV M, year 2018.

          I bought a liquid damaged Mainboard with WiFi module, from the same vacuum cleaner, but a different year and a different version (REV G).
          (This board does not respond, only the LEDs light up in a circle.
          The liquid damage is catastrophic and restoration is impractical).
          (I bought this board to get the WiFi module and camera).

          The boards are completely different in the installation of elements, even the connector for the WiFi module is different.

          If...
          10-22-2024, 07:20 AM
        • repair-it
          TOSHIBA DLP 52HM95 How to reset timer module on bulb
          by repair-it
          I replaced the bulb only on my Toshiba DLP The bulb is a TB-25. This is the first time I've done a bulb only replacement. Supposedly there is a timer module that needs to be re-calibrated or reset. I don't know where the module is located. I see some vendors selling the bulb with the housing stating module included which leads me to think the module is located inside the enclosure the bulb mounts in, but I didn't see it. Maybe it's inside the plug attached to the bulb?

          Anyway - I am seeking information on how to reset this so called module so that the lamp will operate. Apparently...
          10-11-2023, 07:18 PM
        • m1ch43lzm
          70mai Dash Cam A510 - help identifying connector on camera module
          by m1ch43lzm
          Hi everyone
          I have a 70mai Dash Cam A510 which failed after about 3 months of being installed in my car, likely due to heat, i got it from aliexpress so no point in trying to return it for warranty (and shipping it back would cost me almost the same as a new one from ali)
          The camera would boot loop showing 70mai logo on the screen, sometimes it would boot fine then the live view would freeze or display purple lines

          I already took it apart, and found out that the camera boots fine if i unplug the camera module from the main PCB, sometimes "playing" with the connector...
          05-11-2025, 06:02 PM
        • sam_sam_sam
          Light that has a bug zapper in bottom section of light fixture the LED light module took a crap but the zapper still works
          by sam_sam_sam
          So I got the bright idea to remove the LED light module from the fixture and put it on top of another enclosure and keep using the zapper

          The removal of light module was a successful and now I just have to cut a hole in the enclosure and put a power cord that has an on and off switch on it

          You are lucky to get about two years of service out of one before the LED module starts flicking and just stops working because it is mounted on an aluminum plate and these are hard to solder on it and it is not worth messing around with them and especially this one because it has line...
          09-07-2024, 07:26 PM
        • r3vsEngIT
          ALPS Electric BT/WLAN Combo Module Experiment
          by r3vsEngIT
          i have a 2017 volvo that i upgraded the stereo in but the week link now is the SBC codec the head unit uses to transmit audio. i took the unit apart and we have a UGKZ2 combo module with a CSR8311 bt chip. after some research it is my understanding that ALPS made another combo module that used the CSR8350 chip. this chip is capable of aptx. https://vehicle-electronics.biz/cont...s-alps-modules

          my question is, would it be possible to swap out this UGX module as plug n play? what about replacing the CSR chip itself? any idea where to get either?

          ...
          03-06-2025, 11:11 AM
        • Loading...
        • No more items.
        Working...