Gigabyte G1 Assasain motherboard Bios IC model needed !
Bios ic fried and I cant read the model on top.
Thanks !
Bios ic fried and I cant read the model on top.
Thanks !
-
This job which came in is a Gigabyte B650M D3HP AX (rev. 1.0). It has BIOS version F1 currently, and the CPU installed is Ryzen 9 9900X, which according to the Gigaybte site, needs at least BIOS version F30. I don't have a supported CPU to install for the purpose of updating the BIOS. I have downloaded the BIOS from Gigabyte's website and unzipped the file "B650MD3HPAX.F32a". Can I just rename it to 'B650MD3HPAX.BIN' and flash it to the motherboard using neoprogrammer and my CH341A?...
-
Hi everyone,
I have an AORUS MASTER RX 6800 XT (non USB-C version), and my problem is that FUSION RGB is not working, it is not finding the GPU, and the RGB lights are off. There is a new firmware on the Gigabyte site which is supposed to fix this exact issue, but their Firmware upgrade does not work (I just get the highly unhelpful Erasing Flash Failed message when trying to update). I tried various internet-recommended software fixes to address this, but nothing helped, the factory Gigabyte EXE refuses to flash the BIOS.
My last resort would really be flashing the... -
Hello, newbie here. please be gentle :P
I have been lurking these forums for a while trying to figure out how to get into this motherboard's bios. Hopefully to repurpose it as a general workstation. Unfortunately my bios chip reader is still in the mail, but i have managed to get windows 7 running on it and was able to make a backup of the bios.
Strangely it shows in CPU-Z as a EMBM315B02.
From what i can tell its a rebranded Zotac H87ITX-A-E missing wifi pigtails, and missing usb 3.0 internal header. I was half tempted to just order on ebay the bios... -
Can anyone post a complete bios dump for a Gigabyte GA-MA74GM-S2 Rev 1.0 desktop motherboard please?
I have a dead motherboard - with no obvious signs of damage which I would like to save from scrap
Many thanks for any help -
This is a guide that I am writing for helping others to replace their MEC1503 EC chip if it breaks (or to get around an inconvenient prompt to the BIOS). This forum has been extremely helpful to me so I would like to contribute to help others. I will tell you right now that this task is very difficult to do. You MUST have experience and tools to do precision micro-soldering, BGA reballing, trace repair, and general laptop repair skills.
There are some specialty tools needed to do this task. The replacement MEC1503 chips can be acquired from Aliexpress. Do not buy the bare chips as...
Comment