cekcons
Member
Last Activity: Today, 04:42 AM
Joined: 03-10-2022
Location: istanbul
-
da0zj2mb8e0 rev e board view needed
Asus Vivobook i7 RTX da0zj2mb8e0 rev e board view needed... -
Dell G15 5510 Power on no screen. No cpu heat.
Dell G15 5510 Power on no screen. No cpu heat.
Motherboard number gdl55 la-k661p
I don't see any short on cpu power mosfets. If i inject 1v to cpu side draws 0.5 A.
When i plug the charger it starts atuomaticly and only gpu and hm heats up. (nothing too hot.)
Anything i am missing ? -
g634j-pmv-gbm boardview needed
g634j-pmv-gbm boardview needed
device asus rog g614-jz-n3039 -
dell la-m531p boardview needed
dell la-m531p boardview needed please
its dell g15 5530 -
[ATTACH=JSON]{"data-align":"none","data-size":"full","title":"WhatsApp G\u00f6rsel 2024-08-24 saat 10.35.28_c3cc17f8.jpg","data-attachmentid":3335526}[/ATTACH]...
-
No Power on GPU - Cpu heats up lights + fans - no display
I can not find the exact model of the board since its a rebrand of clevo.
If i am correct it has 6/7 gen i7 with gtx 950m
I already replaced uP1642P on it at gpu side that controls gate.
Gpu has two power mosfets. I take out both. Seems fine ( both 87350d)
Even both is outside still gate gets shorted to ground when power is on instead of 5v.
When i give 1.1v on gpu side it draws 0.6 A or so. Heats up slightly.
I am bout to lose my mind. Please help. -
GTX 1060 ZOTAC 6 GB MINI - Black Screen and Full Fan
1060 6gb zotac - boots fine but on random timings (underload or no load doesnt matter) gpu goes black screen and fan goes full mode. I already tried repasting and chaning thermal pads even cleaning pcb with ipa - Tried with diffrent pc etc. No dice. I flashed bios still same.
There seems to obvious damage. But I know this gpu sufferred cat pee before (you read it right) but i cleaned it.
Anything helps. Thanks. -
M2 Sata SSD failed - important data exist
hi everyone ! I do have a faulty ssd its m2 (sata i do belive). When i plug in to board and boot my pc it stucks on bios forever. I unplug it and it boots fine. I tried usb adapters etc still no dice.
But I found out that i can enable "ROM" mode (?) by shorting two debug pings at back of ssd. Now i can boot and it shows up as a 1gb drive on my device with "not started" mode. Name that it showed up is : SM59XT2A-80-10000001
My ssd brand is "TWINMOS" which is i do belive just a china rebrand. it is a 256 gb drive. only two storage chip on the thing. I... -
g1 assassin Rev 1 bios dump - main and backup needed
g1 assassin Rev 1 bios dump - main and backup needed
main and backup ic dead so i cant post corrupt bios cause its 01 all over.
thanks
-
Hello , i need [B]Lenovo la-b091p rev 2 Boardview . [/B]Reason i need is board had a short near cpu (pl801 two caps and one resistor cracked) . Cpu doesnt get any voltage when i give start to laptop. No heat or voltage on cpu.
I hope you can help me with boardview file. Thanks.Hello , i need [B]Lenovo la-b091p rev 2 Boardview . [/B]Reason i need is board had a short near cpu (pl801 two caps and one resistor cracked) . Cpu doesnt get any voltage when i give start to laptop. No heat or voltage on cpu.
I hope you can help me with boardview file. Thanks.Hello , i need [B]Lenovo la-b091pLeave a comment:
-
Asus TUF x299 Mark 1 Schematics / Boardview file
I have an x299 tuf mark 1 board.
Asus TUF x299 Mark 1 Schematics / Boardview file needed. -
Re: New Members - please post your introductions here
why hello there ! i am cekcons! i am new here. I am a bit young but want to learn repair computers ! I only work for 2 years now. But info and data is not enough here so i want to acsess data here as well ! Hopefuly i can help you and you can help me !
Leave a comment:
No activity results to display
Leave a comment: