Hi people, this board have the atx connector melted to the psu cable, because a psu issue. I divided the cable from the atx connector of the board and i find 5 bad caps.
2 x 3300uF 6,3v 105° (4 in total)
2 x 1000uF " " (10 in total)
1 x 1500uF " " (3 in total)
It have 11 x 100uF 10v 105° and 2 x 1200uF 6,3v 105°.
I plugged the board on a good psu and it works but very instable.
I must change ALL the caps on the board, or i can chage only the bads?
What's the best choice for this type caps?
thanx
2 x 3300uF 6,3v 105° (4 in total)
2 x 1000uF " " (10 in total)
1 x 1500uF " " (3 in total)
It have 11 x 100uF 10v 105° and 2 x 1200uF 6,3v 105°.
I plugged the board on a good psu and it works but very instable.
I must change ALL the caps on the board, or i can chage only the bads?
What's the best choice for this type caps?
thanx
Comment