ubiquiti nano station M5 XM firmware dump

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Pascal Komlassan
    Badcaps Veteran
    • Jan 2017
    • 809
    • TOGO

    #1

    ubiquiti nano station M5 XM firmware dump

    Hello everyone. please someone can help me remove the username and password in a router ubiquiti nano station M5
    Attached Files
  • SMDFlea
    Super Moderator
    • Jan 2018
    • 21186
    • UK

    #2
    Re: ubiquiti nano station M5 XM firmware dump

    Here https://www.ui.com/download/airmax-m/nanostationm/nsm5

    Ask in this part of the forum for network gear . https://www.badcaps.net/forum/forumdisplay.php?f=36
    All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

    Comment

    • Pascal Komlassan
      Badcaps Veteran
      • Jan 2017
      • 809
      • TOGO

      #3
      Re: ubiquiti nano station M5 XM firmware dump

      Originally posted by SMDFlea
      Yes thank you for your help. But I downloaded this on their site for flashed and it did not work. only it comes back with its old interface but I forgot the password

      Comment

      • ktmmotocross
        Boardkiller
        • Feb 2014
        • 3608
        • slovakia

        #4
        Re: ubiquiti nano station M5 XM firmware dump

        u did not see that hole with mark "RESET" on it with switch in it???

        power up and hold switch for 20seconds. if still not reseted password than hold switch, add power and still hold switch for 20 seconds

        Comment

        • Pascal Komlassan
          Badcaps Veteran
          • Jan 2017
          • 809
          • TOGO

          #5
          Re: ubiquiti nano station M5 XM firmware dump

          Originally posted by ktmmotocross
          u did not see that hole with mark "RESET" on it with switch in it???

          power up and hold switch for 20seconds. if still not reseted password than hold switch, add power and still hold switch for 20 seconds
          okay thank you very much my brother. it is done

          Comment

          • ktmmotocross
            Boardkiller
            • Feb 2014
            • 3608
            • slovakia

            #6
            Re: ubiquiti nano station M5 XM firmware dump

            this method works for allmost every network and wifi equipment

            Comment

            • the-sky-blue
              Member
              • Dec 2013
              • 48
              • salfeet

              #7
              Re: ubiquiti nano station M5 XM firmware dump

              try this
              Attached Files
              Last edited by the-sky-blue; 02-09-2023, 04:45 AM.

              Comment

              Related Topics

              Collapse

              • Ahari
                Request HP Proliant Microserver Gen 8 (J06) BIOS dump to restore system firmware
                by Ahari
                Hi all,

                This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.

                I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.

                I...
                08-13-2025, 06:12 AM
              • gurj1979
                Ubiquiti firmware help. US-8-150W POE
                by gurj1979
                Hi guys.

                I've got a Ubiquiti US-8-150W POE switch which has issues with updating the firmware.
                Turned out to be a bad EEPROM chip. It would read the firmware and work as normal, but failed to write new firmware to it.

                So I took off the chip and read on EEPROM and saved it. Wrote to old chip and failed to write
                Got New chip and writes good.

                THE PROBLEM...
                It fails to fully load the firmware, POE lights fail to work during g firmware test during load. I'm suspecting bad EEPROM Read.

                Does anyone have a Good Firmware I can have?...
                07-22-2024, 05:13 PM
              • Tamo Neko
                Request for MX25VB8035F (1MB) Firmware Dump – Asus TUF Gaming H670-Pro
                by Tamo Neko
                Hello everyone,

                I'm working on an Asus TUF Gaming H670-Pro motherboard and need help finding a firmware dump for the MX25VB8035F (1MB) SPI flash chip.

                What Happened:
                I mistakenly removed and erased this 1MB chip, thinking it was part of the main BIOS.
                • I later found that the board has two main BIOS chips (8MB + 16MB), which I have backups for.
                • My backup for the MX25VB8035F chip is just an empty 1MB segment filled with FFs, meaning I have no valid data to restore.
                What I Need:
                • A firmware dump for the MX25VB8035F chip from the same motherboard (or a compatible
                ...
                02-12-2025, 11:29 PM
              • Mephysis
                DUMP DVR HIKVISION DS-7208HGHI-K1 (80389 Rev 1.3 Firmware)
                by Mephysis
                Hello guys i really need help, i recently updated my DS-7208HGHI-K1 and it somehow got bricked, I've got it up and working now by flashing a new dump file i found but the serial number is really wrong and the uploader of the dump file probably intentionally did it.

                I still have the bricked dump file is it possible to transfer the serial number of the "bricked dump" to the "working dump"?
                03-27-2025, 02:34 AM
              • gun4as
                Need firmware dump for LG 23MP48HQ-P
                by gun4as
                Hello everyone, I have an LG 23MP48HQ-P with a mainboard EAX65543134. After a power flicker, the monitor only shows the "No Signal" message but goes to a black screen with a brief flash when an HDMI/VGA cable is plugged in. I cannot enter the OSD menu. All main voltages (18V, 5V, 3.3V) are stable under load. I made a backup of the firmware, but it was *after* the fault occurred, so my backup is likely corrupted. I flashed it back with no change in behavior. I can only find the firmware for the 24M38H model online. Could someone please share a working firmware dump for the 23MP48HQ-P?...
                08-25-2025, 04:28 AM
              • Loading...
              • No more items.
              Working...