Re: ubiquiti nano station M5 XM firmware dump
try this...
the-sky-blue
Member
Last Activity: 04-18-2024, 06:08 AM
Joined: 12-09-2013
Location: ps
-
Re: Dell Latitude E7270 bios
can any one unlock my dump
please how i can unlock by winhex...Leave a comment:
-
Re: Asus X553M schematic needed
ThanksLeave a comment:
-
Re: Hp 15-r015dx strange fault
chick if it clean >>
then use the hater gun at 260c on (Intel chip) 4 seconds then Wat to be collLeave a comment:
-
Re: lenovo ideapad 100
you can try this...Leave a comment:
-
Re: Dell alienware 14 la-9201p bios needed
if you programed a new bios file and password still >>> may be you need to program kbcLeave a comment:
-
Re: Dell alienware 14 la-9201p bios needed
read old bios and ec then upload those files to meLeave a comment:
-
Re: Dell alienware 14 la-9201p bios needed
you must extract it then edit it as old bios dumpLeave a comment:
-
Re: Dell alienware 14 la-9201p bios needed
oky you can search at ic 1 and 2 in pic...Leave a comment:
-
Re: Dell alienware 14 la-9201p bios needed
if you wanna to remove your password you must dissembling you laptop then pull up ec and bios then make a dump by using bios programmer then program a new oneLeave a comment:
-
Re: Dell alienware 14 la-9201p bios needed
are you have bios programmer ?Leave a comment:
-
Re: hp 2000 shut off within 30 min.
just clean cpu fan and change thermal pads ...
last think maybe you need to update bios .Leave a comment:
-
Re: Dell alienware 14 la-9201p bios needed
can you make a dump ?Leave a comment:
-
Re: dabu1mb16e0 rev e need schematics
look at this attachment...Leave a comment:
-
Re: c660
can you chick 3.3 v on kbc ?Leave a comment:
-
Re: short on RAM coil
that is mean your ic RT8207 may be not connected correctly or it is damaged ..
when you connect adapter AON7408L that is normal damagedLast edited by the-sky-blue; 03-07-2016, 04:06 AM.Leave a comment:
-
Re: Elitebook 8460P stuck in boot loop
you can chick on power button if you have a 3.3v you must program bios dumpLeave a comment:
-
Re: Dell Inspiron 1440 5V not present
that is problem mean you have some pins is not connected correctly .
you need to use flux and solder all pins ... i hope it will workLeave a comment:
No activity results to display
Leave a comment: