dell 172fpt 23v but no 5v

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • PlainBill
    Badcaps Legend
    • Feb 2009
    • 7034
    • USA

    #21
    Re: dell 172fpt 23v but no 5v

    Originally posted by alexanna
    I have done a bunch of resoldering.But I am unable to open any atatchments to see your suspect ones.May be tommrow?
    Thank you Al.
    I'm not having any problems opening the attachment to post #17. Are you?

    PlainBill
    For a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.

    Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.

    Comment

    • alexanna
      Member
      • Mar 2010
      • 1346

      #22
      Re: dell 172fpt 23v but no 5v

      Wow Its there now. There was also some one else that was having trouble opening attachments it must be fixed.
      Al.
      Whatever I do, I consider it a success, if in the end I am breathing, seeing, feeling and hearing!

      Comment

      • kc8adu
        Super Moderator
        • Nov 2003
        • 8832
        • U.S.A!

        #23
        Re: dell 172fpt 23v but no 5v

        i find it hard to believe that the 23v line is not only there but in regulation with the 5 gone.the +5 is where feedback comes from.and your lightbulbs cold resistance is likely to trip the ocp.are you sure you are testing at the correct point?

        Comment

        • alexanna
          Member
          • Mar 2010
          • 1346

          #24
          Re: dell 172fpt 23v but no 5v

          Originally posted by kc8adu
          i find it hard to believe that the 23v line is not only there but in regulation with the 5 gone.the +5 is where feedback comes from.and your lightbulbs cold resistance is likely to trip the ocp.are you sure you are testing at the correct point?
          Well I think so.
          My ground lead is hooked up to the heat sink of the of the two schottky diodes ,D820 and D813
          I measure continuity from the heat sink to the negative side of the capacitors for the 5v, and the 12v or 23v capacitors whatever it is suppose to be? The positive lead is hooked up to the center leg,O r # 2 leg. Of the diode.
          I might be making a little bit of progress here .I have done some resoldering as PlainBill suggested. I have removed the thru hole components around the surge diode and resolderd them, Including the smps coil.
          At this time my 5v has come back,The power Led is coming on,But after a very short time it starts to flash and I am noticing A squealing noise around the octocoupler.I haven't done it very long but the back lamps of my test panel will flash at the same rate as the power green led and the squealing noise.I still measure 23v on the center leg of D820 #yg902c2 diode.
          I don't know if this got hit by lighting or there was a hell of a power surge,And its only a 17” monitor so how much time and money dose one invest? But I am not one to give up on things
          I am unsure if any of the things I have mentioned will be of any help But at this moment this what's happing
          Al.
          Whatever I do, I consider it a success, if in the end I am breathing, seeing, feeling and hearing!

          Comment

          • el3ctroded
            Senior Member
            • Nov 2008
            • 198
            • USA

            #25
            Re: dell 172fpt 23v but no 5v

            The other diode next to d815... I'd replace it as well just cause it's cheap to do and in the same circuit.
            And the transistor on the AL heatsink... test it carefully. I'd think it and/or the transformer T802 would be damaged. It may not be totally fried, just failing. Or it could be the pwm controller. If you have a scope, check the signal on the gate of the afore-mentioned transistor.

            Comment

            • alexanna
              Member
              • Mar 2010
              • 1346

              #26
              Re: dell 172fpt 23v but no 5v

              No to scope.But I should have enough spare good parts around here to try the other diode.I am just trying to keep the replacements to a minimum. the more i do the more of a chance I have of realy screwing some thing up.
              Thanks Al.
              Whatever I do, I consider it a success, if in the end I am breathing, seeing, feeling and hearing!

              Comment

              • alexanna
                Member
                • Mar 2010
                • 1346

                #27
                Re: dell 172fpt 23v but no 5v

                Huston we no longer have a problem!!!!
                I went ahead and replaced the thru hole diodes in the question area. no more blinking and or squealing and the test panel back lamps are working I have not hooked up lcd panel yet but at least I've got back lamps. I am reading a good steady 5v on one of the schottys. I am still reading around 23v on the other. I am going to let this run a little longer on the bench before I completely reassemble.
                Thank you so much PlainBill and
                kc8adu and el3ctroded.
                Al.
                Whatever I do, I consider it a success, if in the end I am breathing, seeing, feeling and hearing!

                Comment

                • PlainBill
                  Badcaps Legend
                  • Feb 2009
                  • 7034
                  • USA

                  #28
                  Re: dell 172fpt 23v but no 5v

                  Originally posted by alexanna
                  Huston we no longer have a problem!!!!
                  I went ahead and replaced the thru hole diodes in the question area. no more blinking and or squealing and the test panel back lamps are working I have not hooked up lcd panel yet but at least I've got back lamps. I am reading a good steady 5v on one of the schottys. I am still reading around 23v on the other. I am going to let this run a little longer on the bench before I completely reassemble.
                  Thank you so much PlainBill and
                  kc8adu and el3ctroded.
                  Al.
                  Thank me? I was spending the day in the pool!!! Glad to hear it's working.

                  PlainBill
                  For a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.

                  Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.

                  Comment

                  • mips
                    Member
                    • Jan 2012
                    • 20

                    #29
                    Re: dell 172fpt 23v but no 5v

                    Originally posted by PlainBill
                    I've been unable to locate a datasheet for the SMPS controller. Have you been able to find one?
                    Thanks to budm from https://www.badcaps.net/forum/showth...d=1#post213631

                    http://www.alldatasheet.com/view.jsp?Searchword=TEA1552
                    http://www.alldatasheet.com/datashee...S/TEA1552.html
                    http://www.alldatasheet.com/datashee.../TEA1552T.html

                    Comment

                    Related Topics

                    Collapse

                    • Bowline
                      Dell E6400 PT434 type Battery Charging Stuck at 1%. Battery Pinouts?
                      by Bowline
                      My question pertains to understanding the control circuity inside a Dell PT434 type battery used in Dell E6400, E6410 and other Dell notebooks?

                      Does anyone have a circuit diagram for the inside of a Dell PT434 battery and/or a description of how the control lines work to control this battery?

                      My reason for asking is I have a battery which I cannot get to charge beyond 1% in a Dell E6410 or E6400.
                      The LED bar graph charge indicator on the battery shows one LED lighted when the info button is pressed.
                      I have tried multiple different Dell power adapters. My Dell...
                      06-11-2025, 10:13 AM
                    • F R 2568
                      Dell Latitude 5420 does not start (no post) need help to find the reason why
                      by F R 2568
                      Hello all,

                      this is my first post, so if I make mistakes please do not hesitate to point them out, thank you in advance.

                      I got a Dell Latitude 5420 (Service Tag: 7RFM6D3, Motherboard: GDF40 LA-491P Rev.: 2.0 (A01)) which does not start and I want to repair it. These are the symptoms:

                      If the laptop is only connected to the AC adapter (battery removed):

                      When I press the power button, the keyboard backlight and the display backlight are turning on. Caps key light is lightning, but key does not respond to pressing it.

                      The power/battery...
                      01-08-2025, 05:45 AM
                    • diamon
                      Looking for Dell Latitude 5520 / 5530 / 5540 RJ45 network connector replacement
                      by diamon
                      I have a Dell Latitude 5530 with a damaged RJ45 network connector. See the attached pictures.

                      Have already searched on Farnell / Aliexpress / Ebay and had contact with several suppliers on Aliexpress and Ebay, but they cannot deliver this connector.
                      Is there someone inside the EU, who has these connector(s) or perhaps defective motherboard(s) for these laptop models I have mentioned in the topic title.

                      Pictures of these boards:
                      Dell Latitude 5520 https://www.ebay.com/itm/256052956663
                      Dell Latitude 5530 https://www.ebay.com/itm/125844181534
                      Dell...
                      02-28-2024, 12:51 PM
                    • OntarioTL
                      Dell 5410 greyed out BT
                      by OntarioTL
                      Well I've learned something new today. Of all the Dell laptops I've come across I have never seen bluetooth greyed out, and only to learn this is during the build from Dell factory. I've tried to pull the original BIOS and fix with another dell with the same issue on the forums, however the original was not recovered from the forum upgrade so I cannot do a comparison to attempt the fix on my own.

                      If someone could help me out with this unit and I'll try the next one as so far I have 2 on my desk with this issue. Thanks in advance!

                      Dell Lattitude 5410
                      Service Tag...
                      Today, 01:28 PM
                    • lalle-
                      Dell G5 SE 5505 - "Invalid memory installed" after BIOS update.
                      by lalle-
                      Hello!

                      I have a problem with a Dell G5 SE 5505 laptop that I hope someone can give me a few pointers on.
                      [OK, it's not really a laptop, I'm running the motherboard on my desktop with only cooling, RAM and an M2 drive attached.]
                      I had some performance issues, so I decided to update my BIOS from 1.7.0 to the latest version, 1.20.0.
                      The computer restarted and the update dit not want to continue without a battery connected, even though I used dell's method of bypassing this requirement.
                      I tried updating to a custom BIOS from Reddit user Satori_Nori https://www...
                      08-11-2024, 02:01 PM
                    • Loading...
                    • No more items.
                    Working...