[Syncmaster 245B Plus] Problems with power board BN44-00195A

[FredFloete]

Re: [Syncmaster 245B Plus] Problems with power board BN44-00195A

As explained and as you can see the marking I made on the board, you still have shorted circuit on the board since the the Cm802 shows OL. You need to check those Two MOSFETs by checking the resistance between S and D pin for low resistance.
Btw, leave out the resistor for now when checking the MOSFETs.

So I can leave the MOSFETs in board for the measurment?