nice clear permanent image
Attached Files
-
-
Re: mother of all burn in!
doing that reflectoporn again? -
Re: mother of all burn in!
ROFLOL! no reflectoporn here!
just be glad its a poor reflection!
your crt/lcd would crack otherwise!Comment
-
Re: mother of all burn in!
You should see arcade machines they get nasty burn in like that too.
High scores burn in is a real common occurrence
.
Last edited by Krankshaft; 05-21-2008, 11:30 PM.Elements of the past and the future combining to make something not quite as good as either.Comment
-
Re: mother of all burn in!
Was the second pic a new tube?Comment
-
Re: mother of all burn in!
yes.
the old one was so dim the mill operator taped a box around it to see it at all!
it was arcing down the neck and shutting down.old tube was gassy.Comment
-
Re: mother of all burn in!
Thank god you were wearing a beer shirt.
Find Nedry!
Check the Vending machines!!
<----Computer says I need more beer.Comment
-
Re: mother of all burn in!
I can tell you that the "mother of all burn in " is pentium's avatar icon. I think that is probably the funniest avatar that I have ever seen.Comment
-
Greetings everyone,
I have a HANNSG Hi221 monitor that exhibits two seconds to black issues (backlight goes off, display is still on as confirmed by shining a flashlight on it) with some additional oddities...
The monitor failed on me with a standard "2 seconds to black" some time ago prompting me to initially replace most of the electrolytic capacitors (some of them were bulging/leaking).
Things kinda sorta worked for a night, then the problem returned along with some flickering and "buzzing" noises.
Upon closer inspection... -
Hi,
we're getting quite a lot wiped A1932 & A2337 from scrap with MDM (Remote management), we'd like to find permanent solution to remove it without CPU swap as it gets not economical, I found iremove.tools website which offer permanent solution, however if they got shut-down i believe laptops would also get locked? Does anyone have any knowledge about this service & about any other possible method? -
Eventually discovered a burn mark near lower corner of LCD. Here is a summary- Backlight on, no image
- Disconnect right buffer board (view from front), left side display comes on
- Masked off pin 7+8 (both ~12,5v on both left and right buffer board) from t-con to right buffer board (view from front) display works but have some lines
- Buffer board is pretty simple
07-11-2025, 04:04 PM -
Hello. Have this Dell G15 5511 la-k455p that new gpu fan burn and left pwm sig from sio with 10 ohms.
I read that this sio MEC1515 must be programmed, but someone says dont. My Vertyanov seems dont have this model in it.
Laptop works and can be tricked by split pwm, but i dont want to do this stuff this way.
So anyone really knows if it must be programmed?09-16-2025, 07:11 AM -
Hello all!
Westinghouse TV WD48FAB100 Not Powering On – Burn Mark Found on Power Supply .
I have a Westinghouse LED TV, model WD48FAB100 that is not powering on. Upon removing the back cover, I noticed a burn mark where the AC cord connects to the power supply/main board. In this model, there is only one board combining the two functions. Previous owner said the TV experienced a lightening strike, but who knows. I checked the main fuse, tested OK. Here are a collection of readings from the power supply ports. Looking for some guidance on what to test/check next....
Comment