I have a 22" AOC 22LVWk monitor that would turn on, green LED, then right as the backlight would turn on it would shut down and repeat the cycle. Unplugging any one of the 4 CCFL lamps would allow it to stay on.
It had some Hermei caps in it (which by the way have the same vent stamp as Panasonic, shame on them!) and none of them were bulged or venting, but I recapped it anyway with Panasonics and Nichicons. It still has the same issue. On a whim I yanked the large cap (Elite) and stuck a Capxon cap I had in there (just for testing purposes). Still the same issue. Turns on, blinks off, repeat. Unplug any one CCFL and it stays on, so I can't blame it on a bad lamp.
The Nichicon caps I put in there are only VR series, could that be the issue? It was what I had on hand and I thought at least for testing purposes they would work short-term. Maybe not? Panasonics are FM.
Pics are attached.
It had some Hermei caps in it (which by the way have the same vent stamp as Panasonic, shame on them!) and none of them were bulged or venting, but I recapped it anyway with Panasonics and Nichicons. It still has the same issue. On a whim I yanked the large cap (Elite) and stuck a Capxon cap I had in there (just for testing purposes). Still the same issue. Turns on, blinks off, repeat. Unplug any one CCFL and it stays on, so I can't blame it on a bad lamp.
The Nichicon caps I put in there are only VR series, could that be the issue? It was what I had on hand and I thought at least for testing purposes they would work short-term. Maybe not? Panasonics are FM.
Pics are attached.
Comment