Got this monitor today, just seeing if I can revive it.
Have attached photos of the powerboard, both sides.
There are 2 connections off it going to the videoboard and to the display buttons board. The expected voltages there are +5V, but I'm getting only a couple of mV.
Working through the powerboard from the mains-in, I'm typically seeing +/-100-150V all the way to the right-hand side of T1. On the left-hand side of T1, just a couple of mV.
Is this transformer likely to be the culprit, or do I need to check anything else?
Have attached photos of the powerboard, both sides.
There are 2 connections off it going to the videoboard and to the display buttons board. The expected voltages there are +5V, but I'm getting only a couple of mV.
Working through the powerboard from the mains-in, I'm typically seeing +/-100-150V all the way to the right-hand side of T1. On the left-hand side of T1, just a couple of mV.
Is this transformer likely to be the culprit, or do I need to check anything else?
Comment