Re: Neovo F-419 no power.
Is their any one that can help me trouble shoot my Neovo F419 monitor?
Is their any one that can help me trouble shoot my Neovo F419 monitor?
-
-
Re: Neovo F-419 no power.
Oops missed a page of the thread
*** EDITED ***Last edited by newtothis; 04-12-2015, 02:38 PM.Comment
-
Re: Neovo F-419 no power.
I have been checking for fuses but cant see any small ones on the back of the board.
If budm does not come back on I will have a look back at the whole thread tomorrow.
Not sure what you mean about the board layout being different - perhaps small differences? the board number and revision are the same as the OP?
he has posted a schematic in post 1? is it not relevant?
LATER - I see now you mean a different Main boardLast edited by selldoor; 04-12-2015, 03:25 PM.Please upload pictures using attachment function when ask for help on the repair
http://www.badcaps.net/forum/showthread.php?t=39740Comment
-
Re: Neovo F-419 no power.
can you do the tests mentioned in this post
https://www.badcaps.net/forum/showpo...2&postcount=21Please upload pictures using attachment function when ask for help on the repair
http://www.badcaps.net/forum/showthread.php?t=39740Comment
-
Re: Neovo F-419 no power.
All components measure ok. However I measure 6.61 volts across C809 with power to the board and the logic board not connected.Comment
-
Re: Neovo F-419 no power.
OK, lets remove the jumper that feeds the B+ to the inverter circuit to see if the power supply will start up OK without inverter circuit in place.Attached FilesNever stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
-
Re: Neovo F-419 no power.
Ok where do I put my meter for this test? I also assume that the logic board is still disconnected.Comment
-
Re: Neovo F-419 no power.
Did you remove the jumper to isolate the inverter circuit from power supply?Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: Neovo F-419 no power.
Ok sorry it took so long to get back to you. Yes the jumper is removed. Now what, nothing happens.Comment
-
Re: Neovo F-419 no power.
OK, hook the logic board to the power supply board and see if you can see the LED power lights when you activate the power switch.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: Neovo F-419 no power.
Ok everything hooked back up and the power light does not come on when I press power on.Comment
-
Re: Neovo F-419 no power.
Budm are you still their??Comment
-
Re: Neovo F-419 no power.
Can you do the tests on U801 in this post
https://www.badcaps.net/forum/showpo...0&postcount=42
NO POWER TO THE BOARDPlease upload pictures using attachment function when ask for help on the repair
http://www.badcaps.net/forum/showthread.php?t=39740Comment
-
Re: Neovo F-419 no power.
-V to U801 pin 1 = .22 ohm
-V to U801 pin 3 = 1.52 Meg ohm
-V to U801 pin 6 = .62 ohm
R821 to u801 pin 3 = .22 ohmComment
-
Re: Neovo F-419 no power.
And the voltages
https://www.badcaps.net/forum/showpo...9&postcount=44
Dont be fooled by the results he got - start high and work down.Please upload pictures using attachment function when ask for help on the repair
http://www.badcaps.net/forum/showthread.php?t=39740Comment
-
Re: Neovo F-419 no power.
-V To U801 pin 1 = 0 volts
-V to U801 pin 3 = 9.033 volts
-V to U801 pin 6 = 0 voltsComment
-
Re: Neovo F-419 no power.
What is the part number on U801Please upload pictures using attachment function when ask for help on the repair
http://www.badcaps.net/forum/showthread.php?t=39740Comment
-
Re: Neovo F-419 no power.
I do not see a part number on U801Comment
-
Re: Neovo F-419 no power.
Now what?Comment
-
Re: Neovo F-419 no power.
Does anyone have a parts list or schematicComment
-
Hi, Im having a similar problem with my Acer Nitro 5 AN517 52, took it to repair and they said that the problem was a burned mosfet wich has written on top "I6 GUE 8v1507".
There is written PQB12 on the motherboard right next to it.
Does anyone know if there is soemthing similar I can buy to replace it with?
Seems impossible to find theidentical mosfet online. -
Hello folks
Laptop Asus R520U problem with instaling ssd drive, laptop come with 2.5" hdd drive, but there is slot for ssd (M.2 I think) I put SAMSUNG 500GB SSD 980 Pro M.2 PCI-E NVMe, but can't be recognized in bios or windows
I don't have any other type of ssd to try, maybe the bus is sata3 not pci-e ??
Any info ?? tnx...08-13-2021, 03:07 AM -
I was trying to repair my tv wich previously had a blinking red led 2 times and it kept going. After shorting the sdm the blinking led changed 5 slow blinks and 3 fast ones wich in the service manual meant error 53 / the fusion chip.
After I heated the fusion chip with a hairdryer for 5 minutes it started working perfectly but after a day it stopped this time no led blinks even in sdm mode.
After probing the psu I have 3.49v and for 1 second I have at least 2 12.3v lines active the fusion chip gets warm in that second the led turns on and then the 12v lines start losing power... -
I need bios for toshiba satellite pro r50-b-15j motherboard faebsy2
i have tried this :
but no power
and i tried this
the laptop worked but asked for a password
i have tried many with same motherboard name wich is FAEBSY2 A5A003954010 A but the laptop didnt turn on (no lights, no fan spinning)
i have attached my original bios wich has been corrupted after a windows update (turn on but black screen)
if any have the bios for the exact model name will be great "toshiba satellite pro r50-b-15j"... -
Hello Folks,
i have a HP Elitebook 840 G1 with a locked BIOS and i have bought a CH341a (black PCB). My problem is that the Bios Chip reads 25Q128A 13ECO and i cannot find a profile for this chip in any of the software recommended in the guide threat in this forum. The chip cannot be detected wich i dont find too surprising, but i can read the chip with random other profiles selected.
I have found a post in this forum in wich the user stated he was able to flash this exact chip with the CH341a and the testclip, but unfortunately this user is no longer active. In...
Comment