burned mosfet wich has written on top "I6 GUE 8v1507"

[Caly411]

Hi, Im having a similar problem with my Acer Nitro 5 AN517 52, took it to repair and they said that the problem was a burned mosfet wich has written on top "I6 GUE 8v1507".
There is written PQB12 on the motherboard right next to it.
Does anyone know if there is soemthing similar I can buy to replace it with?
Seems impossible to find theidentical mosfet online.

[SMDFlea]

Re: burned mosfet wich has written on top "I6 GUE 8v1507"

PE636BA https://www.google.com/search?q=PE636BA

.

[azazero]

Hi, Im having a similar problem with my Acer Nitro 5 AN517 52, took it to repair and they said that the problem was a burned mosfet wich has written on top "I6 GUE 8v1507".
There is written PQB12 on the motherboard right next to it.
Does anyone know if there is soemthing similar I can buy to replace it with?
Seems impossible to find theidentical mosfet online.

i need this too anyone what part model can be replaced the old one

[mon2]

See attached for the datasheet for this mosfet. This is a very common mosfet used on many motherboards. Would you have a donor board? If yes, review the mosfets that are available to you.

Post their topside markings for a quick review.

In short:

1) need a mosfet with the same size = 5 x 6 mm PCB footprint
2) N-channel
3) As high current support as possible. It should be at least the same as the original but higher is even better.
4) 30V Source drain voltage support

EMB09N03HR.PDF

[azazero]

thanks for the advice well appreciated . i will look for my scrap board here .thank you sir