Pascal S-Pro2 amplifier module

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Thabto
    Member
    • Oct 2009
    • 32
    #1

    Pascal S-Pro2 amplifier module

    Hi

    I was using this module in a Professional Audio Subwoofer. One day it blew and certain small components were burnt such that they cannot be identified by their part numbers. I am a certified Electronics Technician and would like to have the chance to repair my module, if you have a part list for this module, that would be great. I need to know the values of the following components:

    TRANSISTORS
    T503, T506, T509, T511

    DIODES
    D502, D504, D506, D508, D520, D522

    IC'S
    IC501, IC505

    RESISTORS
    R500, R507, R511, R520, R527, R576*, R573*

    CAPACITORS
    C138, C205, C229
    Thank you for reading. Let me know. TIA
    Tags: None
    • CapLeaker
      Leaking Member
      • Dec 2014
      • 8340
      • Canada
      #2
      Re: Pascal S-Pro2 amplifier module

      I found this thread. Hopefully it helps you out a bit. https://forum.speakerplans.com/jbl-p...pic101326.html

        Comment

        • Thabto
          Member
          • Oct 2009
          • 32
          #3
          Re: Pascal S-Pro2 amplifier module

          Originally posted by CapLeaker
          I found this thread. Hopefully it helps you out a bit. https://forum.speakerplans.com/jbl-p...pic101326.html
          Many thanks for that. I now only require ID of these:

          TRANSISTORS
          T503, T506, T509

          DIODES
          D502, D504, D506, D508, D520

          IC'S
          IC501

          RESISTORS
          R500, R511, R520, R527, R576*, R573*

          CAPACITORS
          C138, C205, C229

            Comment

            Previous template Next

            Related Topics

            Collapse
            • AlexVG
              Replacing the WiFi module on a vacuum cleaner iROBOT i7
              by AlexVG
              Hi,
              I have had an iROBOT i7 with a camera error (error 68) version REV M, year 2018.

              I bought a liquid damaged Mainboard with WiFi module, from the same vacuum cleaner, but a different year and a different version (REV G).
              (This board does not respond, only the LEDs light up in a circle.
              The liquid damage is catastrophic and restoration is impractical).
              (I bought this board to get the WiFi module and camera).

              The boards are completely different in the installation of elements, even the connector for the WiFi module is different.

              If...
              10-22-2024, 07:20 AM
            • repair-it
              TOSHIBA DLP 52HM95 How to reset timer module on bulb
              by repair-it
              I replaced the bulb only on my Toshiba DLP The bulb is a TB-25. This is the first time I've done a bulb only replacement. Supposedly there is a timer module that needs to be re-calibrated or reset. I don't know where the module is located. I see some vendors selling the bulb with the housing stating module included which leads me to think the module is located inside the enclosure the bulb mounts in, but I didn't see it. Maybe it's inside the plug attached to the bulb?

              Anyway - I am seeking information on how to reset this so called module so that the lamp will operate. Apparently...
              10-11-2023, 07:18 PM
            • m1ch43lzm
              70mai Dash Cam A510 - help identifying connector on camera module
              by m1ch43lzm
              Hi everyone
              I have a 70mai Dash Cam A510 which failed after about 3 months of being installed in my car, likely due to heat, i got it from aliexpress so no point in trying to return it for warranty (and shipping it back would cost me almost the same as a new one from ali)
              The camera would boot loop showing 70mai logo on the screen, sometimes it would boot fine then the live view would freeze or display purple lines

              I already took it apart, and found out that the camera boots fine if i unplug the camera module from the main PCB, sometimes "playing" with the connector...
              05-11-2025, 06:02 PM
            • sam_sam_sam
              Light that has a bug zapper in bottom section of light fixture the LED light module took a crap but the zapper still works
              by sam_sam_sam
              So I got the bright idea to remove the LED light module from the fixture and put it on top of another enclosure and keep using the zapper

              The removal of light module was a successful and now I just have to cut a hole in the enclosure and put a power cord that has an on and off switch on it

              You are lucky to get about two years of service out of one before the LED module starts flicking and just stops working because it is mounted on an aluminum plate and these are hard to solder on it and it is not worth messing around with them and especially this one because it has line...
              09-07-2024, 07:26 PM
            • DriversScrew
              Omnitronic TUNA-NET Internet Radio - M1088 Module - any information or software?
              by DriversScrew
              I've got an Omnitronic TUNA-NET internet radio with an all in one module built around an esp32. The module must be a M1088 from ALD Ltd.
              The device shows only a white display screen pulsing every second. Seems to have some kind of boot issue. All voltages and the pcb thermal signatures look good.
              Any information about the M1088 module, schematics or firmware would be helpful....
              10-04-2025, 04:33 PM
            • Loading...
            • No more items.
            Working...