Headphones SHURE AONIC 50

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ut-norm
    Senior Member
    • Nov 2019
    • 70
    • italia
    #1

    Headphones SHURE AONIC 50

    Hi, I have these AONIC 50 headphones that no longer connect. They have been unused for about 2 years. The battery has been replaced and when turned on the LED only flashes blue continuously. Connected to the power supply they recharge. Connected to the PC you can hear the recognition signal but they are not recognized by the Shure Update Utility program (they do not connect) that I downloaded to try to install the firmware. I do not know how to proceed. It is a good product, even if expensive, that I would not like to put aside. It is out of warranty, unfortunately. Do you have any ideas on how to proceed?
    Thanks​
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • momaka
      RCA WHP141 wireless headphones wired up
      by momaka
      OK, this one dates back to 2015! I thought I had posted this, but realized I didn’t when I posted a picture of something else. So here it goes…

      Back in 2015, I bought a pair of RCA WHP141 wireless headphones at Micro Center for $2. I even mentioned it in the best cheap/free scores thread right here. Just forgot to follow up with that.

      As mentioned back then, these are (were) 900 MHz FM wireless headphones. No modern day Blutooth or anything like that. I knew they wouldn’t be great headphones or even that good… but the price was right! So let’s take...
      02-22-2023, 06:28 PM
    • KYBOSH
      Trying to Save - Samsung 65" The Frame (QN65LS03B) with no signs of life (One Connect Box)
      by KYBOSH
      I picked this one up today.
      Previous owner says no signs of life.
      TV looks immaculate and its a 2022 model year so I thought maybe the one connect cable was damaged.
      Got it home and put it on the Kill-A-Watt power meter and it was completely dead.

      The TV model is QN65LS03BAFXZA - version: CB06
      The One Connect Box BN44-01066D / BN96-54788Q / BN39-02470A.

      I immediately remembered EazyBone's Samsung The Frame TV no power....One Connect thread and am preparing myself to tear the One Connect open and hunt for dead parts.

      Will keep you all...
      04-05-2025, 08:32 PM
    • An-klamm
      Samsung 55HU8590 UE55HU8590 maybe one connect box ocb
      by An-klamm
      Hello!

      I have a TV that I can't get any further with.
      It is a Samsung UE 55HU8590 with one connect box.
      When I turn on the TV without the one connect box, the animation on the TV tells me to connect the ocb.
      As soon as I connect it, the TV restarts (panel goes dark) and the TV tries to start continuously (relay on the SMPS clicks about every 3 seconds).
      Since the TV works without ocb, I assume that it can't be the PSU?!
      I have measured all contacts of the one connect cable against GND on the ocb board and there is no short circuit anywhere.
      Is there...
      12-04-2023, 01:35 AM
    • EazyBone
      Samsung The Frame TV no power indicator issues diagnosing the one connect box
      by EazyBone
      I got a qn65ls03ta from someone who stated shows no power at all. They said they bought a fully new tv (same one) and tested the one connect box from the old one onto the new one and said it worked.

      I have no reason not to believe them, so I crack open the TV and test for voltages on the main board. There are none. I can't get any voltage at all. (Power comes from one connect to Main board then sends power to additional power board for backlights I believe)

      While doing some digging I found the connection to the one connect cable ON the main board seems to be missing small...
      07-28-2024, 04:46 PM
    • AlexVG
      SAMSUNG UE65HU8500 ONE CONNECT pinout connector request
      by AlexVG
      Hi,
      I came across with
      SAMSUNG UE65HU8500
      ONE CONNECT BN41-02135
      Chassis GOLF_UHD_1MP_JACK

      TV can not recognise ONE CONNECT box, so I need to know the pinout of the CN 3301 connector.
      Moreover, on the main is written A5V. However, cable connected this pin to the GND.






      Maybe somebody have an experience with the same issues?
      I need your help.
      Thank you....
      06-08-2025, 06:49 AM
    • Loading...
    • No more items.
    Working...