EUFY RoboVac X8 hybrid error S1

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • tehmatix
    Senior Member
    • Nov 2012
    • 174
    • UK
    #1

    EUFY RoboVac X8 hybrid error S1

    I have this cleaning/moping robot working fine for 7~8 months with not any problems. Now its coming with "error S1" and I don't know what to do.
    What I done since now is to check the battery which is ok, I replaced it with other battery and its doing same thing, I checked to see if anything is stuck or block, I did a hardware reset and connecting back to my wifi.
    Tags: None
    • CapLeaker
      Leaking Member
      • Dec 2014
      • 8020
      • Canada
      #2
      I think an error S1 is related anything to charging, not only the battery. By that I mean it includes the adapter, the charging base and the metal connections between the base and the robot itself.

        Comment

        • tehmatix
          Senior Member
          • Nov 2012
          • 174
          • UK
          #3
          It's doing that even without charging base, and the battery is fully charged. I will check again the power adapter.
          Can you tell what is doing the micro-usb port next to the battery?

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Bowline
              Dell E6400 PT434 type Battery Charging Stuck at 1%. Battery Pinouts?
              by Bowline
              My question pertains to understanding the control circuity inside a Dell PT434 type battery used in Dell E6400, E6410 and other Dell notebooks?

              Does anyone have a circuit diagram for the inside of a Dell PT434 battery and/or a description of how the control lines work to control this battery?

              My reason for asking is I have a battery which I cannot get to charge beyond 1% in a Dell E6410 or E6400.
              The LED bar graph charge indicator on the battery shows one LED lighted when the info button is pressed.
              I have tried multiple different Dell power adapters. My Dell...
              06-11-2025, 10:13 AM
            • drscoot
              HP X360 convertible battery blown fuse error, not charging
              by drscoot
              HP Modelnumber: 14-dh0061nb​
              This laptop had a shorted cap on a Vcore section. After replacement is works again. But there is still a battery issue.
              The battery is HT03XL and with the built-in component test from HP, in the Power section, I get an error: Logic State: Calibration required (20), Charge state: Blown Fuse (42)
              I have another same battery, also with error: Logic State: Very Weak (70), Charge state: Blown Fuse (42)
              And a third battery TF03XL (looks identical) with error: Logic State: OK (0), Charge state: Blown Fuse (42)
              All these 3 batteries are charging...
              charging section
              2 Photos
              12-15-2023, 05:54 AM
            • techfreak9356
              Vostro 3400 (LA-K033P) won't charge battery, everything else ok
              by techfreak9356
              I bought a Vostro 3400 motherboard (LA-K033P) to upgrade over my damaged Inspiron 5593 (LA-J091P) board. Everything else is ok except for the battery. This battery I am using now is already a replacement one since I disposed of the bloated original one. Back in the Inspiron 5593 motherboard, the battery charges fine and is identified just fine. However, with the upgraded motherboard, suddenly the replacement battery is labeled as "Not a dell battery". When I borrow a similar battery from my colleague (which did not have replacements yet), it is identified and charges just fine.
              ...
              09-14-2023, 11:10 PM
            • ferah831208
              Strange battery present behaviour in Lenovo Legion 5-15ARH05 mb model nm-d041
              by ferah831208
              Hello guys, i need help with this problem, I have a NM-D041 mobo, it came with low impedance in 3v linear regulator rail, the cause was a damaged EC controller ITE8227e-192. I ordered a new one and replaced it. This laptop have a different chip for keyboard management and it8227e pins for programming ITE chips are not accesible through keyboard interface, I flashed it using i2c interface pins with vertyanov programmer because laptop was dead and SPI flash didn't have power (only 3v EC) so it couldn't access firmware stored in SPI memory. I read SPI and extracted it8227 firmware from original BIOS...
              03-18-2025, 01:18 AM
            • Document Archive
              ISL6257HRZ ISL6257HRZ-T Laptop Battery Charger Datasheet
              by Document Archive
              ISL6257HRZ ISL6257HRZ-T Laptop Battery Charger Datasheet

              Highly Integrated Narrow VDC Battery Charger for Notebook Computers

              The ISL6257HRZ ISL6257HRZ-T is a highly integrated battery charger controller
              for Li-Ion/Li-Ion polymer batteries. ISL6257 is designed for
              Narrow VDC applications where the system power source is
              either the battery pack or the regulated output of the charger.
              This makes the max voltage to the system equal to the max
              battery voltage instead of the max adapter voltage. Operating
              at lower system voltage can improve...
              11-05-2024, 04:43 PM
            • Loading...
            • No more items.
            Working...