Looking to replace Capxon with Panasonic...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • drex79
    New Member
    • Mar 2015
    • 5
    • Canada

    #1

    Looking to replace Capxon with Panasonic...

    Could the following list of CapXon KF Vent capacitors;

    Code:
    Brand		Model		Capacitance	Voltage 	Width		Height
    CapXon		C638		1000uf		10V		10mm		16mm
    CapXon		C638		2.2uf		50V		5mm		11mm
    CapXon		C636		22uf		50V		6mm		11mm
    CapXon		C636		470uf		10V		8mm		12mm
    CapXon		C638		470uf		16V		8mm		16mm
    CapXon		C638		470uf		25V		10mm		15mm

    ... be replaced with the following Panasonic FC capacitors (from digikey) ;

    Code:
    Manufacturer Part Number	Manufacturer	Description				Capacitance	Tolerance	Voltage Rating	Ripple Current	Impedance
    EEU-FC1A102			Panasonic	CAP ALUM 1000UF 10V 20% RADIAL		1000uF		±20%		10V		787.5mA	68 mOhm
    EEU-FC1H2R2			Panasonic	CAP ALUM 2.2UF 50V 20% RADIAL		2.2uF		±20%		50V		29.25mA	1.8 Ohm
    EEU-FC1H220			Panasonic	CAP ALUM 22UF 50V 20% RADIAL		22uF		±20%		50V		100.8mA	1.3 Ohm
    EEU-FC1A471			Panasonic	CAP ALUM 470UF 10V 20% RADIAL		470uF		±20%		10V		416.2mA	117 mOhm
    EEU-FC1C471L			Panasonic	CAP ALUM 470UF 16V 20% RADIAL		470uF		±20%		16V		547.5mA	85 mOhm
    EEU-FC1E471L			Panasonic	CAP ALUM 470UF 25V 20% RADIAL		470uF		±20%		25V		746.2mA	65 mOhm

    Any other required information, let me know.

    Thanks!
    Last edited by drex79; 03-29-2015, 04:19 PM.
  • jetadm123
    Badcaps Legend
    • Feb 2010
    • 2169

    #2
    Re: Looking to replace Capxon with Panasonic...

    Those will work fine. The Panasonic FR and FM series are also good choices and may actually be cheaper.

    Comment

    • drex79
      New Member
      • Mar 2015
      • 5
      • Canada

      #3
      Re: Looking to replace Capxon with Panasonic...

      Excellent, thanks!

      Comment

      • budm
        Badcaps Legend
        • Feb 2010
        • 40746
        • USA

        #4
        Re: Looking to replace Capxon with Panasonic...

        Panasonic caps:
        https://www.badcaps.net/forum/showpo...2&postcount=65
        Never stop learning
        Basic LCD TV and Monitor troubleshooting guides.
        http://www.badcaps.net/forum/showthr...956#post305956

        Voltage Regulator (LDO) testing:
        http://www.badcaps.net/forum/showthr...999#post300999

        Inverter testing using old CFL:
        http://www.badcaps.net/forum/showthr...er+testing+cfl

        Tear down pictures : Hit the ">" Show Albums and stories" on the left side
        http://s807.photobucket.com/user/budm/library/

        TV Factory reset codes listing:
        http://www.badcaps.net/forum/showthread.php?t=24809

        Comment

        Related Topics

        Collapse

        • Andre Gilbert
          Panasonic TC-P55ST50 8 blinks then no blinks
          by Andre Gilbert
          Hello! yes I know there is already lots of information about this issue. I have a Panasonic TC-P55ST50 that originally displayed an 8-blink error code. Following the troubleshooting flowchart, I ended up replacing the SS board. However, even after replacing it, the issue persists. The TV turns on and stays on without displaying an image, and continuity is confirmed on all connectors. What am I missing here🤔?
          Ok Im a mechanical engineer ...but I thought I was able to follow a rather simple flowchart for electric troubleshooting 😂.

          TV Model: Panasonic TC-P55ST50
          ...
          11-20-2024, 08:52 PM
        • AquaMan Ua
          Problem with PANASONIC CF53 laptop after changing BIOS settings
          by AquaMan Ua
          Hello. I am asking you for a hint on how to solve the problem with my touchbook Panasonic CF53-2 standart model. After setting up the BIOS, the laptop displays the wrong image until Windows loads. (More precisely, it displays, but distorted, instead of the Panasonic image immediately after turning it on, it displays what is in photo #1 in the attached file) Then the image appears when Windows starts loading and then there are no problems with the screen until the reboot. If you enter the BIOS, just a black screen. If you connect an external screen, the image on it is the same as on the built-in...
          05-17-2025, 09:40 AM
        • stecos
          Panasonic Plasma main board repair (ST30 GT30 VT30 ST50 GT50 VT50),LED with 3 blincks
          by stecos
          Hi everyone!
          I happened several times, in the search for help from the web, to consult this very interesting forum.
          So I decided to sign up and I intend to participate actively by making available my knowledge and experience on the subject, I'm a new user but at the same time I'm old in the sense that I have 4 decades of experience in repairing and designing electronics but above all I'm a great passionate about the subject.

          Having said that I come to the gist of my post on the forum as the title suggests.
          For my passion for technology I'm now collecting several...
          11-28-2022, 11:39 AM
        • aa10aa10
          Panasonic Toughbook CF-33 mk1 BIOS repair
          by aa10aa10
          Good day,

          I have tried to remove BIOS supervisor password from Panasonic Toughbook CF-33 mk1. Model number CF-33AENABTG, unfortunately I don't have any other info.

          I read the BIOS using afuwin, edited it and tried to flash new edited BIOS using afuwin. Unsuccessfully. Afuwin showed "Error: Problem erasing flash." starting with 0x00040000 and stoped. Then I tried many other options to flash BIOS from Windows without any luck. Finally i rebooted the device - and no post. Afterwards I have read the corrupted bios chip (MX25L12873F) using EZP2010 programmer....
          01-21-2025, 06:13 AM
        • Mnawar27
          Panasonic CF-H2AU24EF3 bios locked
          by Mnawar27
          Hello ,my Panasonic CF-H2AU24EF3 I get bios password locked after factory reset, can't enter bios
          I need help to remove it,
          thankyou all.

          Panasonic CF-H2AU24EF3
          SN; 2FKCA26876...
          11-16-2024, 08:00 AM
        • Loading...
        • No more items.
        Working...