Re: Looking to replace Capxon with Panasonic...

Excellent, thanks!

Could the following list of CapXon KF Vent capacitors;

[CODE]
Brand Model Capacitance Voltage Width Height
CapXon C638 1000uf 10V 10mm 16mm
CapXon C638 2.2uf 50V 5mm 11mm
CapXon C636 22uf 50V 6mm 11mm
CapXon C636 470uf 10V 8mm 12mm
CapXon C638 470uf 16V 8mm 16mm
CapXon C638 470uf 25V 10mm 15mm
[/CODE]


... be replaced with the following Panasonic FC capacitors (from digikey) ;

[CODE]
Manufacturer Part Number Manufacturer Description Capacitance Tolerance Voltage...

Re: CapXon replacement for I-Inc iU191D 19-inch TFT LCD Monitor

Bump.

More specifically, would these be good candidates for replacements;

[CODE]
Manufacturer Part Number Manufacturer Description Capacitance Tolerance Voltage Rating Ripple Current Impedance
EEU-FC1A102 Panasonic CAP ALUM 1000UF 10V 20% RADIAL 1000uF ±20% 10V 787.5mA 68 mOhm
EEU-FC1H2R2 Panasonic CAP ALUM 2.2UF 50V 20% RADIAL 2.2uF ±20% 50V 29.25mA 1.8 Ohm
EEU-FC1H220 Panasonic CAP ALUM 22UF 50V 20% RADIAL 22uF ±20% 50V 100.8mA 1.3 Ohm...

Hello,

I found a (seemingly) brand new I-Inc iU191D 19-inch TFT LCD Monitor sitting in a pile of garbage. I brought it home, cracked it open only to find all CapXon capacitors, half bulging and 2 leaking.

I have replaced caps before but only the 'kits' for known monitors. Unfortunately, I haven't managed to locate any for this particular model, however it seems that the power board is used by other companies.

Here is the list of caps I de-soldered from the powerboard. All pulled from model FSP043-1PI01, P/N 3BS0123213GP REV1 ;

[CODE]...

Re: New Members - please post your introductions here

Long time lurker, finally decided to register.

I am an avid recycler/repurposer of electronics. I have managed to revive PCs and monitors instead of throwing them in the trash like most consumers.

I have learned a lot on these boards and hope to continue my learning experience further by finally being able to partake in discussions.