Identifying component Flyback? DC-DC?

Collapse
This topic has been answered.
X
X
 
  • Time
  • Show
Clear All
new posts
  • unimatrix93
    Badcaps Veteran
    • Oct 2021
    • 338
    • Magyarország

    #1

    Identifying component Flyback? DC-DC?

    Can I ask you guys help me identify this godforsaken component?

    I'm tearing my hair out finding this component.

    The board is from an egg incubator.
    i got it with a "popped cap" while there are many damaged components on it, which got succesfully identified with one exception:
    Click image for larger version

Name:	PXL_20240508_134252830.jpg
Views:	685
Size:	2.68 MB
ID:	3267072
    And here is the board where it came from (U1/1):
    Click image for larger version

Name:	PXL_20240508_134344927.jpg
Views:	382
Size:	2.40 MB
ID:	3267073
    Click image for larger version

Name:	PXL_20240508_101010963.jpg
Views:	367
Size:	4.32 MB
ID:	3267075
    As you can see, the IC is badly damaged. Only a few characters are visible and a unknown by me manufacturer logo. Also it has 3 pin on the top side.
    Can you please help me find out what is it?
    Attached Files
  • Answer selected by unimatrix93 at 05-10-2024, 01:20 AM.
    truclacicr
    Badcaps Veteran
    • Apr 2019
    • 289
    • australia

    The manufacturer is Crystal Source Microelectronics.

    Datasheet for CSC7136D:

    https://dfsimg2.hqewimg.com/group1/M...vXAKmCs236.pdf
    Attached Files

    Comment

    • truclacicr
      Badcaps Veteran
      • Apr 2019
      • 289
      • australia

      #2
      Try reposting your question here:

      https://www.eevblog.com/forum/repair/

      Comment

      • petehall347
        Badcaps Legend
        • Jan 2015
        • 4422
        • United Kingdom

        #3
        st micro

        Comment

        • redwire
          Badcaps Legend
          • Dec 2010
          • 3900
          • Canada

          #4
          Why go to eevblog, they are a cranky bunch over there.
          These IC's are in-country copies of real parts. It's not ST, it could be "SC" or "STC" the S is for Shenzhen. Most SOP-7's have pin 3 missing but here it is pin 7 which narrows it down.
          Looking at the circuit, closest IC PN8370SSC matches pinout and primary-side voltage sensing but it's too much at 18W.
          OP's board the sense-resistor on pin 4 is also blown.

          Comment

          • truclacicr
            Badcaps Veteran
            • Apr 2019
            • 289
            • australia

            #5
            PN8366 is rated for 6W loads:

            Comment

            • truclacicr
              Badcaps Veteran
              • Apr 2019
              • 289
              • australia

              #6
              I hate this forum's software.

              I hope this URL works:

              https://voltatech.ir/wp-content/uploads/2021/11/آی-سی-PN8366-پکیج-SMD.pdf (PN8366, 6W)

              https://radioremont.com/wa-data/publ...nts/PN8360.pdf (PN8360, 12W)
              Last edited by truclacicr; 05-09-2024, 04:35 PM.

              Comment

              • R_J
                Badcaps Legend
                • Jun 2012
                • 9514
                • Canada

                #7
                It could be this, CSC7136D seems to be the same pinout as the pn8360
                Attached Files
                Last edited by R_J; 05-09-2024, 08:00 PM.

                Comment

                • truclacicr
                  Badcaps Veteran
                  • Apr 2019
                  • 289
                  • australia

                  #8
                  The manufacturer is Crystal Source Microelectronics.

                  Datasheet for CSC7136D:

                  https://dfsimg2.hqewimg.com/group1/M...vXAKmCs236.pdf
                  Attached Files

                  Comment

                  • unimatrix93
                    Badcaps Veteran
                    • Oct 2021
                    • 338
                    • Magyarország

                    #9
                    Thank you everyone for helping me out!
                    You are the best. 🤘

                    I was pulling my hair out identifiying this exploded sh˙t.

                    Comment

                    • redwire
                      Badcaps Legend
                      • Dec 2010
                      • 3900
                      • Canada

                      #10
                      What about the blown sense-resistor at pin 4? Maybe "2R2" marking? gives 227mApk I think.

                      Comment

                      • unimatrix93
                        Badcaps Veteran
                        • Oct 2021
                        • 338
                        • Magyarország

                        #11
                        Originally posted by redwire
                        What about the blown sense-resistor at pin 4? Maybe "2R2" marking? gives 227mApk I think.
                        Yes, its a 2K2.
                        Also have to replace:
                        - 2KV keramic 1nF cap.
                        - B1000S05 bridge rectifier
                        - 450V/6.8uF capactior
                        - An unkown cap next to it
                        - A BT131-600
                        - A microswitch
                        - And repair some track.

                        Comment

                        • R_J
                          Badcaps Legend
                          • Jun 2012
                          • 9514
                          • Canada

                          #12
                          That resistor from CS to ground is likely a 2R2 (2.2Ω) resistor, not a 2K2 (2.2KΩ)
                          If the unknown cap is the vcc capacitor off D9, it is likely around 47µf/50v
                          Last edited by R_J; 05-13-2024, 06:46 PM.

                          Comment

                          • redwire
                            Badcaps Legend
                            • Dec 2010
                            • 3900
                            • Canada

                            #13
                            Does it have a fuse anywhere? I would add one.
                            Or for all the blown parts from the power surge, consider just using another small DC power supply feeding this control board. It must output 5 or 9 or 12V at most 1A.
                            The triac is for the turntable motor? No light or heater?

                            Comment

                            • R_J
                              Badcaps Legend
                              • Jun 2012
                              • 9514
                              • Canada

                              #14
                              The fuse is next to the plug in the heatshrink

                              Comment

                              • redwire
                                Badcaps Legend
                                • Dec 2010
                                • 3900
                                • Canada

                                #15
                                What pic is that in? I can't see any heatshrink in the posted pics.

                                Comment

                                • CapLeaker
                                  Leaking Member
                                  • Dec 2014
                                  • 7973
                                  • Canada

                                  #16
                                  redwire I think RJ means the first post second picture, very last plug on the bottom. Below it there is black something.

                                  Comment

                                  • petehall347
                                    Badcaps Legend
                                    • Jan 2015
                                    • 4422
                                    • United Kingdom

                                    #17
                                    this was a fuse . Click image for larger version

Name:	Screenshot from 2024-06-04 22-48-51.png
Views:	195
Size:	380.6 KB
ID:	3284165

                                    Comment

                                    • redwire
                                      Badcaps Legend
                                      • Dec 2010
                                      • 3900
                                      • Canada

                                      #18
                                      Melted copper traces, but nothing looking like an arc happened thought it should be black. Oh wait the trace she gone.
                                      I have issues with cheap chinese power supplies having no fuse, how do we allow this junk into our countries.

                                      Comment

                                      • unimatrix93
                                        Badcaps Veteran
                                        • Oct 2021
                                        • 338
                                        • Magyarország

                                        #19
                                        So after the IC arrived from China I repaired the damaged traces and proceeded to install the IC.

                                        The test resulted in a glorious explosion and the 2R2 resistor blew up also burning off the metal side of the ceramic capactor. The bridgerectifier (B1000S05) and the fuse (250V/10A) also died.

                                        The explosion happened after holding down the power button for a few seconds.

                                        What could cause this issue? I did not connect the other parts to the PCB like the motor and fan, only the main AC.

                                        Comment

                                        Related Topics

                                        Collapse

                                        • tony359
                                          Faulty CRT AKF12/Philips CM8500: bad flyback?
                                          by tony359
                                          Hi all,

                                          I have a CRT (Acorn AKF12, based on the 240V version of the Philips CM8500) which has stopped working. It's making a high pitched noise but not too high. I know this is symptom of a faulty flyback.

                                          What happens when a flyback fails? I see that the main voltages out of the PSU are not reaching rated values, as if there is a short.
                                          There are supposed to be 125V/26.5V/15.5V outputs but I am reading something like 48V, 10V and 8V. If I unplug the PSU from the rest of the PCB, I can measure the expected values.

                                          Can it be a short somewhere...
                                          08-22-2023, 04:39 PM
                                        • retrotechrestoration
                                          Looking for a flyback transformer for an Eizo TX-C7 MA-791 17" CRT
                                          by retrotechrestoration


                                          I just saved this magnificent RGB input Eizo Flexscan TX-C7 MA-791 from the local e-waste...good news, the tube works and the board looks great...the bad news, it sounds like the flyback is shorted. (Turns on...perfect picture...systemic high voltage crackling heard while the picture flickers...then it blows the 5A fuse in my isolated A/C power supply.)

                                          Anyone have any leads on possibly finding a replacement? (photo shows the flyback model numbers)​...
                                          03-22-2024, 06:50 AM
                                        • omaar
                                          Help Identifying an IC
                                          by omaar
                                          I need help identifying this IC and, if possible, the value of the capacitors next to it. It is part of the HDMI circuit of an EVGA RTX 2060 GPU. It suffered a short circuit, leaving the graphics card without video and the TV without image....
                                          06-06-2025, 07:48 PM
                                        • Digital Solutions
                                          Help Identifying IC on MacBooks Pro - 820-02020
                                          by Digital Solutions
                                          Subject: Help Identifying IC on 820-02020 (MacBook Pro A2338 M1, 2020) — C02045500 / EKQ8LL1A


                                          Hi all,


                                          I'm working on a MacBook Pro A2338 M1 (2020) with logic board 820-02020.

                                          The machine has a power issue — not powering on, and I'm trying to trace the fault.


                                          While inspecting the board, I found a cluster of components


                                          This area looks damaged or burned — there are about 4–5 components that seem affected


                                          I've attached a close-up photo of the chip and its surrounding area (see...
                                          06-05-2025, 03:43 AM
                                        • m1ch43lzm
                                          70mai Dash Cam A510 - help identifying connector on camera module
                                          by m1ch43lzm
                                          Hi everyone
                                          I have a 70mai Dash Cam A510 which failed after about 3 months of being installed in my car, likely due to heat, i got it from aliexpress so no point in trying to return it for warranty (and shipping it back would cost me almost the same as a new one from ali)
                                          The camera would boot loop showing 70mai logo on the screen, sometimes it would boot fine then the live view would freeze or display purple lines

                                          I already took it apart, and found out that the camera boots fine if i unplug the camera module from the main PCB, sometimes "playing" with the connector...
                                          05-11-2025, 06:02 PM
                                        • Loading...
                                        • No more items.
                                        Working...