Announcement

Collapse

Forum Rules *ALL NEW MEMBERS, PLEASE READ!! UPDATED!!*

First and foremost, Welcome to the Badcaps Capacitor Search Engine & Forums!

New members that have activated their accounts have limited access to certain features of the site until established. Members with zero posts have no access to the private messaging system. Also, members with zero posts may not edit certain profile attributes, such as signatures. New members also may not create new threads. However, new members with zero posts have full access to all technical information contained on this forum, and that also includes attachments (images and files that other members have uploaded), and new members that have activated their accounts are free to post replies to existing threads. If you wish to create a new thread, the fix is simple! All you need is ONE post to be able to have full unrestricted access, and that can be simply posting an introduction of yourself or say hello in THIS THREAD. This may seem a little strange, but it helps keep spam and abuse curved. Please note, that it may take up to one hour from your first post for the limits to be removed. If you make a post and don't immediately see the restrictions gone, be patient. The promotion system updates every hour.

Please complete your profile after making your first post, with your name, locale, and other info. It's nice to know members on a first name basis, and know where they're from. Makes for a much friendlier environment!

Posting rules for this forum will be STRICTLY enforced by myself as the owner/administrator, and my moderator crew.

Badcaps.net IS A BUSINESS!!! If you are a servicer, service center, or vendor of any kind in the computer/capacitor industry, you are NOT permitted to advertise, link, promote, or plug your business on this forum in ANY way! NO EXCEPTIONS!! This includes asking for "donations" in exchange for BIOS passwords or tech advice for anything! If I see you doing that, your post will be edited or deleted, and you warned. If it happens again, you will be banned. The only exceptions are the references to the companies quoted in the FAQ which the administration have added for the convenience of those around the world who have difficulty to source caps for their repair.

This also includes using this forum's private message system to solicit business. Members, if you receive a PM from anyone offering repair services or components, please alert me immediately! Myself or any of my moderators, will never private message a user soliciting business, for Badcaps.net, or any other servicer/vendor. If you PM me about repairing your device, I will reply and take care of you, however, I will not message you first.

------------------------------------

Posting rules:

This forum was created to be a technical support forum primarily for the do-it-yourselfers who choose to repair their own boards. Any and all technical questions are welcome!

1) Please use the SEARCH feature!! Your question may have been answered in another thread! Please search first and see if it has!

2) When posting a technical question, be as detailed as possible in your thread. The more information we have about your specific problem, the better we can answer your question.

3) Please use COMPLETE sentences, punctuation, and grammar! Nobody is perfect, hence, a spelling error on occasion is no biggie. However, posts/threads that are unreadable will be deleted. This includes any and all forms of 'ebonics', leet, chatroom jargon, and 'text message' shorthand and slang. This forum is not a chatroom/text message, please use full words and complete sentences.

4) Keep discussion on topic!! DO NOT HIJACK THREADS! It's easy to do (I've done it myself a few times...) Lets try to keep it down to a minimal!! If you have something really off topic, that's what the lounge is for!

5) Keep things civil! There will be no tolerance for flaming, bashing, hateful remarks, racial remarks, adult material of ANY kind, and so on.

6) THE LOUNGE RULES! The lounge is a place for off topic chit-chat! If you post something that might be considered questionable or something you don't want kids to see, or something you can't view at work/school, etc, please label that thread *NWS* or NOT WORK SAFE in the thread title as a warning. The Lounge is NOT moderated, anything is welcome... Feel free to post rants, jokes, cars, hot women (remember the NWS warning in the title), or just about anything within reason. It's an open forum! Please refrain from participating in political topics if you have thin skin, they can get heated sometimes!! Remember that we have members here from all over the world, with many different views and cultures. Political debates can turn really ugly, and really fast, and if they degrade to personal attacks and useless banter/bashing, moderator action will ensue. I want this forum to be a safe haven for technical discussions from all walks of life, so lets keep off topic discussions civil and friendly.

7) Spamming and spammers will NOT be tolerated or accepted in any way, shape, or form! Spam bots are instantly and permanently banned, and their threads deleted! The mod crew is really quick to zap spammers, we typically pop them before they even get to post. This also includes regular members as well. be courteous and not post spam. This includes links to off-site information that's not relevant to the thread at hand. Do not plug other websites, forums, or businesses in your signatures. You may do so in a thread if the off-site link you're posting is relevant to the topic, but otherwise, don't do it. If you see a thread which clearly a spam bot posting that we have not removed yet, DO NOT click any links in it!! Simply click the 'report bad post' button, and it'll be taken care of, usually within minutes.

8) Account removals & closures: Since no personal information is given in the creation of your Badcaps.net Forum account, requests to remove and/or delete accounts will be declined. Any requests for removal of threads & posts you created will also be declined. The reason is the missing posts can/will leave threads incomplete and fragmented. For the threads to be of help to others later on, information can't and won't be missing. However, if you inadvertently posted personal identifiable information in a post (such as an email address, real name, or phone number), please contact a staff member. In those cases, the post may be edited or removed, at the staff members discretion.

That's about it for the rules, the setup here is pretty loose. However, if you're caught violating any of the rules above, here's what will happen:

First offense: Warning by me or a moderator
Second offense: Banning for 1 day
Third offense: Banning for 3 days
Fourth offense: Banned permanently.

If you do something really dumb, or are just a troll, I will skip the warning and the temporary banning, and ban you permanently!

The rules are pretty cut and dry... However, if you have any questions about this policy, feel free to contact me.
See more
See less

ESR meter upgrades

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Re: ESR meter upgrades

    I was pissed off that I kept 3.3.something for a long time because it produced the smallest code...
    Alas had OS compatibility issues as it was kept back for so long and forced to delete it.

    Comment


      Re: ESR meter upgrades

      Originally posted by stj View Post
      post foto's of the board
      Picture of the board is shown in #825.
      John
      Last edited by Per Hansson; 12-05-2017, 12:35 PM. Reason: Added direct link

      Comment


        Re: ESR meter upgrades

        test these - let me know which gives you a display.
        that's all its for btw, determining how the display is wired.
        Attached Files

        Comment


          Re: ESR meter upgrades

          Originally posted by stj View Post
          test these - let me know which gives you a display.
          that's all its for btw, determining how the display is wired.
          Hi stj;Have downloaded your firmware the strip grid16 is the one that gives a display see thumbnails the other (16mz) is blank.
          John
          Attached Files

          Comment


            Re: ESR meter upgrades

            good, now go into the contrast menu if you can, and find the best setting

            Comment


              Re: ESR meter upgrades

              Originally posted by stj View Post
              good, now go into the contrast menu if you can, and find the best setting
              Hi stj; do not seem to be able to get the contrast menu up only having one button to press.
              John

              Comment


                Re: ESR meter upgrades

                long press / short press combinations should work - sort of.

                Comment


                  Re: ESR meter upgrades

                  Originally posted by stj View Post
                  long press / short press combinations should work - sort of.
                  Tried a combination of long short presses with link in and out all to no avail.

                  john

                  Comment


                    Re: ESR meter upgrades

                    If I press the button once it goes into test and then this screen with no component connected and stays like this until battery is disconnected.
                    John
                    Attached Files

                    Comment


                      Re: ESR meter upgrades

                      when it's off, hold the button down.
                      you will get a menu, or it's not enabled - i didnt check.

                      Comment


                        Re: ESR meter upgrades

                        Same board as TEDDIBEAR have.Except crystal at 16MHz.
                        Replaced push button with encoder.
                        Tested few versions,some no display,some display OK but only push button works no encoder.
                        Finally found this one

                        But crystal on board was already 16MHz so display double value.
                        Change value in makefile and works fine.

                        Comment


                          Re: ESR meter upgrades

                          Originally posted by stj View Post
                          when it's off, hold the button down.
                          you will get a menu, or it's not enabled - i didnt check.
                          No unable to get any menu by holding button down. only test which if you do not insert component reads 54.62pf then if you insert 3 pin link it will run through some information as pictured in previous thread this is the only way to get it to switch off automatically, if you do not insert link it just sits at 54.62pf.
                          John

                          Comment


                            Re: ESR meter upgrades

                            the test i posted is 16MHz, it was to see how the display was wired.

                            Comment


                              Re: ESR meter upgrades

                              Originally posted by TEDDIBEAR View Post
                              No unable to get any menu by holding button down. only test which if you do not insert component reads 54.62pf then if you insert 3 pin link it will run through some information as pictured in previous thread this is the only way to get it to switch off automatically, if you do not insert link it just sits at 54.62pf.
                              John
                              ignore that firmware - it's done it's job.
                              now i know how your display is wired, i can make a "real" firmware later.

                              Comment


                                Re: ESR meter upgrades

                                Originally posted by gabiz_ro View Post
                                Same board as TEDDIBEAR have.Except crystal at 16MHz.
                                Replaced push button with encoder.
                                Tested few versions,some no display,some display OK but only push button works no encoder.
                                Finally found this one

                                But crystal on board was already 16MHz so display double value.
                                Change value in makefile and works fine.
                                Hi have never worked on makefile so would not know how to change any values
                                any help would be appreciated.
                                John

                                Comment

                                Working...
                                X