-
-
Re: HP BIOS unlock tool
Used the tool for probook 650 g3 .no boot!SORRY WAS BADF CHARGER.Last edited by bachir2004; 11-24-2019, 08:16 AM.Comment
-
Re: HP BIOS unlock tool
can i use some BIOS Backup Tools to get the dump from a EliteBook 840 G1?
i tried with Universal BIOS Backup Toolkit 2.0
can u check this for me please?Last edited by xerano; 12-05-2019, 01:02 PM.Comment
-
Re: HP BIOS unlock tool
But there is no point in doing it like that. You can't program eeprom without using a SPI programmer anyway. So just get a programmer and read it with that.
The other way would be decrypting the password but good luck with that (and share knowledge if you succeed
)
Comment
-
Re: HP BIOS unlock tool
My Problem is, that i tried serveral Times to dump the BIOS with the CH341a Programmer and all dumps are faulty.But there is no point in doing it like that. You can't program eeprom without using a SPI programmer anyway. So just get a programmer and read it with that.
The other way would be decrypting the password but good luck with that (and share knowledge if you succeed)
The question is, can someone Check my dump that i created with the Tool. will this dump Work to Flash them?Comment
-
Re: HP BIOS unlock tool
Then you need to deal with why it turns up faulty. If you can't read properly, you can't write properly.
What you have to do is:
*Disconnect battery
*Connect charger
*Turn on laptop (Go to F1 screen or whatever you like, doesn't matter)
*Turn off laptop using the power button and DO NOT disconnect charger
*Attach soic8 clip to eeprom
*Read bios.
*Mod bios.
*Write bios.
Turning laptop on and off is very helpful on HP-s.Comment
-
Re: HP BIOS unlock tool
Can i use a SOIC8 DIP Socket Adapter too? I would desolder the ICComment
-
Re: HP BIOS unlock tool
please help me
i have windows 64bits
thank uAttached FilesComment
-
-
Re: HP BIOS unlock tool
okay i have desoldered my chip and dumped it with AsProgrammer 1.41 and CH341A Programmer
then i used the HPUnlocker Tool and flashed this Image to the Chip (i ereased the Chip before)
now i have only black screen and Blinking CapsLock Key (5 times blinking)
can someone check my dumps to verify please?
Thank you
Comment
-
Re: HP BIOS unlock tool
@RethoricalCheese please Help me
Comment
-
Re: HP BIOS unlock tool
Here you areokay i have desoldered my chip and dumped it with AsProgrammer 1.41 and CH341A Programmer
then i used the HPUnlocker Tool and flashed this Image to the Chip (i ereased the Chip before)
now i have only black screen and Blinking CapsLock Key (5 times blinking)
can someone check my dumps to verify please?
Thank you
After programming, Power on laptop and let it power cycle a couple of times. This is CleanME BIOS also so you need to wait for it to finish everything...Last edited by razor_amd; 12-07-2019, 10:13 AM.Comment
-
Re: HP BIOS unlock tool
i traying to open itComment
-
Comment
-
Re: HP BIOS unlock tool
THANK YOU SOOOO MUCH!
have u only use the HPUnlocker Tool? i have 2 another Elitebooks can i use this tool to done this?
or have u special mod used?Comment
-
Hi guys i like to buy tool that automatic unlock bios or find password also can flash and repair bios ic, looking for good tool have good software that have 1 click and unlock bios any recommend good tool? looking for sony ps5 and and laptop bios
Thanks -
Need Clean BIOS/EC Bin File for Lenovo ThinkPad Yoga 11e - Stuck with 0275 Error CMS
Hello everyone,
I am attempting a repair on a Lenovo ThinkPad Yoga 11e that is currently stuck at boot with the error: "0275 error CMS" even after setup new bios battery and will not allow me to enter the BIOS/Setup.
This is a critical issue that I believe requires flashing the BIOS chip directly using a programmer (e.g., CH341A/RT809H), as standard software updates or resets are not possible.
I have opened the laptop and identified the main BIOS chip... -
Hello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.
Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,... -
Hi all,
My Samsung Galaxy Book 2 Pro 15.6-inch laptop has no display and won't boot.
The charging red LED lights up, but the charging screen doesn't show any indication.
When I press the power button, the blue LED cycles on and off three times, then the screen doesn't turn on, and the device won't boot.
(I've tried removing the battery and resetting the device, but the issue persists.)
NoteBook Model name : Samsung NT955XED-KK51G(Galaxy book2 pro, i5-1240p, 15.6inch AMOLED)
PCB model name : Venus2-15-5G(REV1.2), Venus2-15 ADL NPC
S/N : 5RNK9FFT70... -
Hi everyone
I noticed on the Xgpro software the BIOS backup files have extra bytes at the end when reading some chips, this is because the Xgpro software also reads the OTP region of those flash chips, and by default will append that region to the saved file
Programmer models: XGecu TL866II Plus / T48 / T56 / T76
Example: GD25LQ128D (1.8V), IC size is listed as 0x1000000 Bytes (16777216 bytes) + 0xC00 bytes, those extra 0xC00 bytes will be appended to the end of the saved file by default, resulting in a file size of 16780288 bytes
There's also an extra OTP Secu.R...
Comment