7 have flashing lights but I'm confused everyone with the same model number has a different board then mine, no Bonbe capacitor. Please Help
Attached Files
-
-
Re: Philips 50pf9631d/10
hello no answer 8001 led flashes 5 times 5 fault codes for VS .. here I have disconnected the power supply connector (PS-505-PHN LJ44-00125 20060705 Rev.02) 8006 cn ... TV starts with LED 8001 and LED 2000 hand no logic unit 50'HD VS.1 ASIC) green alas no picture fix, remote react Ar / walking and volume, mute more channels, I believe pane on module (model 50HD W1 Y-MAIN PCB code 41 LJ-04084A
Rev. No. Ri.0 (07.06.15) following someone can help me thank you. -
Re: Philips 50pf9631d/10
Your issue may not be a power supply problem. You may have a peripheral board that is failing. A 42" Philips I worked on that had 7 blinks had a bad CBA audio board. I'm not saying that's your problem, but I wouldn't automatically assume the power supply is at fault. These Philips TVs can be tricky. I'd do a couple things:
(1) Thoroughly examine the power supply with a flashlight to see if you can find any burned components.
(2) Try disconnecting various boards from the TV circuit one at a time then try to turn on the TV after disconnecting each board. When I had an audio board problem and I disconnected the CBA board, the TV turned on and I had a picture (of course, I had no sound).
What is your chassis version (e.g. BJ2.2)? There should be a label on the back cover of the TV with this info. You can search Tom's service manual database using the chassis version: http://www.toms-service-manuals.com/Last edited by capkid; 08-26-2013, 03:21 PM.Comment
-
Re: Philips 50pf9631d/10
hello all my chassis is ftp 2.2a aa model s42ax-xb01 product code bx1a0508 344594 i have looked on toms service manuals and cant find one i have checked the power supply with a flashlight ,cant see any problems .have diconected boards one at a time no change in voltage readings i am adding a picture of the power supply ,have circled transformer KE 04477a which i think may have been hot but i have no data to test it any sugestions on where to find a service manual would be great cheers ShaynAttached FilesComment
-
-
Re: Philips 50pf9631d/10
hi, "capkid" I thank you for the aid, for me I disconnect cn8006 all his attention connector present Demare tv with LED 8001 and 2000 Alume I CROI problem on Y-MAIN.
I consider food, not burned components, my version of the chassis is BJ3.0E PA? elas the Shema does not even thank you.Comment
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic... -
hello everyone,
I don't normally do tv repairs but this is a case with my personal TV which got fried together with many other electronics in my house after a thunderstorm.
The TV is a Philips 65PUS8518/12 which had no power. I measured and concluded that the main board was probably fried through ethernet or hdmi. I found a board with same number 715GD328-M0F-B00-005Y (I had G) but from a 55PUS8518. The TV starts but the image is doubled, distorted. I need to set the panel code which is 016 according to the sticker on the back but I can not seem to do it.
... -
All left and right refers to looking from rear of TV (or looking from front with TV upside down)- TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
- Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
-
Hello partners.
Could someone tell me how to make this Philips TV source work without the mainboard being connected? The model of the board is EAX65423701 (2.1) and the model of the Philips TV is 40PFH40009/88.
The TV is dead, there is no standby light, however there is a voltage of 12v on the pins ( included 12v VAU ) and 3.2v on the PS-ON pin (see photo) when the power board is connected to the main board. If I disconnect both boards I only get 8 volts on 12v pins. I would like to rule out a fault in the main board by making it work, but so far no one has been able to tell...
Comment