Hi,
Can some kind mod please remove the usuarios.lycos.es content from the Ghetto Mod Thread?
Thanks,
JP
Can some kind mod please remove the usuarios.lycos.es content from the Ghetto Mod Thread?
Thanks,
JP
-
-
Re: Ghetto Mod Thread & usuarios.lycos.es
not seeing anything unusual. -
Re: Ghetto Mod Thread & usuarios.lycos.es
Google Chrome warns:
Danger: Malware Ahead!
Google Chrome has blocked access to this page on www.badcaps.net.
Content from usuarios.lycos.es, a known malware distributor, has been inserted into this web page. Visiting this page now is very likely to infect your computer with malware.
Malware is malicious software that causes things like identity theft, financial loss, and permanent file deletion.Comment
-
Re: Ghetto Mod Thread & usuarios.lycos.es
use Firefox
problem solved
Comment
-
Re: Ghetto Mod Thread & usuarios.lycos.es
Comment
-
Re: Ghetto Mod Thread & usuarios.lycos.es
wtf? lolComment
-
Re: Ghetto Mod Thread & usuarios.lycos.es
It's Ratdude's girlfriend!!
J/K Larry!<--- Badcaps.net Founder
Badcaps.net Services:
Motherboard Repair Services
----------------------------------------------
Badcaps.net Forum Members Folding Team
http://folding.stanford.edu/
Team : 49813
Join in!!
Team StatsComment
-
Re: Ghetto Mod Thread & usuarios.lycos.es
Might be due to this thread if the mentioned domain serves malware...
https://www.badcaps.net/forum/showthread.php?t=5412"The one who says it cannot be done should never interrupt the one who is doing it."Comment
-
Re: Ghetto Mod Thread & usuarios.lycos.es
I'd do it myself but can't edit the post anymore. If for who knows the reason these three pics make Google go ballistic, please substitute:
Comment
-
Re: Ghetto Mod Thread & usuarios.lycos.es
Get this too on chromeAttached FilesDo NOT touch heatsinks when testing for voltages as they may be LIVE!Comment
-
-
Problem
This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached.... -
Hi, i have a Panasonic Cf-W5 with the bios password, I tried remove cmos but problem didnot solve.
I uploaded the picture after remove cmos battery, It look like this is a Phoenix bios. The bios dump file in the link i attached
Please help me remove bios password.
Thank you so much -
every time I open the tool, I have the screen that appears
and I am always in a hurry to use it so I click and it automatically sends me a link to the manufacturer.
It annoys me lol.
2 solutions to remove it.
Either you remove pic.bmp and it no longer appears so no more links when clicking.
or else you can modify the exe to remove the .bmp
hope this helps users...01-15-2025, 03:24 PM -
Hello everyone
I have locked bios dell pc OptiPlex 3000 Tower
I need to remove bios password
or if anybody can help me how to remove it by my self
Thank you !!... -
I am new to hot air soldering. I need to remove one chip from the board. I have a hot air solder and I set the temperature to 350°C. I slowly started heating the chip, but the solder didn't melt. I heated it for about 5 minutes, but the solder still wouldn't melt. I increased the temperature to 450˚C and still nothing. After a while, the board started to change color, but the solder still didn't melt.
Fortunately, I'm testing it on old network switches to see how it works.
What am I doing wrong?
I've seen a lot of videos on youtube and everyone got the solder melted and the...
Comment