Help Identify cap type

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Preowner
    Member
    • Mar 2005
    • 13
    #1

    Help Identify cap type

    So I pulled out the psu on my sv24 project and tested it. It was making the high pitch noise indicating a problem. I pulled it apart and saw a slightly domed cap. I had to desolder it to see the sides but..

    The markings read this

    Side 1:
    TNR
    Fuhjyyu
    470uf 16v

    Side 2:
    (M)P7
    CE105 C
    Vent

    So now Im wondering if it is a low esr cap or what. Hopefully not so I can more easily get it localy.
    Tags: None
    • MD Willington
      Badcaps Veteran
      • Sep 2004
      • 702
      #2
      Typically most capacitors in a power supply are low esr.
      Ya'll think us folk from the country's real funny-like, dontcha?

      The opinions expressed above do not represent those of BADCAPS.NET or any of their affiliates.

        Comment

        • Preowner
          Member
          • Mar 2005
          • 13
          #3
          So.. The question that has probably been asked all too many times:

          What effect would be observed by using a standard non low esr cap?

          If I can't get one, this psu is useless anyway. Its worth a try to me.

            Comment

            • bushytails
              Moderator
              • Dec 2004
              • 217
              #4
              The effect of using non-low-esr caps could range from working perfectly to having most of the symptoms of exploded bad caps...

              --Randy

                Comment

                • willawake
                  Super Modulator
                  • Nov 2003
                  • 8457
                  • Greece
                  #5
                  please test it and report back. we know you are gonna try it whatever we say heh
                  capacitor lab yachtmati techmati

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • thesame
                      DVR HIKVISION DS-7208HWI-E1/A BOARD DS-80104 REV 2.2 help identify burnt components
                      by thesame
                      Hy guys , i have a DVR board DS-80104 REV 2.2 that was powered wrong, i have some smds on the board that are blown and i can't identify them , maybe if someone has this board somehow and we can identify the smds', i have searched online and i can't find a schematic.
                      The smds are SOT-23-6 , one of them i think it has the marking ADJF since i found another one on the board with this marking , but the other one it seems that it starts with AG or it looks like. I would really apreciate if someone could help me identify those IC's .

                      ​...
                      02-27-2024, 04:31 AM
                    • silver60618
                      Lenovo Legion 7 - Help Identify IC
                      by silver60618
                      Hi gang, its a long shot, but working on Lenovo Legion Pro 7 motherboard NM-F091, and trying to identify this component near GPU with marking "eHFQH" that is burned and shorting the board. Looks like power management IC

                      I couldnt find any schematic or boardview. The CPU side also has same chip. Any way to identify this chip? or take measurements from the good chip to determine what it is?

                      Any help would be appreciated...
                      07-02-2025, 12:16 PM
                    • chth96
                      How can I identify varistor which have been blew up?
                      by chth96
                      I mistakely pluged 100v japanese retro game console to 220v outlet.
                      So It seems that glass fuse and varistor have been blew up.
                      I can identify that voltage and ampere value of glass fuse(250V LF 1.6A),but It is impossible to identify varistor type in my sega saturn PSU(YAMAHA 35M07U XR258)
                      Is there any way to identify varistor type in my sega saturn PSU?
                      Any reply would be appreciated.


                      EDIT:
                      It seems that I finally found out what type this black varistor is. It is Panasonic ERZV05D221 “ZNR” Transient/Surge Absorbers (Type D) Varistor Voltage...
                      2 Photos
                      11-26-2023, 08:52 AM
                    • freakorio
                      Need Help To Identify Component on Ymain LJ41-05120A
                      by freakorio
                      Hi guys , i hope this is the right place , i got Plasma Samsung PS-50Q91H and i need to repair Ymain LJ41-05120A , but those component are burn and i can not identify to replace those part , and the part are blue capacitor and the location are C5105 and C5106 and here i attach the part that need to identify , and one more thing , i also need to replace Zener Diode on location ZD5502 and the part are BZV55C because mine is short but i don't know the voltage because those parts are release with many type of voltage. Looking forward for your kindly reply
                      1 Photo
                      05-21-2024, 02:32 AM
                    • baiceanu_stefan
                      nm-f251 Schematic, boardview or help identify componente
                      by baiceanu_stefan
                      Hello, I have a legion pro 5 16arx8 serial number pf4bf4aw mb code nm-f251 rev1.0 which was dissasembled by the client for cleaning. Now it does start but for 20 secs after that fans run at maximum and then shut down. Found PU8302 burned but cannot identify it the part. It is written eHFAA on it but didn't found any info, no boardview, nothing. Can anyone help identify the part so I can order it from somwhere? Ataching some pictures of the motherboard, serial number and part. Than\k you...
                      04-24-2024, 12:49 AM
                    • Loading...
                    • No more items.
                    Working...