Replacement smoothing cap for a 24V board.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Henke
    Member
    • Oct 2022
    • 41
    • Sweden

    #1

    Replacement smoothing cap for a 24V board.

    Hello.

    I found a bad smoothing cap efter the 230-24V transformer. The specific one are mounted on the negative side of the diode after the transformer on the 24V side. It supplies +24vdc and -24vdc

    it's a 50V 22uF one. The closest I found at home is rated 100V, 39uF. Can I use that or what could fail?
  • Per Hansson
    Super Moderator
    • Jul 2005
    • 5895
    • Sweden

    #2
    Sure you can use that as replacement.
    "The one who says it cannot be done should never interrupt the one who is doing it."

    Comment

    • CapLeaker
      Leaking Member
      • Dec 2014
      • 7986
      • Canada

      #3
      No problem with that replacement cap.

      Comment

      Related Topics

      Collapse

      • Tynan Dill
        Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
        by Tynan Dill
        I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

        Upon bringing it home and plugging it up, it showed a standby light.

        I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

        The screen seems to blackout and stay black, but with a flashlight I can see the display.

        With my Playstation 4 connected via HDMI, and running a game I can hear sound.

        Assuming...
        11-22-2024, 01:46 PM
      • boosti45
        Macbook pro logic board replacement parts quesion
        by boosti45
        i have a 2020 macbook pro 13" A2251 with 820-09149 logic board so i found an issue with chip labeled U6903 according to schem. boardview using flexBV software, so i removed it from the board and the issue im having is that the chip says "07A08FI ELC180​" on top of it but when searching for a replacement chip, i can find tons of identical looking chips that also have "ELC180" printed on them but the first set of digits is never the same so im trying to find out if i need this exact chip with these same numbers as mine and if not which ones are compatible as a replacement?...
        08-21-2024, 05:23 AM
      • Cvrado
        Led TV Board Replacement, same part number and model, different size
        by Cvrado
        Hello my friends!
        I have a question that I think you can answer and help me with!

        I have a faulty main board from an led TV. And I found the same part number board and design but is from a 43" TV and I want to use it on a 65". On its stickers , all are the same except the wattage for the LEDs backlight, both state different watts and LED Voltages!

        So I presume that the backlight inverter section from the replacement board has lower wattage then the original one, am I right?

        My concern is that the board won't draw enough voltage to the bac...
        03-02-2024, 05:05 PM
      • eum
        PSU Board repair or replacement Ecler Nuo 2.0 DJ mixer
        by eum
        Hi,
        I try to repair this fly-back type PSU, I diagnosed (identifiable) dead N-MOS and fuse, but there are 3 smd resistors on the bottom that burned and became unreadable.

        The support in charge of the brand in France managed to get me the schematics from Ecler, but it didn't include the PSU board. After a while they finally told me that the unit was too old so they don't have the PSU board schems.

        I can find replacement PSU board online, but only for the Nuo 3 or 4 or 5, and it seems they ar compatible with each other, as I often find boards compatible with these...
        07-28-2023, 03:05 PM
      • Hakuu
        LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
        by Hakuu
        Hi There,

        This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

        After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

        More Details

        TV Model - LG OLED77G1PUA

        Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
        07-12-2023, 02:37 PM
      • Loading...
      • No more items.
      Working...