Articles in computer and electronic magazines about bad capacitors

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • japlytic
    Badcaps Legend
    • Oct 2005
    • 2086
    • Australia

    #1

    Articles in computer and electronic magazines about bad capacitors

    In PC User, November 2005 (Australian issue), there was an article about bad electrolytic capacitors on mainboards. Two of the brands pictured were Rifeking and Jackcon.

    Also in Silicon Chip, May 2003, there was an article about bad capacitors on mainboards (one of them was a Chhsi in a photo)... the computer (Gateway) I had at this time did not have this issue at all.

    Are there any other articles about bad capacitors in computer (and electronics) magazines?
    My first choice in quality Japanese electrolytics is Nippon Chemi-Con, which has been in business since 1931... the quality of electronics is dependent on the quality of the electrolytics.
  • arneson
    Badcaps Legend
    • Sep 2005
    • 1267

    #2
    Re: Articles in computer and electronic magazines about bad capacitors

    Great topic JAP, cuts to the bone.
    May take some research to dig up archival stuff.
    Jim

    Comment

    • arneson
      Badcaps Legend
      • Sep 2005
      • 1267

      #3
      Re: Articles in computer and electronic magazines about bad capacitors

      http://www.geek.com/news/geeknews/20...0207018535.htm
      Not a magazine per say but dates back to Feb,03, has some interesting references.
      I'm sure this has been mentioned here before.
      Jim

      Comment

      • cods69
        Senior Member
        • Oct 2005
        • 92

        #4
        Re: Articles in computer and electronic magazines about bad capacitors

        Here is a link to the Silicon Chip article Japlytic mentioned.....
        http://siliconchip.com.au/cms/A_30328/article.html

        ...and another online article at overclockers (sorry if it's already linked).
        http://www.overclockers.com/tips00140/

        Comment

        • arneson
          Badcaps Legend
          • Sep 2005
          • 1267

          #5
          Re: Articles in computer and electronic magazines about bad capacitors

          Link to John Dvorak article, didn't work.
          Last edited by arneson; 10-14-2005, 10:11 PM. Reason: bad link
          Jim

          Comment

          • arneson
            Badcaps Legend
            • Sep 2005
            • 1267

            #6
            Re: Articles in computer and electronic magazines about bad capacitors

            http://www.faradnet.com/company/paper.htm
            This one may work.
            Jim

            Comment

            • cods69
              Senior Member
              • Oct 2005
              • 92

              #7
              Re: Articles in computer and electronic magazines about bad capacitors

              Wiki article "Capacitor Plague"......again, sorry if it's already linked.
              http://en.wikipedia.org/wiki/Capacitor_plague

              Badcaps has a link at the bottom

              Comment

              • MD Willington
                Badcaps Veteran
                • Sep 2004
                • 702

                #8
                Re: Articles in computer and electronic magazines about bad capacitors

                Had some links to IEEE articles...still waiting for my free subscription after 5 years LOL...
                Ya'll think us folk from the country's real funny-like, dontcha?

                The opinions expressed above do not represent those of BADCAPS.NET or any of their affiliates.

                Comment

                • pauloncall
                  New Member
                  • Feb 2005
                  • 9

                  #9
                  Re: Articles in computer and electronic magazines about bad capacitors

                  Yesterday I got a call from someone who identified himself as a "reporter for Cnet" and asked some questions regarding the Intel mobo w/ bad caps that I posted. He said they would be running a story about it last night but I haven't see anything yet. Anyone else get a call?

                  Comment

                  • MD Willington
                    Badcaps Veteran
                    • Sep 2004
                    • 702

                    #10
                    Re: Articles in computer and electronic magazines about bad capacitors

                    I have received emails from:
                    Michael Singer
                    Senior Writer
                    CNET News.com
                    235 Second St. 6th Floor
                    San Francisco, CA 94103
                    (415) 344-2687

                    regarding the bad caps issue with DELL...
                    Ya'll think us folk from the country's real funny-like, dontcha?

                    The opinions expressed above do not represent those of BADCAPS.NET or any of their affiliates.

                    Comment

                    • japlytic
                      Badcaps Legend
                      • Oct 2005
                      • 2086
                      • Australia

                      #11
                      Re: Articles in computer and electronic magazines about bad capacitors

                      APC Feb 2006 (Page 11): Dell is allocating $US300m for repairs to affected computers. (These forums were mentioned in the story)
                      My first choice in quality Japanese electrolytics is Nippon Chemi-Con, which has been in business since 1931... the quality of electronics is dependent on the quality of the electrolytics.

                      Comment

                      • willawake
                        Super Modulator
                        • Nov 2003
                        • 8457
                        • Greece

                        #12
                        Re: Articles in computer and electronic magazines about bad capacitors

                        badcaps in Space
                        http://www.spaceref.com/news/viewnews.html?id=1037
                        http://www.spaceflightnow.com/news/n0503/15minotaur/
                        capacitor lab yachtmati techmati

                        Comment

                        • arneson
                          Badcaps Legend
                          • Sep 2005
                          • 1267

                          #13
                          Re: Articles in computer and electronic magazines about bad capacitors

                          The accuracy of the material alignment in manufacturing plays a role in whether the capacitor would fail after a certain number of thermal cycles. When the separation occurs, the electrical contacts in the capacitor no longer function properly, says Goldman.

                          That is quite an article Willawake, The above is in reference to the space shuttle engine control box caps.
                          Jim

                          Comment

                          • Rainbow
                            Badcaps Legend
                            • Aug 2005
                            • 1374

                            #14
                            Re: Articles in computer and electronic magazines about bad capacitors

                            I wonder if they use GSC or Fuhjyyu

                            Comment

                            • willawake
                              Super Modulator
                              • Nov 2003
                              • 8457
                              • Greece

                              #15
                              Re: Articles in computer and electronic magazines about bad capacitors

                              guess they used rubycon on the blackbird

                              Attached Files
                              capacitor lab yachtmati techmati

                              Comment

                              • Per Hansson
                                Super Moderator
                                • Jul 2005
                                • 5895
                                • Sweden

                                #16
                                Re: Articles in computer and electronic magazines about bad capacitors

                                Aww man, now I became so curious as to what brand it actually was ;-)

                                Great find Willawake!!!
                                "The one who says it cannot be done should never interrupt the one who is doing it."

                                Comment

                                • PeteS in CA
                                  Badcaps Legend
                                  • Aug 2005
                                  • 3581
                                  • USA, Unsure of Planet

                                  #17
                                  Re: Articles in computer and electronic magazines about bad capacitors

                                  Relatively few mfrs make space-qual electronic parts. You do exotic shake-and-bake tests, create mounds of paper, and sell a few thousand or a few tens of thousands of parts ... if they pass the tests. Not an attractive market for companies geared for high volume production.

                                  My guesses as to vendors would be Cornell-Dubilier, whoever owns the Sprague mil-spec division, and/or whoever owns the Mallory mil-spec division.
                                  PeteS in CA

                                  Power Supplies should be boring: No loud noises, no bright flashes, and no bad smells.
                                  ****************************
                                  To kill personal responsibility, initiative or success, punish it by taxing it. To encourage irresponsibility, improvidence, dependence and failure, reward it by subsidizing it.
                                  ****************************

                                  Comment

                                  • MD Willington
                                    Badcaps Veteran
                                    • Sep 2004
                                    • 702

                                    #18
                                    Re: Articles in computer and electronic magazines about bad capacitors

                                    ...Scary...
                                    Ya'll think us folk from the country's real funny-like, dontcha?

                                    The opinions expressed above do not represent those of BADCAPS.NET or any of their affiliates.

                                    Comment

                                    • cods69
                                      Senior Member
                                      • Oct 2005
                                      • 92

                                      #19
                                      Re: Articles in computer and electronic magazines about bad capacitors

                                      I never cease to be amazed at the various places you will find crap caps.
                                      Thank freak that they found/replaced those ones in time - I just hope NASA/Airlines/Military sit up and take notice.
                                      The Airlines worry me with never-ending cost cutting.

                                      Comment

                                      Related Topics

                                      Collapse

                                      • dragon3x
                                        After updating motherboard capacitors, what to do next (Asrock K7VT2, SOLTEK SL-75FRN2L)
                                        by dragon3x
                                        Hi, I have some 32 bits computer motherboards that need repair, as they fail to
                                        power on.

                                        Here are some examples :

                                        (N.B. "capacitors" indicated here are electrolytic capacitors located in the onboard
                                        switching supply area).
                                        (N.B. #2 : I could not find a 3300 microF aluminum-polymer with a higher voltage
                                        than 6.3 V.)

                                        1 - Motherboard #1 : this is an Asrock K7VT2 (socket A) that still works well. To put it on test
                                        I replaced capacitors with aluminum-polymer.
                                        3300 microF/6.3 V. x 4 replaced by 3300 microF/6.3 V. (KYOCERA...
                                        03-21-2025, 02:46 PM
                                      • slybunda
                                        AA and AAA battery charger capacitors?
                                        by slybunda
                                        hey all, iv got my favourite battery charger here which iv had for many years probably 15 years now or maybe even more. it still works good but thought id open it up to clean the dust out of it, lots of dust inside but now its clean and noticed 4 capacitors inside it and wondered if i should replace them.
                                        it has inside:
                                        2 x 47uf 16v caps 105c branded as Su'scon (lol sounds sus to me)
                                        2 x 470uf 16v LZ105c branded as G.Luxon

                                        not heard of these brands are they any good?

                                        iv attached photos of the charger and the board inside for an idea on the type of...
                                        12-24-2023, 04:41 AM
                                      • sam_sam_sam
                                        Panasonic switching power supply daughter board has two 27uf @ 50 volt capacitors which I do not keep in stock
                                        by sam_sam_sam
                                        I did not have any 27uf @ 50 volt capacitors but one nice thing is that it has enough room for two capacitors in parallel a 22uf and a 4.7uf @ 50 volts 22 plus 4.7 equals 26.7uf which so very close to 27uf I will show some pictures of it sometime tomorrow

                                        This is one of the shit est boards I seen in a very long time and it was the daughter board the traces just lifting off the board I had to use the capacitor leads to repair the the traces and the main board is not any better because I had to repair several traces for the daughter board to the main board

                                        After all of...
                                        07-13-2024, 08:14 PM
                                      • Ady2017
                                        Are there any datasheets available for Elna RJG capacitors?
                                        by Ady2017
                                        I have a 2007-era Panasonic VHS combo that is full of of Elna RJG capacitors. I am trying to test the capacitors to diagnose the machine and then select replacement capacitors but I can not find any datasheets for them. I did find a Elna catalogue from 2007-2008 but there is no mention of this capacitor series. Where these specially made for Panasonic and so not made available to the public? Any ideas what to find out what the ESR values should be without the datasheets? They are all between 10V and 50V and 47uF and 1800uF. None are leaking or bulged but I know that they need to be tested to be...
                                        05-25-2025, 02:19 PM
                                      • ctroxtell
                                        Samsung UN70tu7000wxza no standby light, do I have bad capacitors?
                                        by ctroxtell
                                        I picked up a 70" Samsung UN70TU7000WXZA. The original owner said they were watching it when the power surged and knocked it out. I pulled the back off the TV and disconnected the main board from the power board, and the LED backlight came on, which I was told meant the power board was good. When everything is plugged in the standby light will not come on, looking at the main board BN94-17775A with a thermal imaging gun I can see one of the chips labeled 3202 is 251 degrees F just sitting idle. I found a replacement board, BN94-16115X; this board has the same symptoms, except it is a different...
                                        01-03-2025, 08:57 PM
                                      • Loading...
                                      • No more items.
                                      Working...