High-voltage polymer and solid models steer production trend

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Big Pope
    Approved Vendor
    • Dec 2005
    • 426
    #1

    High-voltage polymer and solid models steer production trend

    http://www.globalsources.com/gsol/I/Aluminum-electrolytic/a/9000000075242.htm

    Nice news and know more the trend of aluminum electrolytic capacitors.

    Also, have some information about GSC there.
    Last edited by willawake; 03-15-2007, 04:09 AM. Reason: fix link
    My SAMXON Capacitors Database HERE!!

    X-CON is a new brand for SAMXON's Polymer Capacitors.
    Tags: None
    • willawake
      Super Modulator
      • Nov 2003
      • 8457
      • Greece
      #2
      Re: High-voltage polymer and solid models steer production trend

      hey those partsnic polymer caps are interesting. i think i have seen those before but not being able to identify.

      Competition also compels GSE to keep its prices stable. The company stresses that since it manufactures its own raw material, it can maintain its quotes at a competitive level.
      shit in -----> shit out
      capacitor lab yachtmati techmati

        Comment

        Previous template Next

        Related Topics

        Collapse
        • sikocan
          Lenovo X1 Carbon 9th Gen Black Screen
          by sikocan
          I believe Chip 2 is BIN is the main one as it contained the Windows product key, marked with XXXXX for now.

          SN: PF3G1REP
          MODEL: 20KW-00J1AU

          PROBLEM: Turns on blank screen, charging circuitry motherboard looks good. I have tried another firmware here - but resulted in 5V will not go to 20v due to different PD firmware I believe - using the current firmware it does go to 20V.

          Requesting a firmware clean/BIOS region cleaned. Here is output from ME Analyzer:
          ╔═══════════════════════════════════════════╗...
          06-24-2025, 09:01 PM
        • cajoeg
          Insignia NS-LCD019-09 issue: Power light turns blue for 3 seconds, the flashes red before going solid read again
          by cajoeg
          Hello, I'm new to the group and to trying to repair a LCD TV. During the past few years, I've been collecting/repairing/restoring vintage personal computers (Commodore, Apple II, Atari, TRS-80, Texas Instruments, and Timex Sinclair). This has been my retirement hobby. Now I've gotten interested in trying to repair a LCD TV that I have and used regularly when working on vintage computers.

          The LCD I'm working on is a Insignia NS-LCD019. I've downloaded the service manual that I could find, but it must be a different revision since not too many items in the service manual match the TV...
          02-10-2025, 04:01 PM
        • Document Archive
          SK6281 Skymedi USB Disk Production Tool User Manual
          by Document Archive
          SK6281 Skymedi USB Disk Production Tool User Manual...
          10-18-2024, 03:14 AM
        • eccerr0r
          solid polymer electrolytic capacitor go boom?
          by eccerr0r
          Anyone had a solid polymer capacitor fail for whatever reason?

          How do they fail? Do they explode, go open, short out, ?

          How about for different reasons: forcing excessive ripple current, overheating, voltage too high, reverse voltage?

          Just wondering about the causes for a potential shorted solid polymer capacitor... trying to debug a board that has a ~4Ω "short" on a track... it may or may not be a capacitor but was wondering what if it were...
          07-25-2022, 07:12 AM
        • ChaosLegionnaire
          how do u use solid rosin flux?
          by ChaosLegionnaire
          i recently bought a block of solid rosin flux from aliexpress. i intend to use it for reflowing cold solder joints and cracked solder joints. but im not sure how im supposed to be using it? do i just break off bits and pieces of it with a knife and put the bits of solid rosin on the bad joint im soldering then bring on the iron?

          i tried asking google and they pointed me to a headphone forum and eevblog? and they said to just dip the soldering iron tip into the solid block. a small piece of flux will be attached to the soldering iron tip end and im supposed to use that to reflow...
          06-24-2020, 02:34 PM
        • Loading...
        • No more items.
        Working...