Re: Sony XBR-65X930D No screen
@ fp1 fuse it only shows 0.6mv on both ends of the fuse.
-
Re: Sony XBR-65X930D No screen
I will check this as soon as I get back to the house and post my findings thank you.Leave a comment:
-
Re: Sony XBR-65X930D No screen
while powered up, see if theres about 12 volts on each side of the tcon fuse, neg. probe on chassis ground, pos. probe on each side of fuse.Leave a comment:
-
Sony XBR-65X930D No screen
HI, everyone I want to say thanks for the help on the samsung. now it's my sons Sony XBR-65x930D I am trying to fix I've replaced the dps and main board did the firmware update, now I have the white light on bottom of the tv and it seem to turn on and off but no picture not sure how to precede could some possibly point me in the right direction.
-
Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!
My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.
This time the original cable broke too close to the screen, it can't be fixed without tearing the screen... -
Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".
It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...07-31-2025, 08:37 PM -
Hi, this is my first post - so thanks in advance for any assistance.
I have a Sony XBR 65x930D (manufactured in July-2016), which was initially showing a black screen, faint backlight glow, and played musical sounds when powered up. After some experimenting (mostly unplugging cable and re-plugging), including attempting hard-reset and firmware update, it is now showing video, but the left side of the screen is fuzzy/grainy. (See attached pic)
I am trying to decide if this could be the T-CON board, or the DPS board.
When I press on the upper right of the DPS... -
Hello again everyone,
This is my latest mission, to try getting this Sony tv back to normal working order…
I've only just got it today, when you power it up everything is as should be, in fact it works perfectly for a few minutes then the screen starts getting horizontal lines on & eventually the full screen goes back, I will upload photos of the problem & also some photos of the board etc. You might notice that I'm busy trying the tape method, I'm not sure exactly where the clock lines are so I'm just guessing & hoping for the best lol . I've already tried... -
Hi,
I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
Leave a comment: