Philips 42PFL6158K/12 stuck on "registering..."

[CDiazF]

Re: Philips 42PFL6158K/12 stuck on "registering..."

have you asked who you bought the new board off for help ?

Yep, he just sent me a file to format RWData and something more, I executed that file, then reinstalled the the firmware but no results.

[Diah]

Re: Philips 42PFL6158K/12 stuck on "registering..."

inter factory mode as described at post #2
you have there 2 option try one after one
1- Reset MAC Address
2- VIRGIN_MODE

[CDiazF]

Re: Philips 42PFL6158K/12 stuck on "registering..."

inter factory mode as described at post #2
you have there 2 option try one after one
1- Reset MAC Address
2- VIRGIN_MODE

I couldn't enter there with the sequence posted at post #2, all far I went was with the "062596 + INFO / OK" sequence, but in that menu there isn't any of that options, no reset mac address and no virgin mode, not even a hard reset option.

Is there any other sequences that could enter that options u post?

Ty!

[Davi.p]

Re: Philips 42PFL6158K/12 stuck on "registering..."

se l'è inventate sto babba..

[lotas]

Re: Philips 42PFL6158K/12 stuck on "registering..."

I couldn't enter there with the sequence posted at post #2, all far I went was with the "062596 + INFO / OK" sequence, but in that menu there isn't any of that options, no reset mac address and no virgin mode, not even a hard reset option.

Is there any other sequences that could enter that options u post?

Ty!

Download the service manual and many questions will disappear.

[Davi.p]

Re: Philips 42PFL6158K/12 stuck on "registering..."

i remeber those 6xx8 series manual declares "bad cpu>replace board" is it right?

[lotas]

Re: Philips 42PFL6158K/12 stuck on "registering..."

No, it says how to get into the service mode correctly and what should be written.

[Diah]

Re: Philips 42PFL6158K/12 stuck on "registering..."

How to Activate the Factory mode
To activate the Factory mode, use the following method:
• Press the following key sequence on the remote control
transmitter: from the “menu/home” press “1999”, directly
followed by the “Back/Return” button. Do not allow the
display to time out between entries while keying the
sequence.